Unix starttime: 1436689440
Starttime: 12.07.2015 11:24:00
Version: oscam-1.20-unstable_svn-r10892
Compiler: mipsel-unknown-linux-gnu
Box type: ebox5000 (generic)
TempDir: /tmp/.oscam
ConfigDir: /etc/tuxbox/config/oscam-emu/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

For PowerVU the Stream Relay must be used:

IMPORTANT:
   The stream relay needs a fast CPU. Not every STB is fast enough.
   If you cannot fix stuttering with the following guide, likely your CPU is
   too slow.

   For best performance, the "Include ECM in http streams" setting must be enabled.
   If your image supports it (openpli, openatv), you can find it here:
   OpenWebif -> Settings -> Customize
   
   If the setting is not available, you may need to adjust the "ECM fix delay"
   setting in oscam webif (Config -> Stream Relay).
   Increase/Lower it until there is no stuttering.

   When using VU+ devices, make sure to use the latest drivers (June 2015), if
   you encounter any problems.

Channel Config:
1. Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
2. Download and save the .m3u file.
3. Open the .m3u file with a text edior and get the stream link. It looks like this:
   https://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
4. Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1
   https://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
5. Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:
   Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
   Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
   Set Service Type to "1", and enter the correct Service ID for the channel.

Note:
   When using DreamBoxEdit:
   
   A. Go to the list in the middle "Bouquet details".
   B. Right click on a channel, select "IPTV and other streaming services", select "Add".
   C. Select "DVB/TS".
   D. Chosse a name and use the new stream link as URL.
   E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")

Открывает "Первый", "НТВ", "Shop24" (mpeg2 | 36*E)
Ключи записываются в SoftCam.Key