Эмулятор/кардсервер OScam (part 2) Начало Назад

Ответ #1290

volk2003 от 01 Nov, 2018 15:08
Хочу запустить на Оскаме карту Nagra на TiVu.
Поставил в.11436 (там упоминается про награ)
параметры ридера
Спойлер :
[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
fix9993 = 0
detect = cd
nagra_read = 1
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

вот такой лог
Спойлер :
2018/11/01 13:50:28 71E48212 r (reader) lower [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/01 13:50:28 71E48212 r (reader) lower [internal] Tivusat 183E recognized
2018/11/01 13:50:31 71E48212 r (reader) lower [internal] Buffers readed 0 bytes total time_us 3099858
2018/11/01 13:50:34 71E48212 r (reader) lower [internal] Warning: Card returned error on setting ifsd value to 251
2018/11/01 13:50:35 71E48212 r (reader) lower [internal] detect nagra tiger card
2018/11/01 13:50:39 71E48212 r (reader) lower [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/11/01 13:50:42 71E48212 r (reader) lower [internal] T1 Resync command error, trying to reactivate!
2018/11/01 13:50:43 71E48212 r (reader) lower [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/01 13:50:43 71E48212 r (reader) lower [internal] Tivusat 183E recognized
2018/11/01 13:50:46 71E48212 r (reader) lower [internal] Buffers readed 0 bytes total time_us 3099990
2018/11/01 13:50:47 71E48212 r (reader) lower [internal] card system not supported
2018/11/01 13:50:47 71E48212 r (reader) lower [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/11/01 13:50:47 71E48212 r (reader) lower [internal] card initializing error
2018/11/01 13:50:48 00000000 s (main) init for all local cards done

я не знаю специфику награ карт. Подскажите, какую версию оскама взять?
какие особенности ридера, может нужны какие-то персональные данные типа boxkey (как его пересчитать)?
где почитать про это?
спасибо

Ответ #1291

zmej от 01 Nov, 2018 17:23
volk2003, на стримборде пишут, что оптимальным для этой карты будут:
mhz = 368
cardmhz = 368

ну и самое главное - для этой карты в ридере нужно указывать Rsa ключ - параметр rsakey
Где его взять - не знаю...

Ответ #1292

Serjoga от 01 Nov, 2018 17:33
Пробуйте
Спойлер :
RSA BOXKEY Tivusat\Rai 183D, 183E cards:

[reader]
name = tivusat
active = 1
type = phoenix
device = /dev/reader1
clock_freq = 3679824
wait_active = 1
boxkey = 78E92DD76EDC1BE2
rsamod = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
handle_pts = 1
emm_cache = 1
ecm_delay = 0
keepalive = 300
debug = 2

18:52:59.433 tivusat: 2 ECM81 (183D:000000/2136.0) for au[127.0.0.1 xx] [32mdecoded[0m (140/140/140 ms)

[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/reader1
mhz = 368
cardmhz = 368
detect = cd
nagra_read = 2
boxkey = 78E92DD76EDC1BE2
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
group = 1
fallback = 0
emmcache = 1,3,2
caid = 183D
ident = 183D:000000,005411
cacheex_allow_request = 1
ecmwhitelist = 183D:91

2017/10/05 18:34:43 2B01C3C4 c (ecm) au (183D:000000/0000/2136/E38D0373A52E9D70E9CF1DD52CB93419

Ответ #1293

volk2003 от 01 Nov, 2018 18:50
Все равно не идет
такие настройки ридера
Спойлер :
[reader]
label = Tivusat
protocol = internal
device = /dev/sci0
caid = 183D
mhz = 368
cardmhz = 368
wait_active = 1
boxkey = 78E92DD76EDC1BE2
rsamod = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
handle_pts = 1
emm_cache = 1
ecm_delay = 0
keepalive = 300
debug = 2

лог
Спойлер :
2018/11/01 17:47:54 72065D46 r (reader) Tivusat [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2018/11/01 17:47:54 72065D46 r (reader) Tivusat [internal] Reader sci internal, detected box type: vuzero
2018/11/01 17:47:54 72065D46 r (reader) Tivusat [internal] card detected
2018/11/01 17:47:54 27E422FB h (webif) webif: decompressed 176702 bytes back into 435344 bytes
2018/11/01 17:47:54 27E422FB h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2018/11/01 17:47:55 72065D46 r (reader) Tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/01 17:47:55 72065D46 r (reader) Tivusat [internal] Tivusat 183E recognized
2018/11/01 17:47:58 72065D46 r (reader) Tivusat [internal] Buffers readed 0 bytes total time_us 3099940
2018/11/01 17:47:59 72065D46 r (reader) Tivusat [internal] detect nagra tiger card
2018/11/01 17:48:00 72065D46 r (reader) Tivusat [internal] card system not supported
2018/11/01 17:48:00 72065D46 r (reader) Tivusat [internal] Normal mode failed, reverting to Deprecated Mode
2018/11/01 17:48:01 72065D46 r (reader) Tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/01 17:48:01 72065D46 r (reader) Tivusat [internal] Tivusat 183E recognized
2018/11/01 17:48:04 72065D46 r (reader) Tivusat [internal] Buffers readed 0 bytes total time_us 3100113
2018/11/01 17:48:07 72065D46 r (reader) Tivusat [internal] Warning: Card returned error on setting ifsd value to 251
2018/11/01 17:48:08 72065D46 r (reader) Tivusat [internal] detect nagra tiger card
2018/11/01 17:48:12 72065D46 r (reader) Tivusat [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2018/11/01 17:48:15 72065D46 r (reader) Tivusat [internal] T1 Resync command error, trying to reactivate!
2018/11/01 17:48:16 72065D46 r (reader) Tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/01 17:48:16 72065D46 r (reader) Tivusat [internal] Tivusat 183E recognized
2018/11/01 17:48:19 72065D46 r (reader) Tivusat [internal] Buffers readed 0 bytes total time_us 3099825
2018/11/01 17:48:20 72065D46 r (reader) Tivusat [internal] card system not supported
2018/11/01 17:48:20 72065D46 r (reader) Tivusat [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2018/11/01 17:48:20 72065D46 r (reader) Tivusat [internal] card initializing error
2018/11/01 17:48:20 00000000 s (main) init for all local cards done
2018/11/01 17:48:20 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/11/01 17:48:20 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/11/01 17:48:20 00000000 s (anticasc) anti cascading disabled
2018/11/01 17:48:20 177A15B2 c (client) plain dvbapi-client granted (root, au=auto (1 reader))
2018/11/01 17:48:20 177A15B2 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/11/01 17:48:20 177A15B2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/11/01 17:48:25 177A15B2 c (dvbapi) Demuxer 0 found 0 ECMpids and 12 STREAMpids in caPMT
2018/11/01 17:48:25 177A15B2 c (dvbapi) Demuxer 0 found 0 ECMpids and 12 STREAMpids in PMT

Для начала, подскажите версию бинарника, получается что мой бинарник не поддерживает этот тип карт

Ответ #1294

sety от 01 Nov, 2018 19:18
Цитата: volk2003 от 01 ноября | 2018г. | 18:50:25
Все равно не идет
Вот еще в прицепе, пробни, там и бинарник Оскама есть

Ответ #1295

volk2003 от 02 Nov, 2018 11:20
sety, наконец карта опозналась

Спойлер :
2018/11/02 10:16:30 02E6B133 r (reader) tivusat [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14
2018/11/02 10:16:30 02E6B133 r (reader) tivusat [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/11/02 10:16:30 02E6B133 r (reader) tivusat [internal] Calculated work ETU is 7.11 us reader mhz = 450
2018/11/02 10:16:31 0916635B r (reader) emulator [emu] found card system emu
2018/11/02 10:16:31 0916635B r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/11/02 10:16:31 0916635B r (emu) Key file not found in: /etc/tuxbox/config
2018/11/02 10:16:31 0916635B r (emu) Reading key file: /var/keys/SoftCam.Key
2018/11/02 10:16:34 02E6B133 r (reader) tivusat [internal] Buffers readed 0 bytes total time_us 3099722
2018/11/02 10:16:34 02E6B133 r (reader) tivusat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/11/02 10:16:34 02E6B133 r (reader) tivusat [internal] Card responded ok for ifsd request of 251
2018/11/02 10:16:35 02E6B133 r (reader) tivusat [internal] detect nagra tiger card
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [internal] type: NAGRA, caid: 183E, IRD ID: ############
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [internal] ProviderID: 00 00 54 11
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [internal] ready for requests
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [internal] found card system nagra
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] ROM: T I G E R 6 0 1
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] REV: R e v M 8 7
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] SER: ############
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] CAID: 183E
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] Activation Date : 01/01/2009
2018/11/02 10:16:36 02E6B133 r (reader) tivusat [nagra] Expiry Date : 01/01/2038
2018/11/02 10:16:37 00000000 s (main) init for all local cards done
2018/11/02 10:16:37 00000000 s (anticasc) anti cascading disabled
2018/11/02 10:16:37 106DB99D c (client) plain dvbapi-client granted (root, au=auto (2 reader))
2018/11/02 10:16:37 106DB99D c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/11/02 10:16:37 106DB99D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/11/02 10:16:40 106DB99D c (dvbapi) Demuxer 0 found 0 ECMpids and 12 STREAMpids in caPMT
2018/11/02 10:16:40 106DB99D c (dvbapi) Demuxer 0 found 0 ECMpids and 12 STREAMpids in PMT

теперь еще её надо заставить давать валидные DW

Ответ #1296

Serjoga от 02 Nov, 2018 11:32
volk2003, пишут што все што тут внутри работает..только в каком слоте карта? Если в верхнем то должно стоять device = /dev/sci0 ...Ну и свои пользователи надо добавлять...В oscam.conf надо добавлять ето и порт можете выбрать и ставить свой любой. Или же проверте и делайте все ето в конфигах што Вам дал sety

[cccam]
port = 55383
keepalive = 1
Спойлер :
To setup a share, create an [account] in oscam.user for each peer (description, user & password parameters can be changed to your own details)..

Example:
### oscam.user ###

[account]
description = your description, anything, peers name
user = linuxsat1
pwd = support1
group = 1
keepalive = 1
[account]
description = your description, anything, peers name
user = linuxsat2
pwd = support2
group = 1
keepalive = 1
[account]
description = your description, anything, peers name
user = linuxsat3
pwd = support3
group = 1
keepalive = 1
Спойлер :
To create an N line add the [newcamd] protocol to oscam.conf (change 0963:000000 to the caid/ident of your card). port = 34000 can be changed to your own port.

Example:
### oscam.conf ###

[newcamd]
key = 0102030405060708091011121314
port = 34000@0963:000000
Спойлер :
To create an C line add the [cccam] protocol to oscam.conf. port = 12000 can be changed to your own port.

Example:
### oscam.conf ###

[cccam]
port = 12000

Спойлер :
You can now give out N, CWS & C lines. Or readers for oscam, one for cccam and one for newcamd. CWS line is for MGCamd.
your.hostname.org will be your dynamic hostname & 12000, 34000 will be the cccam / newcamd port which is open in your router..
If you are sharing within your own network your.hostname.org will be the ip address of the server..

Example:
N: your.hostname.org 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
CWS = your.hostname.org 34000 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14
C: your.hostname.org 12000 linuxsat1 support1
[reader]
label = your label, anything, peers name
protocol = cccam
device = your.hostname.org,12000
user = linuxsat2
password = support2
group = 1
caid = 0963
cccmaxhops = 2
ccckeepalive = 1
[reader]
label = your label, anything, peers name
protocol = newcamd
key = 0102030405060708091011121314
device = your.hostname.org,34000
user = linuxsat3
password = support3
group = 1
caid = 0963
cccmaxhops = 2
ccckeepalive = 1

Ответ #1297

volk2003 от 02 Nov, 2018 13:37
Serjoga,
я все понимаю, как только доберусь до сигнала, попробую. Есть к меня маленькое подозрение, что мне придется ставить свой бокскей, какой нибудь рса кей и т.д. как это делать пока не знаю.
в любом случае уже хорошо, что карта поддерживается. Спасибо.

Ответ #1298

zmej от 02 Nov, 2018 15:13
Цитата: volk2003 от 02 ноября | 2018г. | 11:20:13
наконец карта опозналась
На каком конфиге ридера распозналась?

Ответ #1299

volk2003 от 02 Nov, 2018 15:37
конфиг ридера (oscam.server)
Спойлер :
[reader]
label = tivusat
enable= 1
protocol = internal
device = /dev/sci0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 500
cardmhz = 357
group = 2
emmcache = 1,3,2
auprovid = 005411
ясное дело, rsakey чужой

кроме того oscam.conf
Спойлер :
[global]
logfile         = stdout
clienttimeout      = 8000
fallbacktimeout      = 4000
clientmaxidle      = 9999999
nice             = -1
WaitForCards      = 1
serialreadertimeout   = 4000
maxlogsize      = 400

[monitor]
port            = 988
nocrypt         =
aulow         = 120
hideclient_to      = 0
monlevel         = 4
appendchaninfo      = 1

[dvbapi]
enabled         = 1
au            = 1
boxtype         = dreambox
user            = root
pmt_mode         = 1
request_mode      = 1

[webif]
httpport         = 8888
httphelplang      = en
httpuser         = oscam
httppwd         = oscam
httprefresh         = 10
httpallowed      = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients   = 0
httpreadonly      = 0
httpsavefullcfg      = 0

[tivusat]
caid = 183E
provid = 000000,005411
srvid =213F,2140,2141,0003,0002,0001,0E1E,0D49,2136,0004,0CEA,2142 , 0D52,0007,04E4,04E3,
0D66,0006,0D4B

[newcamd]
key            = 0102030405060708091011121314
port            = 34000@0B00:000000
keepalive         = 20
здесь нет чегото влияющего кроме как секция tivusat

ну и подключив к сигналу получил лог
Спойлер :
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] ROM: T I G E R 6 0 1
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] REV: R e v M 8 7
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] SER: ############
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] CAID: 183E
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] Activation Date : 01/01/2009
2018/11/02 14:32:49 7A0426DA r (reader) tivusat [nagra] Expiry Date : 01/01/2038
2018/11/02 14:32:49 00000000 s (main) init for all local cards done
2018/11/02 14:32:49 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2018/11/02 14:32:49 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/11/02 14:32:49 00000000 s (anticasc) anti cascading disabled
2018/11/02 14:32:49 34FBDE2B c (client) plain dvbapi-client granted (root, au=on (1 reader))
2018/11/02 14:32:49 34FBDE2B c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/11/02 14:32:49 34FBDE2B c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/11/02 14:32:52 34FBDE2B c (dvbapi) Demuxer 0 ecmpid 0 CAID: 183D ECM_PID: 070A PROVID: 000000
2018/11/02 14:32:52 34FBDE2B c (dvbapi) Demuxer 0 ecmpid 1 CAID: 183E ECM_PID: 0764 PROVID: 000000
2018/11/02 14:32:52 34FBDE2B c (dvbapi) Demuxer 0 found 2 ECMpids and 10 STREAMpids in caPMT
2018/11/02 14:32:52 34FBDE2B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2018/11/02 14:32:52 34FBDE2B c (dvbapi) Demuxer 0 found 2 ECMpids and 10 STREAMpids in PMT
2018/11/02 14:32:56 34FBDE2B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
короче, сходу не пошло, надо разбираться

Ответ #1300

Evg77734 от 02 Nov, 2018 15:52
volk2003, no suitable readers found that can be used for decoding! - не найден подходящий ридер. Так как карта 183E, а в ридере tivusat прописано caid = 183D. Поправьте.

Ответ #1301

volk2003 от 02 Nov, 2018 17:12
Evg77734,
сделал как вы писали
проверил в настройках ридера ив конфе и в сервере и в юсере 183Е

в логе все равно

(dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

а кто знает что значают данные в логе
Спойлер :
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [internal] detect nagra tiger card
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [internal] type: NAGRA, caid: 183E, IRD ID: ############
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [internal] ProviderID: 00 00 54 11
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [internal] ready for requests
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [internal] found card system nagra
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] ROM: T I G E R 6 0 1
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] REV: R e v M 8 7
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] SER: ############
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] CAID: 183E
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] Activation Date : 01/01/2009
2018/11/02 15:58:04 6A9CD537 r (reader) tivusat [nagra] Expiry Date : 01/01/2038
2018/11/02 15:58:05 00000000 s (main) init for all local cards done
почему сериальный номер ###### (это нея их закрыл)?
и дата продления 2038 года?
может и правда надо вычислять бокскей. без него не может даже номер карты зачитать?

Ответ #1302

sergik от 02 Nov, 2018 18:00
Цитата: volk2003 от 02 ноября | 2018г. | 15:37:06
able readers found that can be used for decoding!
А что, файла оскам.юзер вообще нет?

Ответ #1303

volk2003 от 02 Nov, 2018 18:30
sergik,
как это нет?
есть
Спойлер :
[account]
user      = root
pwd      = dreambox
group   = 1
au      = lower
au = tivusat
caid = 183E

Ответ #1304

Марчелла от 02 Nov, 2018 18:39
volk2003, всю папку с конфигами скинь....

« 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 »

Вход или Регистрация

Эмулятор/кардсервер OScam (part 2) Начало Назад

Вы уверены?