SifTeam Enigma2 Koala Vuplus DUO Начало Назад

Ответ #15

2boom от 16 Nov, 2010 10:01
Вот список измениний к последнкму релизу
Спойлер :
Description:
Enabled wlan in vuplus machines

Fixed missing meta packages dependencies

Added blacklist support in busybox for vuplus (needed by usb tuners)

Added support for tuner TDA18218

Added extuner as default in vuplus

Fixed bad a867 package in usb tuners panel

Added "depmod -a" in dvbusb init script

Removed old v4l-dvb sources

Fixed missing patch in vuplus v4l-dvb Fixed bootlogo in vuplus Restored enigma2 swloop patch in vuplus-vusolo

Removed old a867 package and patch

Removed swloop patch from vuduo image

Merged a867 driver into v4l-dvb

Updated modules init script

Updated modprobe.conf (fixed a867 and as102 in blacklist)

Merged AF9035 into main v4l-dvb

Added support for A825

Fixed bad pid add/remove handling

Updated checksums.ini with new vusolo modules checksums

Ответ #16

anatoly от 17 Nov, 2010 21:07
SifTeam Enigma2 Extreme Edition vuplus r144
Код: [Выделить]
Вам не разрешен просмотр кода. Войдите или Зарегистрируйтесь для просмотра. USB здесь.

NFI здесь.

Ответ #17

mobilru от 18 Nov, 2010 02:33
опять недоделаная , после прошивки с usb непоявляется что прошивка завершена и висит программинг , подождал чють да перегрузил в итоге всё нормально но сеть неработает.

перезагрузил и сеть заработала а тюнер dvb-t так и непоявился , когда же заработает AF9035

Ответ #18

kladovchk от 27 Nov, 2010 18:17
Включение раздела подкачки панели SIF

Ciao a tutti, oltre agli aggiornamenti frequenti di questi giorni ne ho preparato un'altro che servirà per abilitare una partizione di SWAP direttamente da pannello a differenza di quello che si poteva fare con la sif in precedenza dove era previsto solament lo SWAPFILE.
Per abilitare tale partizione questa dovrà chiaramente essere stata precedentemente creata correttamente poi tramite il pannellino SWAP (TASTO BLU-CONFIGURATION-SWAP) la si potrà abilitare direttamente.
Basterà impostare la voce "ACTIVATE = SI" ed impostare la partizione dedicata dal selettore PARTITION e premere ATTIVA (TASTO VERDE)
Dopo di che basterà riavviare il decoder ed al riavvio dovreste avere la swap abilitata, per verificarlo basterà entrare ancora nel pannello SWAP e controllare che nella parte bassa della finestra subito sopra i tasti colorati ci sia la dicitura "Activated on.....".
Allego i file da utilizzare e alcune screenshot che possono essere utili.
L' archivio .tar.gz che toverete in allegato va scompattato e troverete all' interno una cartella con a sua volta all' interno 2 file, "Swap.py" e "Swap.pyo" che vanno sostituiti a quelli che troverete nel percorso:

/usr/lib/enigma2/python/SIFTeam

Mentre il file "skin_default.xml" va sostituito a quello che trovate nel percorso:

/usr/share/enigma2

Dopo aver sostituito i file bisognerà riavviare la macchina prima di utilizzare la feature.
Se avete dubbi chiedete pure

Grazie

--------------------------------

Код: [Выделить]
Вам не разрешен просмотр кода. Войдите или Зарегистрируйтесь для просмотра.

Ответ #19

homega от 04 Jan, 2011 20:46
SifTeam Enigma2 Extreme Image for Vuo+Duo

fix warning in the compilation of the driver RTL8187L
Removed panel "usb tuners"
Added panel "usb devices"
Preinstalled usbutils
Fixed bug on "end of line" in usbloader
Removed modprobe.conf (now is autogenerated from usbloader dictionary)
Added all usb dvb tuners in usbloader dictionary
Preinstalled on image all v4-dvb modules
Fix wrong patch on last commit for realtek rtl8187l
Big fix for sources code driver rtl8187l
Fixed rtl8187l preinstallation
Reverted latest updated of enigma2.bb
Added wifi in vu+ machine configuration
Changed rtl8187l PN
Added rtl8187 as default in wlan task
Added wpa-supplicant as depency of enigma2 (needed on vu+)
Commented getChannelInfo from WirelessLan plugin (needed for rtl8187l)
Added usbloader
Moved modprobe.conf from extuner to usbloader
Added support crypto arc4 and michael_mic by default for rtl8187l
Missing file on last commit for Realtek RTL8187L (sources prepared by bobsilvio)
Driver for Wifi with chipset Realtek RTL8187L (BETA VERSION)
Readded vu+ machines with correct wpa-supplicant preferred version
Added libdvdcss2 as dependency of dvdplayer
Added missing font "Display" in skin.xml
Increased enigma2 revision
Fixed movie menu alignment issue
Small fixes on extuner
Added support for AverMedia A815M and firmware 5.1.0.0 for af9015
Added support for DVB-T AverMedia A835/B835
Removed now useless customized vuplus machines configurations
Added folder (for now empty) for wifi drivers
Updated vuplus stuff to 20110101
Updated LCN scanner revision
Updated OE to 20101230
Updated enigma2 to 20101231 (80a99b08bd6e0932a420e805d928dc5ae5b80f61)
Upgrade enigma2 plugins to 20101230
Added LCN scanner
Updated crossepg

SifTeam_Extreme_Edition_Vu+Duo_Rev_175_.nfi
SifTeam_Extreme_Edition_Vu+Duo_Rev_175_usb

Ответ #20

oscar333 от 05 Jan, 2011 11:25
Как на 175 имидж установить эмуляторы ?

Ответ #21

anatoly от 05 Jan, 2011 11:33
Цитата: oscar333 от 05 января | 2011г. | 11:25:08
Как на 175 имидж установить эмуляторы ?
Установи плагин VTI panel и через него все необходимое.

Ответ #22

oscar333 от 05 Jan, 2011 12:09
А где взять VTI panel ?

Ответ #23

orlic222 от 05 Jan, 2011 13:29
https://gisclub.tv/index.php?topic=956.0

Ответ #24

orlic222 от 05 Jan, 2011 18:47
не могу поставить эмулятор. vti понель уходит в зелень после запуска. подскожите?

Ответ #25

vovatat от 05 Jan, 2011 20:20
Ставь ихние эмуляторы. Вот.

Ответ #26

orlic222 от 05 Jan, 2011 22:55
спасибо.но пока запустить не получилось

Ответ #27

homega от 06 Jan, 2011 10:23
может это поможет
Спойлер :
Package: cccam
Version: 213-r0
Section: emucam
Architecture: mipsel
Maintainer: CCcam
MD5Sum: e50bcc72f75780e73702c1b8f7ffcd2c
Size: 480706
Filename: cccam_213-r0_mipsel.ipk
Source: none
Description: CCcam-213

Package: mgcamd
Version: 135-r0
Section: emucam
Architecture: mipsel
Maintainer: mgcamd
MD5Sum: a877a190217446eb4d5b9ac137f12a60
Size: 341998
Filename: mgcamd_135-r0_mipsel.ipk
Source: none
Description: mgcamd-135

Package: oscam-93b
Version: 001-r6
Section: emucam
Architecture: mipsel
Maintainer: oscam
MD5Sum: 1cd29ca1330471f540de47cc05c2342f
Size: 375180
Filename: oscam-93b_001-r6_mipsel.ipk
Source: none
Description: oscam dvbapi 093b ok

Package: oscam-sbox
Version: r0
Section: emucam
Architecture: mipsel
Maintainer: oscam-sbox
MD5Sum: b3e21769e2cd5acb6944ac15737e97a4
Size: 502522
Filename: oscam-sbox_r0_mipsel.ipk
Source: none
Description: Oscam-sbox ready to go on sc0 m7 - sc1 093b - usb0 smargo tivusat and usb1 smargo dahlia

Package: oscam-tvsat-internal
Version: 2090-r0
Section: emucam
Architecture: mipsel
Maintainer: oscam
MD5Sum: 7069d50ffd3ff7ce47e7dd52a3c9d41e
Size: 360220
Filename: oscam-tvsat-internal_2090-r0_mipsel.ipk
Source: none
Description: Oscam tvsat internal reader

Package: oscam-v8
Version: r0
Section: emucam
Architecture: mipsel
Maintainer: oscam
MD5Sum: 9f8b11c4555b083a332236f4b7a5ded4
Size: 306340
Filename: oscam-v8_r0_mipsel.ipk
Source: none
Description: Oscam v8 many reader config -see config file

Package: sbox
Version: 00474
Section: emucam
Architecture: mipsel
Maintainer: sbox
MD5Sum: 3421ac993f33cbc6436a08e88c7d52d9
Size: 111298
Filename: sbox_00474_mipsel.ipk
Source: none
Description: sbox cardserver

Package: scam
Version: 359-r0
Section: emucam
Architecture: mipsel
Maintainer: scam
MD5Sum: 5692a8b0d448dbb015e296242eed71f2
Size: 229728
Filename: scam_359-r0_mipsel.ipk
Source: none
Description: scam-359

Спойлер :
CCcam.cfg cccam:mipsel:./var/etc/emud/emu/cccam213/CCcam.cfg
CCcam.prio cccam:mipsel:./var/etc/emud/emu/cccam213/CCcam.prio
CCcam_2.1.3 cccam:mipsel:./var/etc/emud/emu/cccam213/CCcam_2.1.3
Scam_3.59 scam:mipsel:./var/etc/emud/emu/Scam359/Scam_3.59
SoftCam.Key mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/SoftCam.Key
cardserver.conf oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/cardserver.conf,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/cardserver.conf,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/cardserver.conf,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/cardserver.conf,sbox:mipsel:./var/etc/emud/cs/sbox/cardserver.conf
cccamd.list mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/cccamd.list
config scam:mipsel:./var/etc/emud/emu/Scam359/config
constcw scam:mipsel:./var/etc/emud/emu/Scam359/constcw
constcw_older scam:mipsel:./var/etc/emud/emu/Scam359/constcw_older
cryptoworks scam:mipsel:./var/etc/emud/emu/Scam359/cryptoworks
emulator.conf cccam:mipsel:./var/etc/emud/emu/cccam213/emulator.conf,mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/emulator.conf,scam:mipsel:./var/etc/emud/emu/Scam359/emulator.conf
ignore.list mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/ignore.list
irdeto scam:mipsel:./var/etc/emud/emu/Scam359/irdeto
irdeto2 scam:mipsel:./var/etc/emud/emu/Scam359/irdeto2
mg_cfg mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/mg_cfg
mgcamd135 mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/mgcamd135
nagra scam:mipsel:./var/etc/emud/emu/Scam359/nagra
nagra2 scam:mipsel:./var/etc/emud/emu/Scam359/nagra2
newcamd.list mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/newcamd.list
oscam oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/oscam,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/oscam,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/oscam,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/oscam
oscam.ac oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.ac,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.ac,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.ac,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.ac
oscam.cert oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.cert,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.cert,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.cert,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.cert
oscam.conf oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.conf,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.conf,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.conf,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.conf
oscam.guess oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.guess,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.guess,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.guess,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.guess
oscam.ird oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.ird,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.ird,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.ird,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.ird
oscam.server oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.server,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.server,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.server,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.server
oscam.services oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.services,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.services,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.services,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.services
oscam.srvid oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.srvid,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.srvid,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.srvid,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.srvid
oscam.user oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/conf/oscam.user,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/oscam.user,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/conf/oscam.user,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/conf/oscam.user
peer.cfg.example mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/peer.cfg.example
replace.list mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/replace.list
rsakeylist scam:mipsel:./var/etc/emud/emu/Scam359/rsakeylist
sbox oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/sbox,sbox:mipsel:./var/etc/emud/cs/sbox/sbox
sbox.conf oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/sbox.conf,sbox:mipsel:./usr/bin/sbox.conf
sc_cryptoworks scam:mipsel:./var/etc/emud/emu/Scam359/sc_cryptoworks
sc_nagravision scam:mipsel:./var/etc/emud/emu/Scam359/sc_nagravision
sc_videoguard scam:mipsel:./var/etc/emud/emu/Scam359/sc_videoguard
seca scam:mipsel:./var/etc/emud/emu/Scam359/seca
seca2 scam:mipsel:./var/etc/emud/emu/Scam359/seca2
start.sh cccam:mipsel:./var/etc/emud/emu/cccam213/start.sh,mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/start.sh,oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/start.sh,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/start.sh,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/start.sh,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/start.sh,sbox:mipsel:./var/etc/emud/cs/sbox/start.sh,scam:mipsel:./var/etc/emud/emu/Scam359/start.sh
stop.sh cccam:mipsel:./var/etc/emud/emu/cccam213/stop.sh,mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/stop.sh,oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/stop.sh,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/stop.sh,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/stop.sh,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/stop.sh,sbox:mipsel:./var/etc/emud/cs/sbox/stop.sh,scam:mipsel:./var/etc/emud/emu/Scam359/stop.sh
stop_forced.sh cccam:mipsel:./var/etc/emud/emu/cccam213/stop_forced.sh,mgcamd:mipsel:./var/etc/emud/emu/mgcamd135/stop_forced.sh,oscam-93b:mipsel:./var/etc/emud/cs/oscam-93b/stop_forced.sh,oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/stop_forced.sh,oscam-tvsat-internal:mipsel:./var/etc/emud/cs/oscam-tvsat/stop_forced.sh,oscam-v8:mipsel:./var/etc/emud/cs/oscam-v8/stop_forced.sh,sbox:mipsel:./var/etc/emud/cs/sbox/stop_forced.sh,scam:mipsel:./var/etc/emud/emu/Scam359/stop_forced.sh
users.sbox oscam-sbox:mipsel:./var/etc/emud/cs/Oscam_Sbox/conf/users.sbox,sbox:mipsel:./usr/bin/users.sbox
via scam:mipsel:./var/etc/emud/emu/Scam359/via
Спойлер :
# generic informations about emulator
name = mgcamd
version = 1.35
description = mgcamd emulator

# process_to_monitor is the process name checked in process list
# emud check process list for discover if emulator is started/stopped correctly
# THIS IS IMPORTANT:
# due a bug (i think it is because i cannot see any feature in that) the binary "incubusCamd.sh4_e2" will be named only as "incubusCamd.sh4" in process list
# i don't know why and i don't know if the same problem exist with other binaries... so pay attention when you fill this field in your custom emulator configuration
# if you want discover the exact name used in process list you can use this procedure:
# start your emulator
# cuberevo:~# /var/bin/incubusCamd.sh4_e2
#
# get his pid in process list with ps
# cuberevo:~# ps aux | grep incubusCamd.sh4_e2
# 1812 root 29176 S /var/bin/incubusCamd.sh4_e2
#
# read his stat file in proc folder
# cuberevo:~# cat /proc/1812/stat
# 1812 (incubusCamd.sh4) S 1 1812 1812 0 -1 8396864 345 0 12 0 0 9 0 0 15 0 4 0 9142216 29876224 351 4294967295 4194304 4717044 2076585600 2076582496 696479218 0 0 0 16386 4294967295 0 0 17 0 0 0
#
# the name inside the brackets (incubusCamd.sh4) is the name used in process list
process_to_monitor = mgcamd135

# actions scripts
start_script = start.sh
stop_script = stop.sh
stop_forced_script = stop_forced.sh

# stop_max_delay_time is how many time (in seconds) emud wait for process termination before kill it with stop_forced_script
stop_max_delay_time = 5

# emud can parse emulator ecm.info and retrieve some informations
# every emu have his ecm.info format and we need a different parser for every emu
# currently supported format:
# none
# mgcamd
# cccam
# incubuscamd
ecm_info_parser = mgcamd

Ответ #28

vovatat от 06 Jan, 2011 11:40
Цитата: orlic222 от 05 января | 2011г. | 22:55:54
спасибо.но пока запустить не получилось
Поподробнее - что конкретно не запускается? Сам эмулятор?

Ответ #29

orlic222 от 06 Jan, 2011 14:16
нет эмулятор запускается.что то в настройках.там права такиеже 755,644?

« 1 2 3 4 5 »

Вход или Регистрация

SifTeam Enigma2 Koala Vuplus DUO Начало Назад

Вы уверены?