Ё §чяяя
Board: STx7111-Mboard (MB618) [32-bit mode]
info: Disregarding any EPLD
U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel
DRAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID : 09 00 07 00 00 b7 ac
Hit ESC to stop autoboot: 5 4 3 2 1 0
Loading from NAND 512MiB 3,3V 8-bit, offset 0x18000000
Image Name: Linux-2.6.32.57_stm24_0210
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2699474 Bytes = 2.6 MiB
Load Address: 80801000
Entry Point: 80802000
## Booting image at 80000000 ...
Image Name: Linux-2.6.32.57_stm24_0210
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 2699474 Bytes = 2.6 MiB
Load Address: 80801000
Entry Point: 80802000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
found phy at addres = 1
stmac_phy_get_addr(): id1 = 0x7, id2 = 0xc0f1
stb_id = 90700b7ac
Starting kernel console=ttyAS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:LINUX7109:eth0:off bigphysarea=6000 stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:07:00:B7:AC Manufacture=Spark-Project STB_ID=09:00:07:00:00:B7:AC - 0x00000000 - 0 ...
Linux version 2.6.32.57_stm24_0210 (pinky@asuslappy) (gcc version 4.5.2 20110124 (STMicroelectronics/Linux Base 4.5.2-78) (GCC) ) #1 PREEMPT Mon Apr 30 20:01:27 CEST 2012
Boot params:
... MOUNT_ROOT_RDONLY - 00000001
... RAMDISK_FLAGS - 00000000
... ORIG_ROOT_DEV - 00000200
... LOADER_TYPE - 00000000
... INITRD_START - 00000000
... INITRD_SIZE - 00000000
Booting machvec: sat7111
Node 0: start_pfn = 0x40000, low = 0x50000
Zone PFN ranges:
Normal 0x00040000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00040000 -> 0x00050000
Spark-7111 board initialization
STx7111 version 3.x
bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock6 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:LINUX7109:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:07:00:B7:AC Manufacture=Spark-Project STB_ID=09:00:07:00:00:B7:AC
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
PVR=04909200 CVR=60880000 PRR=00009a10
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 115840k/262144k available (3214k kernel code, 1295k data, 120k init)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:600
Failed to enable clk CLKA_REF, ignoring
Failed to enable clk CLKA_PLL0LS, ignoring
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 448.51 BogoMIPS (lpj=897024)
Mount-cache hash table entries: 512
CPU: STx7111
[STM][PM-Sys]: ilc3 @ 4096
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
[STM]: [PM]: Suspend support registered
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/W].
JFFS2 version 2.2. (NAND) (SUMMARY) В© 2001-2006 Red Hat, Inc.
fuse init (API version 7.13)
JFS: nTxBlock = 905, nTxLock = 7242
msgmni has been set to 226
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
lirc_dev: IR Remote Control driver registered, major 61
lirc-stm: probe found data for platform device lirc-stm
lirc-stm: STM LIRC plugin using IRQ 125 in IR mode
lirc_dev: lirc_register_driver: sample_rate: 0
STMicroelectronics LIRC driver initialized.
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0xfd033000 (irq = 120) is a stm-asc
brd: module loaded
loop: module loaded
physmap platform flash device: 00800000 at 00000000
physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Using physmap partition information
Creating 3 MTD partitions on "physmap-flash":
0x000000000000-0x000000080000 : "Boot firmware"
0x000000080000-0x000000780000 : "Kernel"
0x000000780000-0x000000800000 : "Reserve"
stm-nand-emi: Configuring EMI Bank 1 for NAND access
ONFI flash detected
NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
Creating 4 MTD partitions on "stm-nand-emi.0":
0x000000000000-0x000000800000 : "Spark Kernel"
0x000000800000-0x000018000000 : "Spark Rootfs"
0x000018000000-0x000018800000 : "E2 Kernel"
0x000018800000-0x00001ff00000 : "E2 RootFs"
stmmac - user ID: 0x10, Synopsys ID: 0x33
No HW DMA feature register supported
Enhanced/Alternate descriptors
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
nwhw_config: (eth0) setting mac address: 24:00:07:00:b7:ac
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm-ehci stm-ehci.0: st-ehci
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: stm-ohci
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Linux video capture interface: v2.00
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
[STM][PM-Sys]: emi @ 40
[STM][PM-Sys]: gpio @ 20
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf000000 size 0x00400000
cop. addr 0x40000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf400000 size 0x00400000
cop. addr 0x40400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac.0 handler (16 channels).
IRQ 140/fdma_dmac.0: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.0: firmware: using built-in firmware fdma_STx7111_0.elf
platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 2.1
DMA: Registering fdma_dmac.1 handler (16 channels).
IRQ 141/fdma_dmac.1: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elf
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.5
stm-rng hardware driver 1.0 configured
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
eth0: device MAC address 24:00:07:00:b7:ac
STMMAC MII Bus: probed
eth0: PHY ID 00000000 at 0 IRQ 0 (0:00)
eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
eth0: PHY ID 00000000 at 2 IRQ 0 (0:02)
eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
eth0: PHY ID 00000000 at 6 IRQ 0 (0:06)
eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)
eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)
eth0: PHY ID 00000000 at 11 IRQ 0 (0:0b)
eth0: PHY ID 00000000 at 12 IRQ 0 (0:0c)
eth0: PHY ID 00000000 at 13 IRQ 0 (0:0d)
eth0: PHY ID 00000000 at 14 IRQ 0 (0:0e)
eth0: PHY ID 00000000 at 15 IRQ 0 (0:0f)
eth0: PHY ID 00000000 at 16 IRQ 0 (0:10)
eth0: PHY ID 00000000 at 17 IRQ 0 (0:11)
eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)
eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
eth0: PHY ID 00000000 at 22 IRQ 0 (0:16)
eth0: PHY ID 00000000 at 23 IRQ 0 (0:17)
eth0: PHY ID 00000000 at 24 IRQ 0 (0:18)
eth0: PHY ID 00000000 at 25 IRQ 0 (0:19)
eth0: PHY ID 00000000 at 26 IRQ 0 (0:1a)
eth0: PHY ID 00000000 at 27 IRQ 0 (0:1b)
eth0: PHY ID 00000000 at 28 IRQ 0 (0:1c)
eth0: PHY ID 00000000 at 29 IRQ 0 (0:1d)
eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
No MAC Management Counters available
IP-Config: Unable to set interface netmask (-22).
UDF-fs: No partition found (1)
yaffs: dev is 32505862 name is "mtdblock6" rw
yaffs: passed flags ""
VFS: Mounted root (yaffs filesystem) on device 31:6.
Freeing unused kernel memory: 120k freed
INIT: version 2.86 booting
init frontpanel
Fulan front panel driver
CpuType = 2
DisplayInfo = 4
scankeyNum = 8
swMajorVersion = 1
swSubVersion = 10
input: fulan front panel buttons as /devices/virtual/input/input0
[simu_button] initializing ...
[simu_button] allocating and registering button device
input: TDT RC event driver as /devices/virtual/input/input1
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: EvoLux.
init stmfb
cat: can't open '/usr/local/share/config/neutrino.conf': No such file or directory
stmcore-display: using HDMI hotplug
stmcore-display: STi7111 display probed
device probe found 2 display pipelines
requesting frm: 'component.fw', c11a62c4/87609710
stm-awg: firmware: requesting component.fw
frm 'component.fw' successfully loaded
requesting frm: 'fdvo0.fw', c11a62c4/87609a10
stm-awg: firmware: requesting fdvo0.fw
loading frm: 'fdvo0.fw' failed: -2
stmfb: fb0 parameters = "1920x1080-32@50:8m:pal:yuv:yuv"
stmfb: fb1 parameters = "<NULL>"
LOADING MODULES
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 400
seeking to 5c18
seeking to b058
seeking to ff08
seeking to 136f0
seeking to 15008
seeking to 15018
seeking to 3bcc0
seeking to 3dfb8
seeking to 46558
seeking to 48a58
seeking to 71e68
seeking to 75fe8
seeking to 77878
seeking to 77c88
seeking to 90ef0
seeking to a16c0
seeking to 139f28
seeking to 139ff0
seeking to 13b6b0
seeking to 13ed70
seeking to 1427b0
seeking to 145408
seeking to 14b3c8
seeking to 159f58
seeking to 177b78
seeking to 17a378
seeking to 184460
seeking to 18c9a8
seeking to 221208
seeking to 26e400
seeking to 26e438
seeking to 26e470
seeking to 275820
seeking to 275828
seeking to 275830
seeking to 275840
seeking to 2955c0
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 57a40
seeking to 120378
seeking to 1203b0
seeking to 1203e8
seeking to 12f230
seeking to 12f23c
seeking to 12f248
seeking to 1510c0
seeking to 14f0ac
seeking to 151100
init embx
init AVS
init player player191
Init of MME log wrapper
stm_v4l2_register_driver: driver 'stmvout' registered
stm_v4l2_register_driver: driver 'stmvbi' registered
snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
pseudocard: 1 pseudo soundcard(s) found
stv090x loaded
pti: module license 'NO' taints kernel.
Disabling lock debugging due to kernel taint
pti loaded (videoMem = 4096, waitMS = 20, enableStatistic = 0)
no swts ->routing streams from dvr0 direct to the player
DVB: registering new adapter (STM Streamer)
0: DeviceContext 875a4088, DvbDemux 875a438c, DmxDevice 875a4574
CaInit()
Initializing CI Controller
ptiInit context = 875a4088, demux = 875a438c
[Spark] Init Stream Routing...
Load real TC Code
TC_Data = fe238000, TC_Code = fe23c000
Readback TC ... successfull
using videoMem = 770048 (packets = 4096)
pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes)
DMA(0) base = 48c80000, top = 48d3c000, buffer = 48c80000, size 770048
pti_buffer_pool_init: put in pool dmaIndex 0
freeBuffer(): free = 1
stv090x_register_frontend: stv090x DVB: 0.11
pti_task: using 1 dma channel
tuner = 1
stv090x_register_frontend: init tuner 0
> (bus = 3) init_stv090x_device
i2c adapter = 0x87e88218
i2c addr = 68
tuner enable = 0.0
frontend_init >
frontend_init: attached
ix7306_attach: Attaching Sharp BS2S7HZ7306A IX7306 8PSK/QPSK tuner
frontend_init: IX7306 attached
init_stv090x_device: Call dvb_register_frontend (adapter = 0x875a403c)
DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
stv090x_register_frontend: <
Free session: 0
Using session 0
Descrambler Handler = 40000
1: DeviceContext 875a4610, DvbDemux 875a4914, DmxDevice 875a4afc
CaInit()
ptiInit context = 875a4610, demux = 875a4914
Free session: 1
Using session 1
Descrambler Handler = 41000
2: DeviceContext 875a4b98, DvbDemux 875a4e9c, DmxDevice 875a5084
ptiInit context = 875a4b98, demux = 875a4e9c
convert_source(): invalid frontend source (2)
Free session: 2
Using session 2
Descrambler Handler = 42000
3: DeviceContext 875a5120, DvbDemux 875a5424, DmxDevice 875a560c
stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
Player:DisplayInit: Pipeline 0 Device c11a6e8c, Name = STi7111-main, Preferred video plane = 2
Player:DisplayInit: Pipeline 1 Device c11a6e8c, Name = STi7111-aux, Preferred video plane = 4
SetPolicy - 00000000 00000000 PolicyPlayoutAlwaysPlayout 0
SetPolicy - 00000000 00000000 PolicyPlayoutAlwaysDiscard 1
SetPolicy - 00000000 00000000 PolicyMasterClock 0
SetPolicy - 00000000 00000000 PolicyManifestFirstFrameEarly 1
SetPolicy - 00000000 00000000 PolicyExternalTimeMapping 0
SetPolicy - 00000000 00000000 PolicyExternalTimeMappingVsyncLocked 0
SetPolicy - 00000000 00000000 PolicyAVDSynchronization 1
SetPolicy - 00000000 00000000 PolicyClampPlaybackIntervalOnPlaybackDirectionChange 1
SetPolicy - 00000000 00000000 PolicyTrickModeDomain 0
SetPolicy - 00000000 00000000 PolicyStatisticsOnAudio 0
SetPolicy - 00000000 00000000 PolicyStatisticsOnVideo 0
SetPolicy - 00000000 00000000 PolicyDiscardLateFrames 2
SetPolicy - 00000000 00000000 PolicyVideoStartImmediate 1
SetPolicy - 00000000 00000000 PolicySyncStartImmediate 0
SetPolicy - 00000000 00000000 PolicyRebaseOnFailureToDeliverDataInTime 1
SetPolicy - 00000000 00000000 PolicyRebaseOnFailureToDecodeInTime 1
SetPolicy - 00000000 00000000 PolicyH264AllowNonIDRResynchronization 1
SetPolicy - 00000000 00000000 PolicyH264AllowBadPreProcessedFrames 1
SetPolicy - 00000000 00000000 PolicyH264TreatDuplicateDpbValuesAsNonReferenceFrameFirst 1
SetPolicy - 00000000 00000000 PolicyH264ForcePicOrderCntIgnoreDpbDisplayFrameOrdering 0
SetPolicy - 00000000 00000000 PolicyH264TreatTopBottomPictureStructAsInterlaced 1
SetPolicy - 00000000 00000000 PolicyMPEG2ApplicationType 2
SetPolicy - 00000000 00000000 PolicyMPEG2DoNotHonourProgressiveFrameFlag 0
SetPolicy - 00000000 00000000 PolicyClockPullingLimit2ToTheNPartsPerMillion 8
SetPolicy - 00000000 00000000 PolicyLimitInputInjectAhead 0
SetPolicy - 00000000 00000000 PolicyDecimateDecoderOutput 0
SetPolicy - 00000000 00000000 PolicySymmetricJumpDetection 0
SetPolicy - 00000000 00000000 PolicyPtsForwardJumpDetectionThreshold 4
SetPolicy - 00000000 00000000 PolicyPixelAspectRatioCorrection 100
SetPolicy - 00000000 00000000 PolicyAllowFrameDiscardAtNormalSpeed 0
SetPolicy - 00000000 00000000 PolicyOperateCollator2InReversibleMode 0
SetPolicy - 00000000 00000000 PolicyVideoOutputWindowResizeSteps 1
SetPolicy - 00000000 00000000 PolicyIgnoreStreamUnPlayableCalls 0
SetPolicy - 00000000 00000000 PolicyUsePTSDeducedDefaultFrameRates 1
SetPolicy - 00000000 00000000 PolicyDiscardLateFrames 0
SetPolicy - 00000000 00000000 PolicyVideoStartImmediate 1
SetPolicy - 00000000 00000000 PolicyMPEG2DoNotHonourProgressiveFrameFlag 1
Player:Mixer0AudioFactory: Performing JIT mixer0 (main room) instanciation.
OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
AllocatorLoadModule : Allocator device loaded
OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
H264ppLoadModule : H264pp device loaded
Registering device 'sc', major '169'
Version of smartcard driver: [1.0.1]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
Loading autofs
Starting autofs
VFD startup stateproc_fp_was_timer_wakeup_write 2
is electrify
0
Reconfiguring network interfaces... eth0: device MAC address 24:00:07:00:b7:ac
STMMAC MII Bus: probed
eth0: PHY ID 00000000 at 0 IRQ 0 (0:00)
eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
eth0: PHY ID 00000000 at 2 IRQ 0 (0:02)
eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
eth0: PHY ID 00000000 at 6 IRQ 0 (0:06)
eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)
eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)
eth0: PHY ID 00000000 at 11 IRQ 0 (0:0b)
eth0: PHY ID 00000000 at 12 IRQ 0 (0:0c)
eth0: PHY ID 00000000 at 13 IRQ 0 (0:0d)
eth0: PHY ID 00000000 at 14 IRQ 0 (0:0e)
eth0: PHY ID 00000000 at 15 IRQ 0 (0:0f)
eth0: PHY ID 00000000 at 16 IRQ 0 (0:10)
eth0: PHY ID 00000000 at 17 IRQ 0 (0:11)
eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)
eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
eth0: PHY ID 00000000 at 22 IRQ 0 (0:16)
eth0: PHY ID 00000000 at 23 IRQ 0 (0:17)
eth0: PHY ID 00000000 at 24 IRQ 0 (0:18)
eth0: PHY ID 00000000 at 25 IRQ 0 (0:19)
eth0: PHY ID 00000000 at 26 IRQ 0 (0:1a)
eth0: PHY ID 00000000 at 27 IRQ 0 (0:1b)
eth0: PHY ID 00000000 at 28 IRQ 0 (0:1c)
eth0: PHY ID 00000000 at 29 IRQ 0 (0:1d)
eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
No MAC Management Counters available
udhcpc (v1.19.4) started
Sending discover...
Sending discover...
Sending discover...
failed...
No lease, failing
done.
init lircd
/bin/fp_control: SW Version 1.02
Model: spark
vBoxType: 1
Selected Model: Edision Spark frontpanel control utility
lircd-0.9.0[995]: lircd(default) ready, using /var/run/lirc/lircd
lircd-0.9.0[995]: accepted new client on /var/run/lirc/lircd
Model: spark
vBoxType: 10
cat: can't open '/usr/local/share/config/neutrino.conf': No such file or directory
Input device name: "fulan front panel buttons"
Input device name: "TDT RC event driver"
Selected Remote: Spark RemoteControl
Supports Long KeyPress: 1
processComplex >
Using period=5 delay=200
lircd-0.9.0[995]: accepted new client on /var/run/lirc/lircd
[SEM] DOWN
LOADING neutrino
starting neutrino ->
[neutrino] frameBuffer Instance created
8192k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[ConfigFile] Unable to open file /usr/local/share/config/neutrino.conf for reading.
Setting timezone to: (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Vienna
Timezone: (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Vienna -> CET
exec cp /usr/share/zoneinfo/CET /etc/localtime
cannot read locale: No such file or directory
[english.locale] superfluous entry: lcdmenu.dim_brightness
[english.locale] dup entry: messagebox.yes
[english.locale] superfluous entry: dvb.subtitle.placement
[english.locale] superfluous entry: dvb.subtitle.placement.bottom
[english.locale] superfluous entry: dvb.subtitle.placement.top
[english.locale] missing entry: messagebox.accept
[english.locale] missing entry: moviebrowser.edit_book_pos_info2
[english.locale] missing entry: movieplayer.bookmarkname_hint2
[neutrino] settings font file /usr/local/share/fonts/neutrino.ttf
[neutrino] font family Micron
src_off = 0x0 src_pitch = 0x60
dst_off = 0x0 dst_pitch = 0x1e00
[zapit] starting... tiSetSource(875a438c, 0)
pti_hal_set_source(): 0, 34
d 106SetSource(875a438c, 0)
pti_hal_set_source(): 0, 34
3
dmxproc_video_videomode_write 6 - 720p50
Found mode to set 720p50 at 21
_cs.cpp:cDemux - num=0
dmx_cs.cpp:cDemux - num=0
dmx_cs.cpp:Open - pes_type=DMX_VIDEO_CHANNEL hVideoBuffer= uBufferSize=65536
dmx_cs.cpp:getBuffer (type=DMX_VIDEO_CHANNEL)
dmx_cs.cpp:Open - pes_type=DMX_PCR_ONLY_CHANNEL hVideoBuffer= uBufferSize=65536
dmx_cs.cpp:getChannel (type=DMX_VIDEO_CHANNEL)
dmx_cs.cpp:getBuffer (type=DMX_VIDEO_CHANNEL)
video_cs.cpp:cVideo
video_cs.cpp:Open
video_cs.cpp:SetVideoSystem - video_system=VIDEO_STD_720P50 remember=true
video_system=VIDEO_STD_720P50
dmx_cs.cpp:cDemux SetSource(875a438c, 0)
pti_hal_set_source(): 0, 34
- num=0
dmx_cs.cpp:Open - pes_type=DMX_AUDIO_CHANNEL hVideoBuffer= uBufferSize=65536
dmx_cs.cpp:getBuffer (type=DMX_AUDIO_CHANNEL)
video_cs.cpp:GetTVEnc
video_cs.cpp:GetTVEncSD
audio_cs.cpp:cAudio
audio_cs.cpp:Open
audio_cs.cpp:GetHandle
video_cs.cpp:SetAudioHandle - handle=0x00000000
dvb-ci.cpp:getInstance
dvb-ci.cpp:cDvbCi 2
failed to open /dev/dvb/adapter0/ci0 ->No such file or directoryIOCTL CA_RESET failed for slot 0
failed to open /dev/dvb/adapter0/ci1 ->No such file or directoryIOCTL CA_RESET failed for slot 1
dvb-ci.cpp:Init
[fe0] New frontend
[fe0] open frontend
[fe0] open /dev/dvb/adapter0/frontend0
[fe0] frontend fd 12 type 0
[fe0] voltage 13 high 0
[fe0] FE_SET_VOLTAGE took: 15 msec (min 15 max 15)
[fe0] tone off
[fe0] FE_SET_TONE took: 19 msec (min 19 max 19)
[fe0] diseqc power on
[fe0] Diseqc cmd: 0xE0 0x10 0x3
[ConfigFile] Unable to open file /usr/local/share/config/zapit/zapit.conf for reading.
[zapit.cpp:loadZapitSettings:317] /usr/local/share/config/zapit/zapit.conf not found
[frontend.cpp:setDiseqcType:868] NO_DISEQC
[zapit.cpp] diseqc type = 0
[zapit] Loading services, channel size 148 ..
no valid fec for DVB-S2 set.. !!
/usr/local/share/config/zapit/services.xml: Nproc_avs_0_volume_write 1 - 0
oproc_hdmi_audio_source_write 3 - pcm
stmhdmiio_set_audio_source - 87640000
Find spdif_bypass control at 87660180
proc_stream_AV_SYNC_write 5 - apply
failed to set policy
proc_stream_MASTER_CLOCK_write 5 - video
failed to set policy
suproc_audio_ac3_write 8 - downmix
ch file or directory
[getservices] loading motor positions...
[getservices] /usr/local/share/config/zapit/sERROR:LinuxDvb:DvbDisplayDelete: Failed to close video surface
ERROR:LinuxDvb:DvbDisplayDelete: Failed to close audio surface
at.conf not found.
[zapit] 0 services loaded (0)...
[zapit] service loading took: 44 msec
satelliteName = Amos 2/3 (4.0W) (15), satellitePosition = -40 motor position = 0 usals 0
satelliteName = Astra 1E/4A (4.8E) (18), satellitePos
INIT: Sending processes the TERM signal
lircd-0.9.0[995]: removed Sending all processes the TERM signal...lircd-0.9.0[995]: caught signal
done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting... Res
Board: STx7111-Mboard (MB618) [32-bit mode]
info: Disregarding any EPLD
U-Boot 1.3.1-g057e7c28 (Oct 21 2011 - 09:58:11) - stm23_0043 - YW 1.0.021 Rel
DRAM: 128 MiB
NOR: 8 MiB
NAND: 512 MiB
In: serial
Out: serial
Err: serial
IdentID : 09 00 07 00 00 b7 ac
Hit ESC to stop autoboot: 5 4 3 2
04 августа | 2011г. | 14:46:57
Мобильная версия 
