аь
BCM97401
AB
FFFFFFFF
1s
K1
K2
K3
K4
K5
00000006 00000011 00000016 0000003A 0000000E 00000025 0000000E 00000011 0000000E
0000003B 00000026 00000006 00000026 00000016 00000026 0000000E 00000010 0000002
A 2
Copy Code...34TUCV
lzma 0x0003D302 -> 0x00100000
V
romStart
_pthread once
pthread once ok
_ftext=80800000 _fdata=8089b8c0 _fbss=808aa360 _end=808f8820
MIPS Exception
*************************************************************
STATUS=00000000 BEV=0 IMask=0 IEnable=0
CAUSE=00000000 ExcCode=0 BADVADDR=04000000
-------------------------------------------------------------
$0=00000004 00000000 00000010 00200000
$4=00000000 00020000 02000c00 00100000
$8=00000010 02000000 00000014 00000000
$12=00000001 00000000 00100800 00000000
$16=00004010 00000000 00000000 00000001
$20=08200c00 00000000 00000440 00000000
$24=00000004 00300000 20004000 00000010
$28=000108c0 00000000 20800804 00000000
-------------------------------------------------------------
EPC=0x00100800 ErrPC=0x00000000
-------------------------------------------------------------
test : 00000000
floating point CP1 FCR0 : 00000000
floating point CP1 FCR31 : 00000000
os tsk init 3000ff01
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
1
cpu cause 800000
cpu status 3000ff01
cpu int mask 3f
cpu config 80000083
cpu bcm config e3800000
create heap
bsettop_init
b_convert_priority 10 7
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create bcm 7 830002b0 - 830042ac
b_convert_priority 30 55
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create bcm 55 83008338 - 8300a334
Before zw_init_i2c_hw
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_11 0x554a4930
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_12 0x00001555
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_10 0x0a249209
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_10_gpio_41 0x0a241209
Before zw_init_common_interface
BCHP_EBI_CS_BASE_0 0x1c00000d
BCHP_EBI_CS_CONFIG_0 0x07000411
BCHP_EBI_CS_BASE_1 0x00000000
BCHP_EBI_CS_CONFIG_1 0x07000000
BCHP_EBI_CS_BASE_2 0x00000000
BCHP_EBI_CS_CONFIG_2 0x07000000
BCHP_EBI_CS_BASE_3 0x00000000
BCHP_EBI_CS_CONFIG_3 0x07000000
zw_init_common_interface OK in ../../../../../../../BSEAV/api/src/magnum/board/b
settop_bsp_7401.c at line 1067
BCHP_EBI_CS_BASE_0 0x1e00000b
BCHP_EBI_CS_CONFIG_0 0x07000411
BCHP_EBI_CS_BASE_1 0x00000000
BCHP_EBI_CS_CONFIG_1 0x07000000
BCHP_EBI_CS_BASE_2 0x1f000005
BCHP_EBI_CS_CONFIG_2 0x471080a1
BCHP_EBI_CS_BASE_3 0x00000000
BCHP_EBI_CS_CONFIG_3 0x07000000
BCHP_EBI_ECR 0x00000400
BCHP_EBI_BURST_CFG 0x00008000
BCHP_EBI_CS_TRISTATE_CFG 0x00000000
BCHP_EBI_TA_CFG 0x0000000e
BCHP_SUN_TOP_CTRL_STRAP_VALUE 0x44a14502
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_9 0x2384b8db
BCHP_SUN_TOP_CTRL_PIN_MUX_CTRL_11 0x55631130
create q 830119a0 64 20 830119e0 830119a4
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create ucosIntTask 2 83012020 - 8301601c
pin mux: 4040bc = a241209
pin mux: 4040c0 = 55631120
DDR PLL: 106818 = 126
gpio dir: 400728 = fffffdff
gpio val: 400724 = 22c00
hw ver 000
hardware version 0
boot time till here 0
create q 8302b7d8 256 8 8302b818 8302b7dc
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create 7401Demux 37 8302c458 - 8302e454
input init
mux: 4040b0 = 92492d9
400708 = ffffefff
400704 = 400e1c5
Found TDA10046 at i2c address 0x8
[Mode A]
[Serial Mode !]
starting download DSP microcode
download DSP code finish(0xb0) ...
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create ZW_FP 56 830344e0 - 830364dc
flash size = 8192KB 23
FFS: Config:
sectsize = 2048
FS Blocks = 5
FS Start Block = 63
blockNSectorTab
= 31, block_size[i + ffsCfg->start_block]= 65536
blockNSectorTab = 31, block_size[i + ffsCfg->start_block]= 65536
blockNSectorTab = 31, block_size[i + ffsCfg->start_block]= 65536
blockNSectorTab = 31, block_size[i + ffsCfg->start_block]= 65536
blockNSectorTab = 31, block_size[i + ffsCfg->start_block]= 65536
totalSectors = 155
maxFileSectors = 124
fileHeaderSize = 143
FFS: Found valid fat in block 4
create q 8303c500 4096 32 8303c540 8303c504
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create ffs 57 83060580 - 830605fc
create q 830685a0 128 24 830685e0 830685a4
-------- 1 ---------
os tsk init 3000ff01
-------- 2 ---------
zw_os_tsk_create app 48 83069420 - 8306d41c
loader base init success
<SSU> SSU Entry!!
Starting DVB-T SSU Loader version 0.10
Copyright ?2006 Zinwell Corp.
FFS Task: got msg: 3
FFS Open msg: open 'LOADER'
find file LOADER 80895c04
find file compare 7 LOADER LOADER 80895c04
FFS Open msg: file sector found = 7
FFS Open: File found at 7
FFS Open: size = 113, usize = 128, next = 07, stat = EC, comp = 1
find file LOADER 8307144c
find file compare 7 LOADER LOADER 8307144c
FFS ReadFile: start 7, size 113, total 113
FFS ReadFile: done read 4 128
FFS ReadFile: zlib decompress 113 to 128
FFS ReadFile: zlib uncompress done = 0, 128
FFS Open: Wait for sem
FFS Task: got msg: 2
FFS Task: got msg: 4
FFS Close msg: dirty = 0 fh->buf = 830715D0
FFS Task: got msg: 3
FFS Open msg: open 'LOADER'
find file LOADER 80895c04
find file compare 7 LOADER LOADER 80895c04
FFS Open msg: file sector found = 7
FFS Open: File found at 7
FFS Open: size = 113, usize = 128, next = 07, stat = EC, comp = 1
find file LOADER 8307144c
find file compare 7 LOADER LOADER 8307144c
FFS ReadFile: start 7, size 113, total 113
FFS ReadFile: done read 4 128
FFS ReadFile: zlib decompress 113 to 128
FFS ReadFile: zlib uncompress done = 0, 128
FFS Open: Wait for sem
FFS Task: got msg: 1
FFS Wr msg: Old wrote 128 bytes (total now 128)
FFS Task: got msg: 4
FFS Close msg: dirty = 1 fh->buf = 830715D0
FFS Close msg: file to be written
FFS Close: zlib(0) compressed from 128 to 113
FFS Close msg: write new file
FFS Find free sector: total = 155
FFS WriteFile: found start sector 8, sectors needed 1
FFS Find free chain: total = 155 needed = 1
FFS WriteFile: sector chain 8,
FFS WriteFile: first sector 8 written size = 113
FFS Close: mark old file entry 7 invalid
FFS Task: got msg: 3
FFS Open msg: open 'BOXINFO'
find file BOXINFO 80895c38
find file compare 8 BOXINFO LOADER 80895c38
find file compare 129 BOXINFO SCANTP 80895c38
find file compare 130 BOXINFO FAVLIST 80895c38
find file compare 131 BOXINFO BOXINFO 80895c38
FFS Open msg: file sector found = 131
FFS Open: File found at 131
FFS Open: size = 38, usize = 36, next = 83, stat = EC, comp = 1
find file BOXINFO 8307144c
find file compare 8 BOXINFO LOADER 8307144c
find file compare 129 BOXINFO SCANTP 8307144c
find file compare 130 BOXINFO FAVLIST 8307144c
find file compare 131 BOXINFO BOXINFO 8307144c
FFS ReadFile: start 131, size 38, total 38
FFS ReadFile: done read 4 36
FFS ReadFile: zlib decompress 38 to 36
FFS ReadFile: zlib uncompress done = 0, 36
FFS Open: Wait for sem
FFS Task: got msg: 2
FFS Task: got msg: 4
FFS Close msg: dirty = 0 fh->buf = 83071580
stBoxInfo:
uiOUI 0x59E
wHwModel 0x1
wHwVersion 0x1
wSwModel 0x1
wSwVersion 0x100
uiStarterImageSize 239844
abStarterMD5Digest:
0x67
0x87
0xF6
0x35
0xC1
0x1b
0xd0
0xC0
0x72
0xd7
0x61
0xFd
0x89
0xbF
0x3E
0xF1
ENTER STARTER_Main
DOWNLOAD_IntegrityCheck CHECK_APP_IMAGEMD5 check
MD5 check [1]=> [0xc7], [0xc7]
MD5 check [2]=> [0x87], [0x87]
MD5 check [3]=> [0x70], [0x70]
MD5 check [4]=> [0x8a], [0x8a]
MD5 check [5]=> [0x9d], [0x9d]
MD5 check [6]=> [0x4f], [0x4f]
MD5 check [7]=> [0x72], [0x72]
MD5 check [8]=> [0xac], [0xac]
MD5 check [9]=> [0x66], [0x66]
MD5 check [10]=> [0xeb], [0xeb]
MD5 check [11]=> [0x1], [0x1]
MD5 check [12]=> [0xad], [0xad]
MD5 check [13]=> [0x36], [0x36]
MD5 check [14]=> [0x1e], [0x1e]
MD5 check [15]=> [0xbc], [0xbc]
OK
DOWNLOAD_IntegrityCheck CHECK_KERNEL_IMAGE
MD5 check
MD5 check [1]=> [0xff], [0xff]
MD5 check [2]=> [0x33], [0x33]
MD5 check [3]=> [0x53], [0x53]
MD5 check [4]=> [0xd6], [0xd6]
MD5 check [5]=> [0x71], [0x71]
MD5 check [6]=> [0x8b], [0x8b]
MD5 check [7]=> [0x47], [0x47]
MD5 check [8]=> [0xfb], [0xfb]
MD5 check [9]=> [0xf4], [0xf4]
MD5 check [10]=> [0x5f], [0x5f]
MD5 check [11]=> [0x34], [0x34]
MD5 check [12]=> [0x64], [0x64]
MD5 check [13]=> [0x0], [0x0]
MD5 check [14]=> [0x7c], [0x7c]
MD5 check [15]=> [0xb1], [0xb1]
OKDOWNLOAD_GetUpdateFlag() : bUpdateFlag = 0
[BTM] CFE Boot 0
Common Firmware Environment (CFE) version 1.2 for BCM97401C1, (Little Endian Mod
e)
Build Date: Wed Jan 16 08:41:10 2008 (yhchen@yhchen)
Copyright (C) 2000-2007 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
blocks 0 8 8192
blocks 1 127 65536
CPU speed: 297MHz
Total memory: 0x8000000 bytes (128MB)
Total memory used by CFE: 0x80800000 - 0x808F8820 (1017888)
Initialized Data: 0x8089B8C0 - 0x808AA360 (60064)
BSS Area: 0x808AA360 - 0x808F8820 (320704)
Local Heap: 0x808F88A0 - 0x809F88A0 (1048576)
Stack Area: 0x809F88A0 - 0x809FA8A0 (8192)
Text (code) segment: 0x80800000 - 0x80826E30 (159280)
[BTM] CFE Init 0
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:root=/dev/mtdblock0 rootf
stype=squashfs
Loading: 0x802e6086/130970 Entry address is 0x802c2000
total= bytes
[BTM] Load 0
Starting program at 0x802c2000
RUN!
<5>Linux version 2.6.12-4.2-brcmstb build version 2612-4.2 (root@localhost.local
domain) (gcc version 3.4.2) #78 Fri Jan 25 17:01:13 CST 2008
c->processor_id == 00020000
MIPs 7401 id = 20000
Before: firmhandl=808b2300, firmentry=80802bfc, seal=43464531,bootParmsAddr=802e
75a8
The cmdline args were:
@802e75a8=root=/dev/mtdblock0 rootfstype=squashfs
Done initializing UARTC at b0400b00
HI WORLD!!!
gathering mode: 0x00000264 at 0x0xb000040c
split mode: 0x00000001 at 0xb0000410
board_init_once: regval=44a14502, ddr_strap=2, 4 chips, pci_size=2
Detected 128 MB on board
cfeBootParms ===> root=/dev/mtdblock0 rootfstype=squashfs
Number of Nand Chips = 0
Kernel boot options: root=/dev/mtdblock0 rootfstype=squashfs rw console=ttyS0,11
5200
gFlashSize=00000000, query[0]=0051, [1]=0052, [2]=0059
**********BOOTEDFROMFLASH, Base=1e000000
Initial CP0 22 value : 0x00010020
Updated CP0 22 value : 0x00000020
CP0 reg 22 sel 0 to 5: 0xe3800000 0x00000020 0x00000000 0x00000020 0x00000000 0x
00000020
Sundry 0xb0404000, chipId 0x00007401, bcm7401Cx 0x21
CPU revision is: 00020000
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Using 32MB for memory, overwrite by passing mem=xx
User-defined physical RAM map:
node [00000000, 02000000: RAM]
node [02000000, 06000000: RSVD]
<4>bootmem_init: map 0 type 1
<4>bootmem_init: curr_pfn 0x00000307 last_pfn 0x00007fff max_low_pfn 0x00008000
<4>bootmem_init: Done
<7>On node 0 totalpages: 32768
<7> DMA zone: 32768 pages, LIFO batch:15
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
Before resource_init
After resource_init
Built 1 zonelists
<5>Kernel command line: root=/dev/mtdblock0 rootfstype=squashfs rw console=ttyS0
,115200
before init RAC 0x02a0000f 0x804b8000
after init RAC 0x02a0000f 0x07ff0000
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
MIPS_CACHE_ALIASES = ON
end of ld_mmu_r4xx0
end of local_tlb_init
Wired: 17
Index: 0 pgmask=16Mb va=d0000000 asid=00
[pa=d0000000 c=2 d=1 v=1 g=1]
[pa=d1000000 c=2 d=1 v=1 g=1]
Index: 1 pgmask=16Mb va=d2000000 asid=00
[pa=d2000000 c=2 d=1 v=1 g=1]
[pa=d3000000 c=2 d=1 v=1 g=1]
Index: 2 pgmask=16Mb va=d4000000 asid=00
[pa=d4000000 c=2 d=1 v=1 g=1]
[pa=d5000000 c=2 d=1 v=1 g=1]
Index: 3 pgmask=16Mb va=d6000000 asid=00
[pa=d6000000 c=2 d=1 v=1 g=1]
[pa=d7000000 c=2 d=1 v=1 g=1]
Index: 4 pgmask=16Mb va=d8000000 asid=00
[pa=d8000000 c=2 d=1 v=1 g=1]
[pa=d9000000 c=2 d=1 v=1 g=1]
Index: 5 pgmask=16Mb va=da000000 asid=00
[pa=da000000 c=2 d=1 v=1 g=1]
[pa=db000000 c=2 d=1 v=1 g=1]
Index: 6 pgmask=16Mb va=dc000000 asid=00
[pa=dc000000 c=2 d=1 v=1 g=1]
[pa=dd000000 c=2 d=1 v=1 g=1]
Index: 7 pgmask=16Mb va=de000000 asid=00
[pa=de000000 c=2 d=1 v=1 g=1]
[pa=df000000 c=2 d=1 v=1 g=1]
Index: 8 pgmask=16Mb va=e0000000 asid=00
[pa=e0000000 c=2 d=1 v=1 g=1]
[pa=e1000000 c=2 d=1 v=1 g=1]
Index: 9 pgmask=16Mb va=e2000000 asid=00
[pa=e2000000 c=2 d=1 v=1 g=1]
[pa=e3000000 c=2 d=1 v=1 g=1]
Index: 10 pgmask=16Mb va=e4000000 asid=00
[pa=e4000000 c=2 d=1 v=1 g=1]
[pa=e5000000 c=2 d=1 v=1 g=1]
Index: 11 pgmask=16Mb va=e6000000 asid=00
[pa=e6000000 c=2 d=1 v=1 g=1]
[pa=e7000000 c=2 d=1 v=1 g=1]
Index: 12 pgmask=16Mb va=e8000000 asid=00
[pa=e8000000 c=2 d=1 v=1 g=1]
[pa=e9000000 c=2 d=1 v=1 g=1]
Index: 13 pgmask=16Mb va=ea000000 asid=00
[pa=ea000000 c=2 d=1 v=1 g=1]
[pa=eb000000 c=2 d=1 v=1 g=1]
Index: 14 pgmask=16Mb va=ec000000 asid=00
[pa=ec000000 c=2 d=1 v=1 g=1]
[pa=ed000000 c=2 d=1 v=1 g=1]
Index: 15 pgmask=16Mb va=ee000000 asid=00
[pa=ee000000 c=2 d=1 v=1 g=1]
[pa=ef000000 c=2 d=1 v=1 g=1]
Index: 16 pgmask=16Mb va=f0000000 asid=00
[pa=f0000000 c=2 d=1 v=1 g=1]
[pa=f1000000 c=2 d=1 v=1 g=1]
$$$$$$$$$$ 1394 dev id ffffffff
$$$$$$$$$$ mini slot dev id ffffffff
$$$$$$$$$$ external dev id ffffffff
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
timer irq 67 end 57
PID hash table entries: 1024 (order: 10, 16384 bytes)
mips_counter_frequency = 148000000 from Calibration, = 148500000 from header(CPU
_MHz/2)
Using 148.500 MHz high precision timer.
################## brcm_serial_console_init, sercon=8029fa3c
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
free_all_bootmem_core: Free allocator bitmap
Memory: 28356k/131072k available (2412k kernel code, 102644k reserved, 403k data
, 144k init, 0k highmem)
Mount-cache hash table entries: 512
get_RSVD_size: Returning Size 0x06000000
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
usbcore: registered new driver hub
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 66) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Broadcom BCM740121 Ethernet Network Device v1.0 Jan 24 2008 17:59:56
: Reading MAC address from BFFFF824, FLASH_BASE=be000000
: MAC address 00:10:18:01:B3:B7 fetched from addr BFFFF824
: MAC Address: 00:10:18:01:B3:B7
SUNDRY revision = 74010021, have IP Hdr Opt=1
init_buffers: 104 descriptors initialized
init_buffers: 00000068 descriptors initialized, from flowctl
BCMINTMAC: Auto-negotiation timed-out
BCMINTMAC: 10 MB Half-Duplex (assumed)
BCM97XXX flash device: 0x 2000000 at 0x1e000000
Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
fixup_use_write_buffers
fixup_use_erase_chip
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
LB Flash size 8388608
Creating 9 MTD partitions on "Broadcom 9xxxx mapped flash":
0x00000000-0x00380000 : "rootfs1"
0x00380000-0x00400000 : "rootfs2"
0x00400000-0x00450000 : "cfe"
0x00450000-0x00650000 : "app"
0x00650000-0x007f0000 : "kernel"
0x00180000-0x00380000 : "ext"
0x007f0000-0x007ff800 : "skip"
mtd: partition "skip" doesn't end on an erase block -- force read-only
0x007ff800-0x007ff890 : "config"
mtd: partition "config" doesn't start on an erase block boundary -- force read-o
nly
0x007ff890-0x00800000 : "nvram"
mtd: partition "nvram" doesn't start on an erase block boundary -- force read-on
ly
usbmon: debugs is not available
ehci_hcd_brcm_init: Initializing 1 EHCI devices
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
- USB h/w setup mode <F>
- USB power enable set for active LOW mode
- Resetting at b0480310
<-- brcm_ehci_hw_init
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: park 0
brcm-ehci brcm-ehci.0: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
hub 1-0:1.0: over-current change on port 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480508
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27)
usbcore: registered new driver rtl8150
usbcore: registered new driver asix
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
free_initmem: init_begin=802c2000, init_end=802e6000
Freeing unused kernel memory: 144k freed
init started: BusyBox v1.2.1 (2008.01.11-08:29+0000) multi-call binary
Starting pid 17, console /dev/ttyS0: '/etc/init.d/rAlgorithmics/MIPS FPU Emulato
r v1.5
cS'
Mount /proc fs
Mount /dev/pts
ln: /etc/mtab: Read-only file system
Linux
rmmod: bcmdriver: No such file or directory
rmmod: bcm7401: No such file or directory
bcmdriver: no version magic, tainting kernel.
bcmdriver: module license 'Proprietary' taints kernel.
Initializing bcmdriver version $ 11 $
Bootup time start 0
MCK - Using Interrupt Definition for 7402c0 (uname -a)
chipConfigs[19].maxNumIrq = 65
Global Interrupt Mask Low: 0xD15F7FFF, High: 0x1C0C11D3
Initialization complete...
Bootup time end 0
broadcom create task 10 b_event
broadcom create task 30 b_idle
boot time till here (boot bsp start) 0
Before zw_init_i2c_hw
Before zw_init_common_interface
BCHP_EBI_CS_BASE_0 0x1e00000c
BCHP_EBI_CS_CONFIG_0 0x07000411
BCHP_EBI_CS_BASE_1 0x1c00000c
BCHP_EBI_CS_CONFIG_1 0x07000410
BCHP_EBI_CS_BASE_2 0x1f000005
BCHP_EBI_CS_CONFIG_2 0x471080a1
BCHP_EBI_CS_BASE_3 0x00000000
BCHP_EBI_CS_CONFIG_3 0x07000000
boot time till here (boot bsp end) 0
boot time till here (bsettop boot board impl done) 0
boot time till here (xpt done) 0
boot time till here (pboot done) 0
boot time till here (bsettop init) 0
broadcom create task 35 file_io_0
broadcom create task 35 file_io_1
boot time till here (main()) 0
create heap start
create heap end
boot time till heт (os init done) 0
pin mux: 4040bc = a241209
pin mux: 4040c0 = 55631120
DDR PLL: 106818 = 126
gpio dir: 400728 = fffffdff
gpio val: 400724 = 22c00
hw ver 000
boot time till here 0
boot time till here (io init done) 0
^@boot time till here (av hal init done) 0
entered into zw_gfx_hal_init
config graphics 0
config graphics 1
palette get 0
boot time till here (gl init done) 0
flash size = 8192KB 23
msg_create in
create 4
msg_create out 0
task_create in
task_create out ffs 6151
boot time till here (ffs init done) 0
boot time till here (hdmi init done) 0
boot time till here (pvr init done) 0
mountStat 0
boot time till here (Chinese font init done) 0
msg_create in
create 4
msg_create out 32769
task_create in
task_create out gui 7176
boot time till here (gui init done) 0
start app
msg_create in
create 4
msg_create out 65538
task_create in
task_create out app 8201
msg_create in
create 4
msg_create out 98307
task_create in
task_create out 7401Demux 9226
boot time till here (dmx init done) 0
msg_create in
create 4
msg_create out 131076
task_create in
task_create out subt 10251
boot time till here (subt init done) 0
input init
CEC init
<ZINWELL>Send Notify=>TextViewOn
<ZINWELL>Transmit Message=>[0d]
<ZINWELL>Send Notify=>ReportPhysicalAddress
<ZINWELL>Transmit Message=>[84][00][00][04]
boot time till here (CEC init done) 0
<ZINWELL>Retry CEC Message
<ZINWELL>Transmit Message=>[84][00][00][04]
boot time till here (set vformat done) 0
mux: 4040b0 = 92492d9
400708 = ffffefff
400704 = 4c0f1c5
<ZINWELL>Retry CEC Message
<ZINWELL>Transmit Message=>[84][00][00][04]
Found TDA10046 at i2c address 0x8
According to HW register detection, install LGS8913 driver, DemodHandle = 0
[Mode A]
[Serial Mode !]
starting download DSP microcode
download DSP code finish(0xb0) ...
LGS8913 start to init
Calculated Demodulator base address = 0x0
LGS_read error ! I2C Address = 0x6, sub-adress = 0xc2
error in reading register 0xC2!
LGS_write error! I2C Address = 0x6, sub-adress = 0xc2
error in writing register 0xC2 to 03!
boot time till here (tuner init done) 0
task_create in
zw_fp_frontPanelTask GPIO_DATA_LO = 7dfffe20
task_create out ZW_FP 11276
task_create in
task_create out ZW_DISP 12301
boot time till here (fp init done) 0
zw_ssu_init
zw_ssu_ReadLoaderInfo
############ zw_ssu_ReadLoaderInfo #################
stLoader.uiMagicNumber=0xdeadc0de
stLoader.bUpdateVersion=3
stLoader.bUpdateFlag=0
bBandwidth=2
Priority=1
Frequency=762000
uiAppVersion=0x1030009
uiAppImageSize=0x1b9000
abAppMD5Digest: eb c7 87 70 8a 9d 4f 72 ac 66 eb 1 ad 36 1e bc
uiKernVersion=0x1010000
uiKernImageSize=0x16c70c
abKernMD5Digest: 70 ff 33 53 d6 71 8b 47 fb f4 5f 34 64 0 7c b1
uiRootVersion=0x1020000
uiRootImageSize=0x277000
abRootMD5Digest: d2 9 a9 94 c9 2c 4 1e 80 11 85 ca 41 ec 8e 7c
zw_ssu_ReadBoxInfo
BoxInfo.uiOUI=0x59e
BoxInfo.wHwModel=0x1
BoxInfo.wHwVersion=0x1
BoxInfo.wSwModel=0x1
BoxInfo.wSwVersion=0x100
App task run function
Application Init Start
task_create in
task_create out Scantask 13326
Scan Task Created
task_create in
task_create out Tunertask 14351
Tuner Task Created
task_create in
task_create out SItask 15376
task_create in
task_create out EXTtask 16401
Table extract task created
msg_create in
create 4
msg_create out 163845
task_create in
task_create out ttext 17426
Total Service 17
Total Xpndrs 3
Total TV Channels 17
Total Radio Channels 0usUserFavChanCount[0] = 0
usUserFavChanCount[1] = 0
usUserFavChanCount[2] = 0
usUserFavChanCount[3] = 0
usUserFavChanCount[4] = 0
usUserFavChanCount[5] = 0
usUserFavChanCount[6] = 0
usUserFavChanCount[7] = 0
usUserFavChanCount[8] = 0
usUserFavChanCount[9] = 0
volume l/r 85 85
readPictureSetupData
get tv list 17 17
task_create in
task_create out ChanChange 18451
Channel change Task Created
msg_create in
create 4
msg_create out 196614
task_create in
task_create out media 19476
insmod: /lib/modules/2.6.12-4.2-brcmstb/kernel/drivers/cdrom/cdrom.ko: No such f
ile or directory
modprobe: failed to load module cdrom
CC_INIT >>>>>>>>
uiNoOfChanAvailable : 17 ucChannelType : 1
uiNoOfChanAvailable = 17
SCSI subsystem initialized
hw layer create 626 124
hw layer create 1664 232
insmod: /lib/modules/2.6.12-4.2-brcmstb/kernel/drivers/cdrom/cdrom.ko: No such f
ile or directory
sr_mod: Unknown symbol register_cdrom
sr_mod: Unknown symbol cdrom_ioctl
sr_mod: Unknown symbol cdrom_media_changed
sr_mod: Unknown symbol cdrom_release
sr_mod: Unknown symbol cdrom_open
sr_mod: Unknown symbol unregister_cdrom
sr_mod: Unknown symbol cdrom_number_of_slots
insmod: cannot insert `/lib/modules/2.6.12-4.2-brcmstb/kernel/drivers/scsi/sr_mo
d.ko': Unknown symbol in module (2): No such file or directory
modprobe: failed to load module sr_mod
CHKCHNAVL: before display channum: 2
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
modprobe: module isofs not found.
modprobe: failed to load module isofs
modprobe: module udf not found.
modprobe: failed to load module udf
&stSchedEvtData[0] bb5f74
&stSchedEvtData[1] bb6204
&stSchedEvtData[2] bb6494
&stSchedEvtData[3] bb6724
&stSchedEvtData[4] bb69b4
&stSchedEvtData[5] bb6c44
&stSchedEvtData[6] bb6ed4
&stSchedEvtData[7] bb7164
&stSchedEvtData[8] bb73f4
&stSchedEvtData[9] bb7684
&stSchedEvtData[10] bb7914
&stSchedEvtData[11] bb7ba4
&stSchedEvtData[12] bb7e34
&stSchedEvtData[13] bb80c4
&stSchedEvtData[14] bb8354
&stSchedEvtData[15] bb85e4
&stSchedEvtData[16] bb8874
&stSchedEvtData[17] bb8b04
&stSchedEvtData[18] bb8d94
&stSchedEvtData[19] bb9024
&stSchedEvtData[20] bb92b4
&stSchedEvtData[21] bb9544
&stSchedEvtData[22] bb97d4
&stSchedEvtData[23] bb9a64
&stSchedEvtData[24] bb9cf4
&stSchedEvtData[25] bb9f84
&stSchedEvtData[26] bba214
&stSchedEvtData[27] bba4a4
&stSchedEvtData[28] bba734
&stSchedEvtData[29] bba9c4
&stSchedEvtData[30] bbac54
&stSchedEvtData[31] bbaee4
task_create in
task_create out scher 20501
boot time till here (app startup done) 0
App task run function
Application I-Plate Start
Current Xpndr 0
Last Locked Xpndr 255Info: setting -> Set to 8Mhz
Frequency = 682000
send data to tuner is 0x10 0xd5 0xca 0xac 0x80 0xac
priority is high
FE_LOCKED >>>>>>>>
CC_SHOW_CHANNEL >>>>>>>>
AUX Enabled: PIP Video
stSerDetails.usAudioPid[0] = 331
stSerDetails.ucAudioStreamType[0] = 11
stSerDetails.usAudioPid[1] = 0
stSerDetails.ucAudioStreamType[1] = 0
Video PID: 281 Type: 1b
Audio PID: 331 Type: 12
av play 0 0
Video PID: 119 IsPidScrambled 0
Audio PID: 14b IsPidScrambled 0
Updated database in PMT
clear no signal
write flash 0 583200
Video Format Changed : stVideoFmt = 0
Video Aspect Ratio Changed : stAVStream.info.ar = 6
<agean>prev 0 curr 6
<agean>1280 720 i 0
write flash 0 583200
SystemTimesec = 1209584880
OK, scheduler start to work
04 сентября | 2014г. | 20:28:31
Мобильная версия 
