MITY
Думаю пойти по следующему пути, раздельно установить oscam и mgcamd, и связать их скриптом любезно предоставленным пользователем baseta  тут, config для oscam с поддержкой 52-й карты можно взять сдесь.

MITY, выкладывай свои файлы настроек эмулей, файлы логов oscam и mgcamd будем смотреть.

Wolf пытался еще экспериментировать бесполезно орт ртр нтв вести тнт спорт и тд  - малевич вот конфиги и лог оскама посмотри пожалста реплей как у тебя-

mg_config
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps au pid
U: { 02 }

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 15 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 }

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 01 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 12 Fortis
B: { 00 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { ссылка новичка: https://some.host.com/keys.php [не активна] }

                                                                    OSCAM CONFIG
[global]
nice = -1
WaitForCards = 1
setirdetoprov = 0

# logging

pidfile = /tmp/oscam.pid
logfile = /tmp/oscam.log
saveinithistory = 1

# monitor

[monitor]
port = 988
nocrypt = 192.168.0.2-192.168.0.200
aulow = 120
hideclient_to = 10
monlevel = 4

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httpcss =
httptpl =
httpscript =
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.255
httpdyndns =
httphideidleclients = 0
httpreadonly = 0

[dvbapi]
enabled = 0
user = root
boxtype = dreambox
au = 1

# protocols

[newcamd]
Key = 0102030405060708091011121314
Port = 10000@4AE0:00000
                                                                      OSCAM-USER
[account]
user = card0
pwd = pwdcard0
group = 1
caid = 4AE0
ident = 4AE0:000000
au = tk
                                                                    OSCAM_SERVER
[reader]
Label = tk
Protocol = internal
Device = /dev/sci0
Group = 1
Fallback = 0
setdrecaid = 4AE0
ident = 4AE0:000000
EMMCache = 1,3,2
                                                ЛОГ ОСКАМА НА КАНАЛЕ ВЕСТИ
(4AE0&000000/038A/0000/0000/37:49E3/6C-C7): found (76 ms) by tk (of 1 avail 1)
2011/08/01 11:52:10 1817 2BCCB4B0 c card0 (4AE0&000000/6991/0000/0000/37:7B17/3B-C2): found (76 ms) by tk (of 1 avail 1)
2011/08/01 11:52:15 1817 2BCCB4B0 c card0 (4AE0&000000/69A0/0000/0000/37:7B17/3B-C2): cache1 (0 ms) by tk (of 0 avail 0)
2011/08/01 11:52:25 1817 2BCCB4B0 c Connection closed to client
2011/08/01 11:52:25 1817 2BCCB4B0 c card0 disconnected  from 127.0.0.1
2011/08/01 11:52:25 1817 2BCCB4B0 c thread 2BCCB4B0 ended!

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Aug  1 12:06:42 2011
-------------------------------------------------------------------------------
2011/08/01 12:06:42 1817 2AAC6850 s >> OSCam <<  cardserver started version 1.00-unstable_svn-ymodv18-t17, build #0 (mips-tuxbox-linux)
2011/08/01 12:06:42 1817 2AAC6850 s version=1.00-unstable_svn-ymodv18-t17, build #0, system=mips-tuxbox-linux, nice=-1
2011/08/01 12:06:42 1817 2AAC6850 s client max. idle=120 sec, debug level=0
2011/08/01 12:06:42 1817 2AAC6850 s max. logsize=unlimited
2011/08/01 12:06:42 1817 2AAC6850 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/08/01 12:06:42 1817 2AAC6850 s auth size=5024
2011/08/01 12:06:42 1817 2AAC6850 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/08/01 12:06:42 1817 2AAC6850 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/08/01 12:06:42 1817 2AAC6850 s signal handling initialized (type=sysv)
2011/08/01 12:06:42 1817 2AAC6850 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/08/01 12:06:42 1817 2AAC6850 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/08/01 12:06:42 1817 2AAC6850 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/08/01 12:06:42 1817 2AAC6850 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/08/01 12:06:42 1817 2AAC6850 s can't open file "/var/tuxbox/config/oscam.keys" softcam keys not loaded
2011/08/01 12:06:42 1817 2AAC6850 s monitor: initialized (fd=9, port=988)
2011/08/01 12:06:42 1817 2AAC6850 s camd33: disabled
2011/08/01 12:06:42 1817 2AAC6850 s camd35: disabled
2011/08/01 12:06:42 1817 2AAC6850 s cs378x: disabled
2011/08/01 12:06:42 1817 2AAC6850 s newcamd: initialized (fd=10, port=10000, crypted)
2011/08/01 12:06:42 1817 2AAC6850 s CAID: 4AE0
2011/08/01 12:06:42 1817 2AAC6850 s provid #0: 000000
2011/08/01 12:06:42 1817 2AAC6850 s cccam: disabled
2011/08/01 12:06:42 1817 2AAC6850 s radegast: disabled
2011/08/01 12:06:42 1817 2AAC6850 s http thread started
2011/08/01 12:06:42 1817 2AAC6850 s creating thread for device /dev/sci0
2011/08/01 12:06:42 1817 2AAC6850 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/08/01 12:06:42 1817 2AAC6850 s waiting for local card init
2011/08/01 12:06:42 1817 2B4CB4B0 h HTTP Server listening on port 8888
2011/08/01 12:06:42 1817 2B8CB4B0 r reader thread started (thread=2B8CB4B0, label=tk, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357) 

Wolf лог оскама брал в папке tmp а вот с логом мжкама сложнее еще толком не разобрался как его вытащить - читал что можно в самом ресе а можно через сторонние программы в любом случае приду сработы разберусь и вечером вылажу. в конфигах все правильно?

Все понял приду сразу выложу хотя только дашло какую херню я сделал в обед -сунул карту в модуль  и обновил ключи теперь день или два будут все работать-балбес. Что предпринять?

в newcamd.list закоментируйте запросы на шару , и посмотрите результат.

В связи с закрытием в Иркутске сигнала местной станции Митрис в эту кодировку, хотелось бы знать, чем её можно открыть. Ш@ра не получится, нужно только работать с оф картой