28 ноября | 2024г. | 11:53:48


АвторТема: AR-P от Taapat II версия (part-3)  (Прочитано 493392 раз)

0 Пользователей и 2 Гостей смотрят эту тему.

Оффлайн artem l

  • Великий Джедай
  • ****
  • Сообщений: 604
  • Поблагодарили: 565
  • Уважение: +2
AR-P от Taapat II версия (part-3)
« Ответ #375: 26 сентября | 2015г. | 19:16:02 »
0
ser6, у меня так же при выключении зелень,креш походу такой же как выше,и ещё иногда при листании каналов спинер появляется,так что делать нужно?установить флешку с файлом подкачки?или не поможет?

Оффлайн Ser6

  • Друзья Джедаев
  • *****
  • Сообщений: 12328
  • Поблагодарили: 29869
  • Уважение: +122
AR-P от Taapat II версия (part-3)
« Ответ #376: 26 сентября | 2015г. | 19:16:09 »
0
и что с этим делать
В этой теме такие крэши выкладывали довольно часто - полистайте, почитайте, там и решения есть.  :read:

Оффлайн Pavel P

  • Джедай
  • ***
  • Сообщений: 369
  • Поблагодарили: 45
  • Уважение: -5
AR-P от Taapat II версия (part-3)
« Ответ #377: 28 сентября | 2015г. | 15:32:39 »
0
Остается fav,radio
есть такое... раньше при нажатии fav или синей кнопки высвечивали фавориты тв а сейчас и радио через раз

Оффлайн rx5670

  • Джедай
  • ***
  • Сообщений: 359
  • Поблагодарили: 466
  • Уважение: 0
AR-P от Taapat II версия (part-3)
« Ответ #378: 29 сентября | 2015г. | 16:45:01 »
0
есть такое... раньше при нажатии fav или синей кнопки высвечивали фавориты тв а сейчас и радио через раз
У меня была проблема с фаворитами после того, как натвикал разного в настройках и поставил несколько плугинов.
Методом исключения виновника нашел: забакапил /etc/enigma2/settings и стал в нем подчищать постепенно.
Можно и совсем его удалить. После рестарта енигма запустит свой конфигуратор и создаст его заново.

Добавлено  29 сентября | 2015г. | 16:56:31
Настройки hdmi-cec лежат только в /etc/enigma2/settings или еще где-то?
Плугин hdmi-cec на фиде и имеющийся в имадже cec это одно и тоже или разное?

Оффлайн TaapatАвтор темы

  • Мастер Джедай
  • **
  • Сообщений: 3543
  • Поблагодарили: 10700
  • Уважение: +60
AR-P от Taapat II версия (part-3)
« Ответ #379: 29 сентября | 2015г. | 19:48:41 »
0
rx5670, настройки плугина hdmi-cec только в /etc/enigma2/settings.
Плугин на фиде и в имидже одно и тоже.
  • Zgemma H7S | Zgemma H.S | Edision OS mini + | Amiko SHD-8900 Alien | VU+ Solo2 | Gi ET11000 4K
taapat.blogspot.com

Оффлайн Jason 13

  • Падаван
  • *
  • Сообщений: 30
  • Поблагодарили: 35
  • Уважение: 0
AR-P от Taapat II версия (part-3)
« Ответ #380: 29 сентября | 2015г. | 21:08:03 »
0
Здравствуйте обновил кто нибудь этот имидж я обновил где то 10мб  но изменения не увидел как работал стабильно так и работает.
Cтоит его обновить его и дальше или можно не заморачиваться по поводу обновлении?

Добавлено  29 сентября | 2015г. | 21:12:32
rx5670, настройки плугина hdmi-cec только в /etc/enigma2/settings.
Плугин на фиде и в имидже одно и тоже.

Я вообще то удалил hdmi cec так как рес подключен к телеку через скарт и да на фиде и в имидже палгины одинаковые убедился когда переустановил alternative softcam manager я думал на фиде другая версия но оказалось одно и тоже.
  • Gi S8120 E2 Open AR-P от Taapat;Openbox SX4
Все что делается все к лучшему!!!

Оффлайн 024730

  • Рыцарь Джедай
  • *****
  • Сообщений: 2197
  • Поблагодарили: 1742
  • Уважение: +15
AR-P от Taapat II версия (part-3)
« Ответ #381: 30 сентября | 2015г. | 06:59:49 »
0
один пакет не хочет обновляться
Спойлер   :
ipkg install -force-overwrite -force-downgrade /tmp/vsftpd_3.0.3-1_sh4.ipk


Upgrading vsftpd from 3.0.2-1 to 3.0.3-1 on root.

update-rc.d: //etc/init.d/vsftpd exists during rc.d purge (use -f to force)

To remove package debris, try `opkg remove vsftpd`.
To re-attempt the install, try `opkg install vsftpd`.

Collected errors:
 * pkg_run_script: package "vsftpd" prerm script returned status 1.
 * prerm_upgrade_old_pkg: prerm script for package "vsftpd" failed
 * opkg_install_cmd: Cannot install package vsftpd.

Оффлайн yuriy1975h

  • Великий Джедай
  • ****
  • Сообщений: 840
  • Поблагодарили: 2632
  • Уважение: -3
AR-P от Taapat II версия (part-3)
« Ответ #382: 30 сентября | 2015г. | 07:45:05 »
0
один пакет не хочет обновляться
Игорь у меня без проблем
Спойлер   :
[ Гостям не разрешен просмотр вложений ] [ Гостям не разрешен просмотр вложений ]
  • ET11000,самсунг NU 8000

Оффлайн TaapatАвтор темы

  • Мастер Джедай
  • **
  • Сообщений: 3543
  • Поблагодарили: 10700
  • Уважение: +60
AR-P от Taapat II версия (part-3)
« Ответ #383: 30 сентября | 2015г. | 08:37:01 »
0
один пакет не хочет обновляться
У тебя точно стоит сборка с всеми последними обновлениями? rc.d я поправил в феврале.
  • Zgemma H7S | Zgemma H.S | Edision OS mini + | Amiko SHD-8900 Alien | VU+ Solo2 | Gi ET11000 4K
taapat.blogspot.com

Оффлайн 024730

  • Рыцарь Джедай
  • *****
  • Сообщений: 2197
  • Поблагодарили: 1742
  • Уважение: +15
AR-P от Taapat II версия (part-3)
« Ответ #384: 30 сентября | 2015г. | 11:22:29 »
0
У тебя точно стоит сборка с всеми последними обновлениями? rc.d я поправил в феврале.
речь идет о update-rc.d_0.1-3_all?
Стоял update-rc.d от 2boom на вашем февральском все нормально установилось,вопрос снят.

Оффлайн yuriy1975h

  • Великий Джедай
  • ****
  • Сообщений: 840
  • Поблагодарили: 2632
  • Уважение: -3
AR-P от Taapat II версия (part-3)
« Ответ #385: 01 октября | 2015г. | 10:07:08 »
0
Taapat посмотрите пожалуйста лог загрузки что там есть такое что при установки плагина по закачке епг даёт чуть ли не на каждое действие вращение спинера.Если не устанавливать этот плагин то этого не наблюдается.Свап на флешке имеется.
Спойлер   :





        * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
        *                               ___  ______         ______      *
        *                              / _ \ | ___ \        | ___ \     *
        *    ___   _ __    ___  _ __  / /_\ \| |_/ / ______ | |_/ /     *
        *   / _ \ | '_ \  / _ \| '_ \ |  _  ||    / |______||  __/      *
        *  | (_) || |_) ||  __/| | | || | | || |\ \         | |         *
        *   \___/ | .__/  \___||_| |_|\_| |_/\_| \_|        \_|         *
        *         | |                                                   *
        *         |_|      ----openAR-Project----                       *
        *                                                               *
        * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *




BusyBox v1.24.0.git (2015-08-02 07:41:55 EEST) built-in shell (ash)


spark:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo ">>> DONE <<<";

>>> DONE <<<

spark:~#
clear

spark:~#
init 4


spark:~#
en
igma2


PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3

[eInit] + (1) Background File Eraser


[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager

STMFB accel interface available

[eInit] + (9) GFBDC
[fb] 16384k video mem
8284k usable video mem

[gFBDC] resolution: 2d0x576x32 stride=2880, 6664kB available for acceleration surfaces.
[eInit] + (9) gLCD
[eLCD] (32x32x8) buffer 0x6e4a58 1024 bytes, stride 32
[gLCDDC] resolution: 32x32x8 stride=32
[eInit] + (9) Font Render Class
[FONT] initializing lib...

[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
[eInit] + (10) gRC
[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) DVB-CI UI
[eInit] + (20) RC Input layer
[eInit] + (20) misc options
[eInit] + (20) AVSwitch Driver
[eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory
[eInit] + (21) input device driver
[eRCInputEventDriver] devicename=fulan front panel buttons

[eRCInputEventDriver] EVIOCGRAB: Device or resource busy
[eRCDeviceInputDev] device "fulan front panel buttons" is a remotecontrol
[eRCInputEventDriver] devicename=TDT RC event driver
[eRCInputEventDriver] EVIOCGRAB: Device or resource busy
[eRCDeviceInputDev] device "TDT RC event driver" is a remotecontrol
[eRCInputEventDriver] devicename=remote control
[eRCInputEventDriver] EVIOCGRAB: Device or resource busy
[eRCDeviceInputDev] device "remote control" is a remotecontrol
[eInputDeviceInit] Found 3 input devices.
[eInit] + (22) Hdmi CEC driver
[eHdmiCEC] cannot open /dev/hdmi_cec: Too many users
[eInit] + (30) eActionMap
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] eDVBCIInterfaces->setInputSource(0, 0)
[CI] eDVBCIInterfaces->setInputSource(1, 1)
[CI] done, found 0 common interface slots
[eInit] + (35) CA handler
[eInit] + (40) eServiceCenter

[eServiceCenter] settings instance.
[eInit] + (41) eServiceFactoryDVD
[eInit] + (41) eServiceFactoryMP3
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryFS

[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) Encoders
[eInit] + (41) Stream server
[eServerSocket] ERROR on bind: Address already in use
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)

[eDVBDB] loaded 63 channels/transponders and 810 services

[eDVBResourceManager] scanning for frontends..
[eDVBFrontend] opening frontend 0
[eDVBFrontend] opening /dev/dvb/adapter0/frontend0 failed: Device or resource busy
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBResourceManager] found 1 adapter, 0 frontends(0 sim) and 2 demux
[eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)

[MAIN] Loading spinners...
[ePNG] couldn't open /etc/enigma2/spinner/wait1.png

[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait8.png
[MAIN] found 7 spinner!

[MAIN] executing main
[setIoPrio] best-effort level 3 ok

[gRC] main thread is non-idle! display spinner!

[Misc_Options] 12V output detected

[HardwareInfo] Scanning hardware info
Detected: spark

[Harddisk] enumerating block devices...

new Harddisk
 sda -> /dev/sda -> /dev/sda

Reading satellites.xml

sec config cleared

slot: 0 configmode: advanced

add 48 to 2
add 360 to 4
add 3560 to 5

sec config completed

[Picon] adding path: /media/usb/picon/

[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe01.tv

[eDVBDB] 13 entries in Bouquet userbouquet.dbe01.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe02.tv
[eDVBDB] 36 entries in Bouquet userbouquet.dbe02.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe03.tv
[eDVBDB] 13 entries in Bouquet userbouquet.dbe03.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe04.tv
[eDVBDB] 34 entries in Bouquet userbouquet.dbe04.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe05.tv
[eDVBDB] 13 entries in Bouquet userbouquet.dbe05.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe06.tv
[eDVBDB] 10 entries in Bouquet userbouquet.dbe06.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 10 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv

[eDVBDB] 624 entries in Bouquet userbouquet.LastScanned.tv
[eDVBDB] 8 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe01.radio
[eDVBDB] 0 entries in Bouquet userbouquet.dbe01.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe02.radio
[eDVBDB] 0 entries in Bouquet userbouquet.dbe02.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] 3 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...

[FONT] adding font /usr/share/fonts/nmsbd.ttf
[FONT] OK (Regular)

[FONT] adding font /usr/share/fonts/andale.ttf
[FONT] OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf
[FONT] OK (Console)

[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf[FONT] OK (Replacement)

[gFBDC] resolution: 500x720x32 stride=5120, 4684kB available for acceleration surfaces.
[SKIN] loading include: /usr/share/enigma2/MetropolisHD/skin_templates.xml

[FONT] adding font /usr/share/fonts/lcd.ttf
[FONT] OK (LCD)

[FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf
[FONT] OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf[FONT] OK (Console)
[FONT] adding font /usr/share/fonts/DroidSans.ttf
[FONT] OK (Regular)
[FONT] adding font /usr/share/fonts/OpenSans-Regular.ttf
[FONT] OK (OpenSans)

[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf
[FONT] OK (Subs)

[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf
[FONT] OK (Subsi)

[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf[FONT] OK (Subsb)

[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf
[FONT] OK (Subsz)

Unknown device type: TDT RC event driver
Unknown device type: fulan front panel buttons
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

Activating keymap: Default (US)

[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh

Activating language Р СѓСЃСЃРєРёР№

[eDVBDB] Renumbering...

[eTuxttxtApp] enable caching

[ePopen] command: ip -o addr show dev eth0
[eConsoleAppContainer] Starting /bin/sh

[ePopen] command: ip -o addr show dev ra0
[eConsoleAppContainer] Starting /bin/sh

Plugin  Extensions/WebInterface failed to load:
 No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface

[ShootYourScreen] set language to  ru

[ShootYourScreen] set language to  ru

[ShootYourScreen] fallback to default Enigma2 Translation for Harddisk

[ShootYourScreen] fallback to default Enigma2 Translation for USB Device
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 2)

[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 3)

[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 5)
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 6)
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 7)

[ShootYourScreen] fallback to default Enigma2 Translation for Network mount

[ShootYourScreen] fallback to default Enigma2 Translation for Network mount
[ShootYourScreen] fallback to default Enigma2 Translation for OSD

getModeList for port Component

getModeList for port Scart
getModeList for port
HDMI
getModeList for port HDMI-PC

hotplug on dvi

-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto

setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, wss 16:9 bestfit auto

updateColor:  HDMI

--> setting contrast to: 128

close failed in file object destructor:
IOError: [Errno 14] Bad address
--> setting saturation to: 128
close failed in file object destructor:
IOError: [Errno 14] Bad address
--> setting hue to: 128
close failed in file object destructor:
IOError
: [Errno 14] Bad address
--> setting brightness to: 128
close failed in file object destructor:
IOError: [Errno 14] Bad address
--> applying psi values
close failed in file object destructor:
IOError: [Errno 5] Input/output error

[ePopen] command: ping -c1 -W2 192.168.0.101
[eConsoleAppContainer] Starting /bin/sh

[HddManager] MountOnStart

[ePopen] command: swapon /media/hdd/swapfile

[eConsoleAppContainer] Starting /bin/sh

[ShootYourScreen] start....

[SKIN] Parsing embedded skin <embedded-in-'ServNumScreen'>

[Skin] Error: {MetropolisHD/skin.xml}: color 'transparent2' must be #aarrggbb or valid named color. Please contact the skin's author!

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile
[SKIN] Parsing embedded skin <embedded-in-'PermanentClockScreen'>

[eEPGCache] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>

[PiconProv] use path: /tmp/piconProv/


RemovePopup, id = ZapError

setValue 9


[ePopen] command: ps
[eConsoleAppContainer] Starting /bin/sh

playing 1:0:1:5:D:1:DE82A07:0:0:0:

getResolvedKey config.usage.remote_fallback
failed !! (Typo??)

[gRC] main thread is non-idle! display spinner!

[eEPGCache] 307770 events read from /media/hdd/epg.dat

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000d:0001
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

[ePopen] command: route -n | grep  eth0
[eConsoleAppContainer] Starting /bin/sh

[ePopen] command:
route -n | grep  ra0
[eConsoleAppContainer] Starting /bin/sh

[Alternative SoftCam Manager] /usr/bin/cam/oscam-sh4 -bc /var/keys/
[ePopen] command: /usr/bin/cam/oscam-sh4 -bc /var/keys/
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished None None

[ePopen] command: ping -c1 -W2 192.168.0.105
[eConsoleAppContainer] Starting /bin/sh

192.168
0.0.0.0

nameservers: [[192, 168, 0, 1]]
read configured interface:
{'lo': {'dhcp': False}, 'ra0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1], 'address': [192, 168, 0, 100]}, 'eth0': {'dhcp': True}}
self.ifaces after loading:
{'ra0': {'preup': '\tpre-up wpa_supplicant -ira0 -c/etc/wpa_supplicant.ra0.conf -B -dd -Dwext || true\n', 'predown': '\tpre-down wpa_cli -ira0 terminate || true\n', 'ip': [192, 168, 0, 100], 'up': True, 'mac': 'fc:75:16:84:3d:0c', 'dhcp': False, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}

AT plugin not found
SerienRecorder plugin not found
ER plugin not found

[OpenWebif] no plugins to load

[OpenWebif] started on 80

[AutoMount.py] CheckMountPointFinished None None

action ->  InfobarShowHideActions toggleShow

action ->  ChannelSelectBaseActions keyLeft

action ->  ChannelSelectBaseActions keyRight

action ->  ChannelSelectBaseActions keyRight

action ->  ChannelSelectBaseActions keyRight

action ->  OkCancelActions ok

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
playing 1:0:19:2F45:C:70:1680000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0070
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10

RemovePopup, id = ZapError
AddPopup, id = ZapError

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

action ->  GlobalActions volumeDown

setValue 7

action ->  GlobalActions volumeDown

setValue 5

action ->  GlobalActions volumeDown

setValue 3

action ->  InfobarShowHideActions toggleShow

action ->  ChannelSelectBaseActions keyLeft

action ->  ChannelSelectBaseActions keyLeft

action ->  OkCancelActions ok

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
playing 1:0:1:17E8:C:55:300000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0055
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

action ->  InfobarChannelSelection keyUp

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
playing
 1:0:1:17E8:C:55:300000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
new service started! trying to download cuts!
download failed, no cuesheet interface

RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0055
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

action ->  InfobarChannelSelection keyUp

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

playing 1:0:1:17E8:C:55:300000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0055
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

action ->  InfobarChannelSelection keyUp

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
playing 1:0:1:17E8:C:55:300000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0055
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

action ->  InfobarChannelSelection keyUp

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
playing
1:0:1:17E8:C:55:300000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
new service started! trying to download cuts!

download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0055
[eDVBServicePMTHandler] allocate Channel: res -7
[eDVBServicePlay] DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?

action ->  WizardActions ok

[SKIN] Parsing embedded skin <embedded-in-'epgdn2'>

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

libpng warning: iCCP: known incorrect sRGB profile

action ->  SetupActions cancel

action ->  WizardActions back

action ->  InfobarMenuActions mainMenu

loading mainmenu XML...

PluginBrowser PluginBrowser
TimerEdit TimerEditList

action ->  OkCancelActions ok
okbuttonClick

Standby TryQuitMainloop
Standby TryQuitMainloop
SleepTimerEdit SleepTimerEdit
Standby Standby
Standby TryQuitMainloop

action ->  OkCancelActions ok
okbuttonClick

[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>

[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>

connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]

[Alternative SoftCam Manager] stopping oscam-sh4
[ePopen] command:
 killall -15 oscam-sh4
[eConsoleAppContainer] Starting /bin/sh

[eDVBDB] ---- saving lame channel db

[eDVBDB] saved 63 channels and 810 services!

[eDVBResourceManager] release cached channel (timer timeout)

[eEPGCache] store epg to realpath '/media/hdd/epg.dat'

[eEPGCache] 307607 events written to /media/hdd/epg.dat

[gRC] main thread is non-idle! display spinner!

[eDVBLocalTimeHandler] set RTC to previous valid time

[eInit] - (41) eServiceFactoryDVD

[eInit] - (41) eServiceFactoryMP3

[eInit] - (41) eServiceFactoryHDMI
[eInit] - (41) eServiceFactoryM2TS
[eInit] - (41) eServiceFactoryFS

[eInit] - (41) eServiceFactoryDVB
[eInit] - (41) Encoders
[eInit] - (41) Stream server
[eInit] - (40) eServiceCenter
[eInit] - (35) CI Slots

[eInit] - (35) CA handler

[eInit] - (30) eActionMap
[eInit] - (22) Hdmi CEC driver
[eInit] - (21) input device driver
[eInit] - (20) DVB-CI UI
[eInit] - (20) RC Input layer
[eInit] - (20) misc options
[eInit] - (20) AVSwitch Driver
[eInit] - (15) eWindowStyleManager
[eInit] - (10) gRC
[gRC] waiting for gRC thread shutdown
[gRC] thread has finished
[eInit] - (9) GFBDC
[eInit] - (9) gLCD
[eInit] - (9) Font Render Class
[eInit] - (8) graphics acceleration manager
[eInit] - (5) Tuxtxt
[eInit] - (1) Background File Eraser
[eInit] reached rl -1

spark:~#
init 6

Немного по удалял не нужных плагинов и снял лог на другом скине вроде получше стало.
Спойлер   :



        * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
        *                               ___  ______         ______      *
        *                              / _ \ | ___ \        | ___ \     *
        *    ___   _ __    ___  _ __  / /_\ \| |_/ / ______ | |_/ /     *
        *   / _ \ | '_ \  / _ \| '_ \ |  _  ||    / |______||  __/      *
        *  | (_) || |_) ||  __/| | | || | | || |\ \         | |         *
        *   \___/ | .__/  \___||_| |_|\_| |_/\_| \_|        \_|         *
        *         | |                                                   *
        *         |_|      ----openAR-Project----                       *
        *                                                               *
        * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *




BusyBox v1.24.0.git (2015-08-02 07:41:55 EEST) built-in shell (ash)


spark:~#
-------------------- < Script > ----------------------------
uname -r >/tmp/boxtype.dcc; echo
 ">>> DONE <<<";

>>> DONE <<<

spark:~#
clear


spark:~#
i
n
i
t
 
4


spark:~#
e
n
i
g
m
a
2


PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3

[eInit] + (1) Background File Eraser
[eInit] + (5) Tuxtxt
[eInit] + (8) graphics acceleration manager
STMFB accel interface available

[eInit] + (9) GFBDC
[fb] 16384k video mem
8284k usable video mem

[gFBDC] resolution: 2d0x576x32 stride=2880, 6664kB available for acceleration surfaces.
[eInit] + (9) gLCD
[eLCD] (32x32x8) buffer 0x6e4a58 1024 bytes, stride 32
[gLCDDC] resolution: 32x32x8 stride=32
[eInit] + (9) Font Render Class
[FONT] initializing lib...

[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...

[eInit] + (10) gRC

[gRC] thread created successfully
[eInit] + (15) eWindowStyleManager
[eInit] + (20) DVB-CI UI
[eInit] + (20) RC Input layer
[eInit] + (20) misc options
[eInit] + (20) AVSwitch Driver
[eAVSwitch] failed to open /dev/dbox/fp0 to monitor vcr scart slow blanking changed: No such file or directory
[eInit] + (21) input device driver

[eRCInputEventDriver] devicename=fulan front panel buttons
[eRCDeviceInputDev] device "fulan front panel buttons" is a remotecontrol
[eRCInputEventDriver] devicename=TDT RC event driver
[eRCDeviceInputDev] device "TDT RC event driver" is a remotecontrol
[eRCInputEventDriver] devicename=remote control
[eRCDeviceInputDev] device "remote control" is a remotecontrol
[eInputDeviceInit] Found 3 input devices.
[eInit] + (22) Hdmi CEC driver
[eInit] + (30) eActionMap
[eInit] + (35) CI Slots
[CI] scanning for common interfaces..
[CI] eDVBCIInterfaces->setInputSource(0, 0)
[CI] eDVBCIInterfaces->setInputSource(1, 1)
[CI] done, found 0 common interface slots
[eInit] + (35) CA handler
[eInit] + (40) eServiceCenter
[eServiceCenter] settings instance.
[eInit] + (41) eServiceFactoryDVD
[eInit] + (41) eServiceFactoryMP3
[eInit] + (41) eServiceFactoryHDMI
[eInit] + (41) eServiceFactoryM2TS
[eInit] + (41) eServiceFactoryFS
[eInit] + (41) eServiceFactoryDVB
[eInit] + (41) Encoders
[eInit] + (41) Stream server
[eInit] reached rl 70
[eDVBDB] ---- opening lame channel db
[eDVBDB] reading services (version 4)

[eDVBDB] loaded 63 channels/transponders and 810 services
[eDVBResourceManager] scanning for frontends..
[eDVBFrontend] opening frontend 0
[eDVBFrontend] close frontend 0
[eDVBAdapterLinux] get demux 0
[eDVBAdapterLinux] get demux 1
[eDVBResourceManager] found 1 adapter, 1 frontends(1 sim) and 2 demux
[eDVBLocalTimeHandler] Use valid Linux Time :) (RTC?)
[eEPGCache] Initialized EPGCache (wait for setCacheFile call now)

[MAIN] Loading spinners...
[ePNG] couldn't open /etc/enigma2/spinner/wait1.png

[ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait8.png
[MAIN] found 7 spinner!
[MAIN] executing main
[setIoPrio] best-effort level 3 ok

[eDVBFrontend] Failed to open /dev/dbox/fp0

[Misc_Options] 12V output detected
[HardwareInfo] Scanning hardware info
Detected: spark

[Harddisk] enumerating block devices...

new Harddisk
 sda -> /dev/sda -> /dev/sda

[gRC] main thread is non-idle! display spinner!

Reading satellites.xml

sec config cleared

[eDVBFrontend] setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: advanced

add 48 to 2
add 360 to 4
add 3560 to 5

sec config completed

[Picon] adding path: /media/usb/picon/

[eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv

[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe01.tv
[eDVBDB] 13 entries in Bouquet userbouquet.dbe01.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe02.tv
[eDVBDB] 36 entries in Bouquet userbouquet.dbe02.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe03.tv
[eDVBDB] 13 entries in Bouquet userbouquet.dbe03.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe04.tv
[eDVBDB] 34 entries in Bouquet userbouquet.dbe04.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe05.tv
[eDVBDB] 13 entries in Bouquet userbouquet.dbe05.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe06.tv

[eDVBDB] 10 entries in Bouquet userbouquet.dbe06.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
[eDVBDB] 10 entries in Bouquet userbouquet.favourites.tv
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
[eDVBDB] 624 entries in Bouquet userbouquet.LastScanned.tv
[eDVBDB] 8 entries in Bouquet bouquets.tv
[eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe01.radio
[eDVBDB] 0 entries in Bouquet userbouquet.dbe01.radio
[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.dbe02.radio
[eDVBDB] 0 entries in Bouquet userbouquet.dbe02.radio

[eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
[eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
[eDVBDB] 3 entries in Bouquet bouquets.radio
[eDVBDB] Renumbering...

[FONT] adding font /usr/share/fonts/nmsbd.ttf
[FONT] OK (Regular)

[FONT] adding font /usr/share/fonts/andale.ttf
[FONT] OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf
[FONT] OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf[FONT] OK (Replacement)

[gFBDC] resolution: 500x720x32 stride=5120, 4684kB available for acceleration surfaces.

[FONT] adding font /usr/share/enigma2/nBlack51/fonts/ks.ttf
[FONT] OK (Regular)

[FONT] adding font /usr/share/fonts/lcd.ttf[FONT] OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf[FONT] OK (Replacement)
[FONT] adding font /usr/share/enigma2/nBlack51/fonts/ks.ttf[FONT] OK (Console)

[FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf
[FONT] OK (Subs)

[FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf[FONT] OK (Subsi)

[FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf
[FONT] OK (Subsb)
[FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf
[FONT] OK (Subsz)

Unknown device type: fulan front panel buttons
Unknown device type: TDT RC event driver
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >

Activating keymap:
 Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
[eConsoleAppContainer] Starting /bin/sh

Activating language Р СѓСЃСЃРєРёР№

[eDVBDB] Renumbering...

[eTuxttxtApp] enable caching

[ePopen] command: ip -o addr show dev eth0

[eConsoleAppContainer] Starting /bin/sh
[ePopen] command: ip -o addr show dev ra0
[eConsoleAppContainer] Starting /bin/sh

[ShootYourScreen] set language to  ru

[ShootYourScreen] set language to  ru

[ShootYourScreen] fallback to default Enigma2 Translation for Harddisk

[ShootYourScreen] fallback to default Enigma2 Translation for USB Device
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 2)

[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 3)

[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 5)
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 6)
[ShootYourScreen] fallback to default Enigma2 Translation for Transcend 4GB (Partition 7)

[ShootYourScreen] fallback to default Enigma2 Translation for Network mount

[ShootYourScreen] fallback to default Enigma2 Translation for Network mount

[ShootYourScreen] fallback to default Enigma2 Translation for OSD

getModeList for port Component

getModeList for port Scart
getModeList for port HDMI

getModeList for port HDMI-PC

hotplug on dvi

-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto
-> setting aspect, policy, wss 16:9 bestfit auto
setMode - port: HDMI mode: 720p rate: 50Hz

-> setting aspect, policy, wss 16:9 bestfit auto
updateColor:  HDMI

--> setting contrast to: 128

close failed in file object destructor:
IOError: [Errno 14] Bad address
--> setting saturation to: 128
close failed in file object destructor:
IOError: [Errno 14] Bad address
--> setting hue to: 128
close failed in file object destructor:

IOError: [Errno 14] Bad address
--> setting brightness to: 128
close failed in file object destructor:
IOError: [Errno 14] Bad address

--> applying psi values
close failed in file object destructor:
IOError: [Errno 5] Input/output error

[ePopen] command: ping -c1 -W2 192.168.0.101
[eConsoleAppContainer] Starting /bin/sh

[HddManager] MountOnStart

[ePopen] command: swapon /media/hdd/swapfile
[eConsoleAppContainer] Starting /bin/sh

[ShootYourScreen] start....

[SKIN] Parsing embedded skin <embedded-in-'PermanentClockScreen'>

[eEPGCache] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[eEPGCache] time updated.. start EPG Mainloop

[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>

warning, skin is missing element tunerName
 in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in
 <class 'Screens.Dish.Dish'>

RemovePopup, id = ZapError

[eEPGCache] 306212 events read from /media/hdd/epg.dat

setValue 11


[ePopen] command: ps
[eConsoleAppContainer] Starting /bin/sh

playing 1:0:19:2F45:C:70:1680000:0:0:0:

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBResourceManager] allocate channel.. 000c:0070
[eDVBFrontend] opening frontend 0

[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend] prepare_sat System 1 Freq 12072000 Pol 2 SR 27500000 INV 2 FEC 3 orbpos 360 system 1 modulation 2 pilot 2, rolloff 1, is_id -1, pls_mode 0, pls_code 1
[eDVBFrontend] tuning to 1322 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:2F45:C:70:1680000:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0

[Alternative SoftCam Manager]
/usr/bin/cam/oscam-sh4 -bc /var/keys/
[ePopen] command: /usr/bin/cam/oscam-sh4 -bc /var/keys/

[eConsoleAppContainer] Starting /bin/sh

[ePopen] command: route -n | grep  eth0
[eConsoleAppContainer] Starting /bin/sh

[ePopen] command: route -n | grep  ra0
[eConsoleAppContainer] Starting /bin/sh
[AutoMount.py] CheckMountPointFinished None None

[ePopen] command: ping -c1 -W2 192.168.0.105
[eConsoleAppContainer] Starting /bin/sh

192.168

0.0.0.0

nameservers: [[192, 168, 0, 1]]
read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1], 'address': [192, 168, 0, 100]}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'ra0': {'preup': '\tpre-up wpa_supplicant -ira0 -c/etc/wpa_supplicant.ra0.conf -B -dd -Dwext || true\n', 'predown': '\tpre-down wpa_cli -ira0 terminate || true\n', 'ip': [192, 168, 0, 100], 'up': True, 'mac': 'fc:75:16:84:3d:0c', 'dhcp': False, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
[AutoMount.py] CheckMountPointFinished None None
[eDVBFrontend] set sequence pos 3
[eDVBFrontend] set sequence pos 4
[eDVBFrontend] setVoltage 2
[eDVBFrontend] sleep 200ms

[eDVBFrontend] invalidate current switch params

[eDVBFrontend] sendDiseqc: e00000(DiSEqC reset)
[eDVBFrontend] sleep 50ms

[eDVBFrontend] sendDiseqc: e00003(DiSEqC peripherial power on)

[eDVBFrontend] sleep 150ms

[eDVBFrontend] sendDiseqc: e01039f3(?)
[eDVBFrontend] sleep 50ms

[eDVBFrontend] sendToneburst: 1

[eDVBFrontend] sleep 50ms
[eDVBFrontend] set sequence pos 3
[eDVBFrontend] setTone 1
[eDVBFrontend] sleep 10ms
[eDVBFrontend] update current switch params
[eDVBFrontend] startTuneTimeout 5000
[eDVBFrontend] setFrontend 1
[eDVBFrontend] setting frontend 0
[eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend] sleep 500ms

[eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x35c3738 running

[eDVBChannel] getDemux cap=00
[eEPGCache] channel 0x35c3738 running
[eDVBChannel] getDemux cap=00
[eEPGCache] next update in 2 sec
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=00
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0

[eDVBServicePlay] have 1 video stream(s) (0141), and 1 audio stream(s) (01a5), and the pcr pid is 0141, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01

[eTSMPEGDecoder] decoder state: play, vpid=0141, apid=01a5
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x0141 ok
[eDVBAudio] Audio Device: /dev/dvb/adapter0/audio0
[eDVBAudio] demux device: /dev/dvb/adapter0/demux0
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x01a5 ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
[eDVBAudio0] AUDIO_PLAY
ok

[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x0141 ok
[eDVBVideo0] VIDEO_PLAY
[eEPGCache] start caching events(1443688235)

[gRC] main thread is non-idle! display spinner!

ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBAudio0] AUDIO_CHANNEL_SELECT 0 ok

[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux
[eDVBTeletextParser] created teletext subtitle PES reader!

[eDVBPESReader] Created. Opening demux
[eDVBTeletextParser] starting PES reader on pid=ffffffff

[eDVBCAService] new service 1:0:19:2F45:C:70:1680000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:2F45:C:70:1680000:0:0:0:

RemovePopup, id = ZapError

[eDVBLocalTimerHandler] diff is -5
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC

[eDVBLocalTimerHandler] time update to 11:30:34
[eDVBLocalTimerHandler] m_time_difference is -5
[eDVBLocalTimerHandler] set Linux Time
[eDVBChannel] getDemux cap=00

[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 0ce5 for service_id 2f45
[Dish] tuning failed

[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0

[eDVBServicePlay] have 1 video stream(s) (0141), and 2 audio stream(s) (0191, 01a5), and the pcr pid is 0141, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=0141, apid=01a5
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBAudio0] AUDIO_CONTINUE ok

[eDVBCIInterfaces] gotPMT

[eDVBServicePMTHandler] sdt update done!

[eDVBVideo0] VIDEO_GET_EVENT unhandled DVBAPI Video Event 9

[eDVBVideo0] VIDEO_GET_EVENT unhandled DVBAPI Video Event 5

[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3

[eEPGCache] abort non avail schedule other reading

[eEPGCache] abort non avail virgin nownext reading
[eEPGCache] abort non avail virgin schedule reading

[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading

[eEPGCache] abort non avail viasat reading

[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps

[eEPGCache] nownext finished(1443688241)

[eEPGCache] schedule finished(1443688241)
[eEPGCache] stop caching events(1443688241)
[eEPGCache] next update in 60 min

action ->  InfobarShowHideActions toggleShow

action ->  OkCancelActions ok

action ->  InfobarShowHideActions toggleShow


action ->  ChannelSelectBaseActions keyLeft

action ->  ChannelSelectBaseActions keyLeft

action ->  OkCancelActions ok

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

playing 1:0:1:C:14:1:DE82A36:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:2F45:C:70:1680000:0:0:0:
[eDVBCAService] free service 1:0:19:2F45:C:70:1680000:0:0:0:

[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok

[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok
[eDVBVideo0] VIDEO_STOP
ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP
ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] destroy

[eDVBResourceManager] start release channel timer

getResolvedKey config.usage.remote_fallback failed !! (Typo??)

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

not pauseable.
[eDVBServicePlay] timeshift
[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x35c3738
[eEPGCache] remove channel 0x35c3738

[eDVBResourceManager] allocate channel.. 0014:0001

[eDVBFrontend] (0)tune
[eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
[eDVBFrontend] prepare_sat System 0 Freq 10806000 Pol 0 SR 30000000 INV 0 FEC 3 orbpos 3560 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 0, pls_code 1
[eDVBFrontend] tuning to 1056 mhz
[eDVBChannel] OURSTATE: tuning
[eDVBServicePMTHandler] allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:C:14:1:DE82A36:0:0:0:
[eDVBChannel] getDemux cap=00
[eDVBResourceManager] allocate demux cap=00
[eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0

[eDVBServicePlay] timeshift

[eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)

[eDVBFrontend] setTone 0

[eDVBFrontend] sleep 25ms

[eDVBFrontend] set sequence pos 7
[eDVBFrontend] invalidate current switch params

[eDVBFrontend] sendDiseqc: e01039f4(?)
[eDVBFrontend] sleep 50ms

[eDVBFrontend] set sequence pos 3
[eDVBFrontend] set sequence pos 3
[eDVBFrontend] update current switch params
[eDVBFrontend] startTuneTimeout 5000
[eDVBFrontend] setFrontend 1
[eDVBFrontend] setting frontend 0
[eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
[eDVBFrontend] sleep 500ms

[eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 2
[eDVBChannel] OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x360ae68 running
[eDVBChannel] getDemux cap=00
[eEPGCache] channel 0x360ae68 running
[eDVBChannel] getDemux cap=00
[eEPGCache] next update in 2 sec
[eDVBResourceManager] stop release channel timer
[eDVBChannel] getDemux cap=00
[eDVBServicePMTHandler] ok ... now we start!!
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
[eDVBServicePlay] have 1 video stream(s)
 (1201), and 1 audio stream(s) (1202), and the pcr pid is 1201, and the text pid is ffffffff
[eDVBChannel] getDemux cap=01
[eDVBResourceManager] allocate demux cap=01
[eTSMPEGDecoder] decoder state: play, vpid=1201, apid=1202
[eDVBPCR0] DMX_SET_PES_FILTER pid=0x1201 ok
[eDVBAudio] Audio Device: /dev/dvb/adapter0/audio0
[eDVBAudio] demux device: /dev/dvb/adapter0/demux0
[eDVBAudio0] DMX_SET_PES_FILTER pid=0x1202 ok
[eDVBAudio0] AUDIO_SET_BYPASS bypass=1 ok
[eDVBAudio0] AUDIO_PLAY ok
[eDVBVideo] Video Device: /dev/dvb/adapter0/video0
[eDVBVideo] demux device: /dev/dvb/adapter0/demux0
[eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
[eDVBVideo0] DMX_SET_PES_FILTER pid=0x1201
ok
[eDVBVideo0] VIDEO_PLAY
ok
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBAudio0] AUDIO_CONTINUE ok
[eDVBTeletextParser] Starting!
[eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
[eDVBPESReader] Created. Opening demux

[eDVBTeletextParser] created teletext subtitle PES reader!
[eDVBPESReader] Created. Opening demux
[eDVBTeletextParser] starting PES reader on pid=ffffffff

[eDVBCAService] new service 1:0:1:C:14:1:DE82A36:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:C:14:1:DE82A36:0:0:0:

RemovePopup, id =
ZapError

[eDVBVideo0] VIDEO_GET_EVENT unhandled DVBAPI Video Event 9

[eDVBServicePMTHandler] PATready
[eDVBServicePMTHandler] use pmtpid 1200 for service_id 000c

[eDVBLocalTimerHandler] diff is 4
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 11:31:22
[eDVBLocalTimerHandler] m_time_difference is 4
[eDVBLocalTimerHandler] set Linux Time
[eDVBChannel] getDemux cap=00
[eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0

[eDVBServicePlay] have 1 video stream(s) (1201), and 1 audio stream(s) (1202), and the pcr pid is 1201, and the text pid is ffffffff
[eTSMPEGDecoder] decoder state: play, vpid=1201, apid=1202
[eDVBVideo0] VIDEO_CONTINUE ok
[eDVBVideo0] VIDEO_SLOWMOTION 0 ok
[eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
[eDVBAudio0] AUDIO_CONTINUE ok

[eDVBCIInterfaces] gotPMT

[eDVBServicePMTHandler] sdt update done!
[Dish] tuning failed

[eEPGCache] start caching events(1443688283)

[eDVBVideo0] VIDEO_GET_EVENT unhandled DVBAPI Video Event 5

[eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3

[eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 25000 fps

[eEPGCache] abort non avail schedule reading
[eEPGCache] abort non avail schedule other reading
[eEPGCache] abort non avail virgin nownext reading
[eEPGCache] abort non avail virgin schedule reading

[eEPGCache] abort non avail netmed schedule reading
[eEPGCache] abort non avail netmed schedule other reading
[eEPGCache] abort non avail FreeSat schedule_other reading
[eEPGCache] abort non avail viasat reading

[eEPGCache] nownext finished(1443688290)

[eEPGCache] stop caching events(1443688290)
[eEPGCache] next update in 60 min

action ->  InfobarMenuActions mainMenu
loading mainmenu XML...

PluginBrowser PluginBrowser

TimerEdit
TimerEditList

illegal flag wfBorder!

action ->  OkCancelActions ok

okbuttonClick

Standby TryQuitMainloop
Standby TryQuitMainloop

SleepTimerEdit SleepTimerEdit

Standby Standby

Standby TryQuitMainloop

illegal flag wfBorder!

action ->  OkCancelActions ok

okbuttonClick

[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C:14:1:DE82A36:0:0:0:
[eDVBCAService] free service 1:0:1:C:14:1:DE82A36:0:0:0:

[eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
[eDVBPCR0] DEMUX_STOP ok
[eDVBPCR0] destroy
[eDVBVideo0] DEMUX_STOP  ok

[eDVBVideo0] VIDEO_STOP
ok
[eDVBVideo0] destroy
[eDVBAudio0] AUDIO_STOP
ok
[eDVBAudio0] DEMUX_STOP ok
[eDVBAudio0] destroy

[eDVBResourceManager] start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>

[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>

connectionLost?
[Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]

[Alternative SoftCam Manager] stopping oscam-sh4

[ePopen] command: killall -15 oscam-sh4
[eConsoleAppContainer] Starting /bin/sh

[eDVBDB] ---- saving lame channel db

[eDVBDB] saved 63 channels and 810 services!

[eDVBResourceManager] release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x360ae68
[eEPGCache] remove channel 0x360ae68
[eDVBResourceManager] stop release channel timer

[eEPGCache] store epg to realpath '/media/hdd/epg.dat'

[gRC] main thread is non-idle! display spinner!

[eEPGCache] 305815 events written to /media/hdd/epg.dat

[eDVBLocalTimeHandler] set RTC to previous valid time

[eDVBFrontend] close frontend 0

[eInit] - (41) eServiceFactoryDVD

[eInit] - (41) eServiceFactoryMP3
[eInit] - (41) eServiceFactoryHDMI
[eInit] - (41) eServiceFactoryM2TS
[eInit] - (41) eServiceFactoryFS
[eInit] - (41) eServiceFactoryDVB
[eInit] - (41) Encoders
[eInit] - (41) Stream server
[eInit] - (40) eServiceCenter
[eInit] - (35) CI Slots
[eInit] - (35) CA handler

[eInit] - (30) eActionMap
[eInit] - (22) Hdmi CEC driver
[eInit] - (21) input device driver
[eInit] - (20) DVB-CI UI
[eInit] - (20) RC Input layer
[eInit] - (20) misc options
[eInit] - (20) AVSwitch Driver
[eInit] - (15) eWindowStyleManager
[eInit] - (10) gRC
[gRC] waiting for gRC thread shutdown
[gRC] thread has finished
[eInit] - (9) GFBDC

[eInit] - (9) gLCD
[eInit] - (9) Font Render Class
[eInit] - (8) graphics acceleration manager
[eInit] - (5) Tuxtxt
[eInit] - (1) Background File Eraser
[eInit] reached rl -1

spark:~#
i
n
i
t
 
6


spark:~#
  • ET11000,самсунг NU 8000

Оффлайн 024730

  • Рыцарь Джедай
  • *****
  • Сообщений: 2197
  • Поблагодарили: 1742
  • Уважение: +15
AR-P от Taapat II версия (part-3)
« Ответ #386: 01 октября | 2015г. | 10:28:41 »
0
Вам не разрешен просмотр кода. Войдите или Зарегистрируйтесь для просмотра.увидел одну ошибочку
цвет  'transparent2' который используется в плагине ServNum его нету вообще в skin.xml у скина MetropolisHD.

Оффлайн TaapatАвтор темы

  • Мастер Джедай
  • **
  • Сообщений: 3543
  • Поблагодарили: 10700
  • Уважение: +60
AR-P от Taapat II версия (part-3)
« Ответ #387: 01 октября | 2015г. | 12:41:41 »
0
Вам не разрешен просмотр кода. Войдите или Зарегистрируйтесь для просмотра.Почему он должен быть в скине MetropolisHD? :shok:
Если автор стороннего плагина у себя в плагине использует какой то цвет по названию но не определяет его, то это ошибка плагина а не основного скина или прошивки.
  • Zgemma H7S | Zgemma H.S | Edision OS mini + | Amiko SHD-8900 Alien | VU+ Solo2 | Gi ET11000 4K
taapat.blogspot.com

Оффлайн yuriy1975h

  • Великий Джедай
  • ****
  • Сообщений: 840
  • Поблагодарили: 2632
  • Уважение: -3
AR-P от Taapat II версия (part-3)
« Ответ #388: 01 октября | 2015г. | 13:03:10 »
0
2 часа ни одного спинера что значит удалить лишнее,Taapat,а больше ошибок не было в логе кроме как с плагином ServNum?
  • ET11000,самсунг NU 8000

Оффлайн TaapatАвтор темы

  • Мастер Джедай
  • **
  • Сообщений: 3543
  • Поблагодарили: 10700
  • Уважение: +60
AR-P от Taapat II версия (part-3)
« Ответ #389: 01 октября | 2015г. | 13:03:52 »
0
yuriy1975h, перед тем как снимать лог сделайте в телнете:
Вам не разрешен просмотр кода. Войдите или Зарегистрируйтесь для просмотра.Тогда в логе будет видно время.
И лог надо снимать так, чтобы в нём было видно проблемы с закачкой епг. По логу старта еныгми можно заниматься только гаданием.
  • Zgemma H7S | Zgemma H.S | Edision OS mini + | Amiko SHD-8900 Alien | VU+ Solo2 | Gi ET11000 4K
taapat.blogspot.com

Теги:
 

Похожие темы

  Тема / Автор Ответов Последний ответ
230 Ответов
127165 Просмотров
Последний ответ 01 июня | 2012г. | 12:53:20
от roman_ispu
1485 Ответов
570578 Просмотров
Последний ответ 05 января | 2015г. | 13:45:31
от Ser6
93 Ответов
59711 Просмотров
Последний ответ 13 июля | 2023г. | 07:54:06
от aytbay
1358 Ответов
594479 Просмотров
Последний ответ 15 февраля | 2015г. | 01:43:13
от Taapat
1500 Ответов
578546 Просмотров
Последний ответ 08 августа | 2015г. | 22:24:22
от Taapat



X

Добро пожаловать!

Мы заметили, что у Вас установлено расширение AdBlock или ему подобное. Пожалуйста добавьте наш Клуб в белый список, внесите этим посильную лепту в его развитие. Спасибо!