22 ноября | 2024г. | 14:38:09


« предыдущая тема следующая тема »
Страниц:  1 ... 44 45 [46] 47 48 49   Вниз

АвторТема: Настройка интернет через CDMA модемы  (Прочитано 346821 раз)

0 Пользователей и 1 Гость смотрят эту тему.

Оффлайн sergby

  • Падаван
  • *
  • Сообщений: 41
  • Поблагодарили: 22
  • Уважение: 0

  • Страна: by
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #675: 15 ноября | 2013г. | 21:35:36 »
0
8120  и ZTE MF70. Кто-нибудь скрутил? Что-то не идет :-(
  • GI 8120

Оффлайн Салават1982

  • Падаван
  • *
  • Сообщений: 10
  • Поблагодарили: 0
  • Уважение: 0

  • Страна: ru
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #676: 16 ноября | 2013г. | 19:32:48 »
0
Скажите как настроить модем GPRS-EDGE Мотивовский или телефон Sony Ericsson W890i от Мотива на ресивере Gi Avatar2 что работал кардшарик.Какие плагины или прошивку надо.Пробовал вставлять не видит его.
  • GI HD MINI,GI AVATAR 2

Оффлайн Akramiks

  • Падаван
  • *
  • Сообщений: 21
  • Поблагодарили: 6
  • Уважение: 0

  • Страна: ua
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #677: 21 ноября | 2013г. | 21:03:15 »
0
Скажите пожалуйста запустил кто Novatel u727? Помогите пожалуйста настроить!!! dmesg
Спойлер   :
STMicroelectronics Base Distribution version 2.2

Linux/sh4 2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK




stlinux login:
root

Password:




Welcome to STMicroelectronics Base Distribution.



BusyBox v1.18.2 (2011-07-13 20:52:52 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

[root@stlinux]#
clear

[root@stlinux]#
clear
[root@stlinux]#

[root@stlinux]#
clear



[root@stlinux]#
d
m
e
s
g


<5>Linux version 2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK -YW-STM24 0.0.02 v0.1.6 (d26lf@linux-server19) (gcc version 4.5.3 20110525 (STMicroelectronics/Linux Base 4.5.3-79) (GCC) ) #56 PREEMPT Tue Oct 16 16:17:14 CST 2012
<5>Boot params:
<5>... MOUNT_ROOT_RDONLY - 00000001
<5>... RAMDISK_FLAGS     - 00000000
<5>... ORIG_ROOT_DEV     - 00000200
<5>... LOADER_TYPE       - 00000001
<5>... INITRD_START      - 0053d000
<5>... INITRD_SIZE       - 002c34df
<5>Booting machvec: sat7111
<4>Node 0: start_pfn = 0x40000, low = 0x49000
<4>Zone PFN ranges:
<4>  Normal   0x00040000 -> 0x00049000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0: 0x00040000 -> 0x00049000
<7>On node 0 totalpages: 36864
<7>free_area_init_node: node 0, pgdat 80cd12f0, node_mem_map 81000000
<7>  Normal zone: 288 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 36576 pages, LIFO batch:7
<6>STMicroelectronics sat7111 reference board initialisation
<6>STx7111 version 3.x
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 36576
<5>Kernel command line: console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255.0.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000 nwhwconf=device:eth0,hwaddr:24:00:0B:00:99:35 Manufacture=Spark-Project STB_ID=09:00:0B:00:00:99:35
<6>bpa2: partition 'bigphys
area' created at 0x41122000, size 16000 kB (0x00fa0000 B)
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>PVR=04909200 CVR=60880000 PRR=00009a10
<5>I-cache : n_ways=2 n_sets=512 way_incr=16384
<5>I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<5>D-cache : n_ways=2 n_sets=512 way_incr=16384
<5>D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<6>Memory: 113564k/147456k available (3575k kernel code, 1358k data, 136k init)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:600
<4>Failed to enable clk CLKA_REF, ignoring
<4>Failed to enable clk CLKA_PLL0LS, ignoring
<4>Console: colour dummy device 80x25
<6>console [ttyAS1] enabled
<6>sh_tmu: TMU0 used for clock events
<6>sh_tmu: TMU0 used for periodic clock events
<6>sh_tmu: TMU1 used as clock source
<6>Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
<4>Mount-cache hash table entries: 512
<4>CPU: STx7111
<6>NET: Registered protocol family 16
<4>autorequest GPIO-43
<0>------------[ cut here ]------------
<3>Badness at 80a0a870 [verbose debug info unavailable]
<4>
<4>Pid : 1, Comm:               swapper
<4>CPU : 0                      Not tainted  (2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK #56)
<4>
<4>PC is at gpio_ensure_requested+0x58/0x150
<4>PR is at gpio_ensure_requested+0x58/0x150
<4>PC  : 80a0a870 SP  : 8881def4 SR  : 400080f1 TEA : 00000000
<4>R0  : 00000017 R1  : 8881c000 R2  : 8881c000 R3  : 8881c000
<4>R4  : 00000001 R5  : 80cf6fd0 R6  : 000009eb R7  : 0000002f
<4>R8  : 80d2a344 R9  : 81120d44 R10 : 0000002b R11 : 00000003
<4>R12 : 00000000 R13 : ffffffea R14 : 8881def4
<4>MACH: 00000000 MACL: 000000a0 GBR : 00000000 PR  : 80a0a870
<4>
<4>Call trace:
<4> [<80a0a9d0>] gpio_direction_output+0x68/0x160
<4> [<80cd8366>] sat7111_devices_init+0x64/0xf6
<4> [<80a0ad68>] gpio_request+0x0/0x244
<4> [<80a0a968>] gpio_direction_output+0x0/0x160
<4> [<8
080119c>] do_one_initcall+0x44/0x174
<4> [<80cd8302>] sat7111_devices_init+0x0/0xf6
<4> [<8083f24c>] register_irq_proc+0x0/0x98
<4> [<80cd290a>] kernel_init+0x86/0x12c
<4> [<80801158>] do_one_initcall+0x0/0x174
<4> [<80802a60>] kernel_thread_helper+0x8/0x14
<4> [<80cd2884>] kernel_init+0x0/0x12c
<4> [<80802a58>] kernel_thread_helper+0x0/0x14
<4>
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource TMU1
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>Freeing initrd memory: 2829k freed
<4>kptrace: Symbol __alloc_pages_internal not found
<4>kptrace: Symbol __up not found
<6>kptrace: initialised
<5>Slow work thread pool: Starting up
<5>Slow work thread pool: Ready
<6>NTFS driver 2.1.29 [Flags: R/W DEBUG].
<6>JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<6>fuse init (API version 7.13)
<6>JFS: nTxBlock = 910, nTxLock = 7284
<4>yaffs Jul 31 2012 11:57:51 Installing.
<6>msgmni has been set to 227
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>STMicroelectronics ASC driver initialized
<6>stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
<6>stm-asc.1: ttyAS1 at MMIO 0xfd033000
 (irq = 120) is a stm-asc
<6>brd: module loaded
<6>loop: module loaded
<5>physmap platform flash device name=physmap-flash
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash":
<5>0x000000000000-0x000000080000 : "Boot firmware"
<5>0x000000080000-0x000000780000 : "Kernel"
<5>0x000000780000-0x000000800000 : "Reserve"
<6>NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<4>Bad eraseblock 1071 at 0x0000085e0000
<4>Bad eraseblock 2069 at 0x0000102a0000
<4>Bad eraseblock 2353 at 0x000012620000
<4>Bad eraseblock 3529 at 0x00001b920000
<5>Creating 4 MTD partitions on "gen_nand.1":
<5>0x000000000000-0x000000800000 : "Spark kernel"
<5>0x000000800000-0x000018000000 : "Spark Userfs"
<5>0x000018000000-0x000018800000 : "E2 kernel"
<5>0x000018800000-0x00001ff00000 : "E2 Userfs"
<6>STMMAC driver:
<6>     platform registration...
<6>     done!
<6>     PMT module supported
<6>     DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33
<6>     Enhanced descriptor structure
<4>     no valid MAC address;please, use ifconfig or nwhwconfig!
<6>     eth0 - (dev. name: stmmaceth - id: -1, IRQ #133
<6>     IO base addr: 0xfd110000)
<6>STMMAC MII Bus: probed
<6>eth0: PHY ID 00000000 at 0 IRQ 0 (0:00) active
<6>eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright
 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
<6>usbcore: registered new interface driver pegasus
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface driver zd1201
<6>nwhw_config: (eth0) setting mac address: 24:00:0B:00:99:35
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>stm-ehci stm-ehci.0: st-ehci
<6>stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
<6>stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
<6>stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
<6>usb usb1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>stm-ohci stm-ohci.0: stm-ohci
<6>stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
<6>stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
<6>usb usb2: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>Registered led device: HB red
<4>leds-gpio: probe of leds-gpio failed with error -16
<6>sh_tmu: TMU0 kept as earlytimer
<6>sh_tmu: TMU1 kept as earlytimer
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<4>STMicroelectronics - Coprocessors st231
 Init
<4>st-coprocessor-0: No RAM reserved
<4>st231.0 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<4>st-coprocessor-1: No RAM reserved
<4>st231.1 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<6>stm-rng hardware driver 1.0 configured
<5>heartbeat: version 0.1.1 loaded
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>stmmac: Rx Checksum Offload Engine supported
<6>     TX Checksum insertion supported
<4>IP-Config: Complete:
<4>     device=eth0, addr=192.168.0.69, mask=255.255.0.0, gw=192.168.3.1,
<4>     host=lh, domain=, nis-domain=(none),
<4>     bootserver=192.168.3.119, rootserver=192.168.3.119, rootpath=
<5>RAMDISK: gzip image found at block 0
<6>usb 2-1: new full speed USB device using stm-ohci and address 2
<4>VFS: Mounted root (ext2 filesystem) on device 1:0.
<4>Freeing unused kernel memory: 136k freed
<6>usb 2-1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=usbserial_generic
<4>[usb_probe_interface]drive name=usbserial_generic
<4>[usb_probe_interface]drive name=usbserial_generic
<4>[usb_probe_interface]drive name=usbserial_generic
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>block 1008 is bad
<4>block 2006 is bad
<4>block 2290 is bad
<6>PHY: 0:01 - Link is Up - 100/Full
<5>scsi 0:0:0:0: Direct-Access     Novatel  MMC Storage      2.31 PQ: 0 ANSI: 2
<7>usb-storage: device scan complete
<5>sd 0
:0:0:0: [sda] Attached SCSI removable disk
<4>yaffs_read_super: isCheckpointed 0
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<4>Disabling lock debugging due to kernel taint
<1>Load module stos_core [?]            by insmod (pid 744)
<1>Load module stsys_ioctl [252]                by insmod (pid 746)
<6>LXLOAD(video1)       : LX loaded => Base=0x40000000 - Last=0x40152c24 - Size=1387556
<6>LXLOAD(audio1)       : LX loaded => Base=0x40400000 - Last=0x4062bd34 - Size=2276660
<4>ICS init 1 debug_flags 0x40 debug_chan 0x5 connect 0 watchdog 0 bpa2_part 'bigphysarea'
<4>ICS: Using BPA2 partition 'bigphysarea'
<4>Calling ICS_cpu_init(0, 0x7, 0x0)
<7>insmod:ics_cpu_init:349 cpuNum 0 cpuMask 0x7 flags 0x0
<7>insmod:ics_cpu_init:387 cpu 0 ('st40') cpuMask 0x7 ics_state 888f7000
<7>insmod:ics_cpu_init:544 Memory usage : allocated 0 OS used 0 (+0) avail 0
<4>ICS Adding region[0] 0x41122000 0xfa0000
<4>ICS Adding region[1] 0x40000000 0x10000000
<4>EMBX init debug_flags 0x0 debug_chan 0x5
<4>MME module init=1 debug_flags=0x0 pool_size=524288
<7>insmod:mme_init:338 Succeeded on cpu 0 mme_state 88d4b260
<7>insmod:mme_init:342 Memory usage : OS used 0 (+0) avail 0
<4>stapi_all version v1.2.7
<4>stapi_core version v1.2.7
<1>Load module stevt_core [?]           by insmod (pid 809)
<1>Load module stcommon_core [?]                by insmod (pid 809)
<1>Load module sttbx_core [?]           by insmod (pid 809)
<1>Load module stclock_core [250]               by insmod (pid 809)
<1>Load module stclkrv_core [?]         by insmod (pid 809)
<1>Load module stpower_core [249]               by insmod (pid 809)
<1>Load module stfdma_core [248]                by insmod (pid 809)
<4>IRQ 140/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<4>IRQ 141/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<1>Load module stmerge_core [?]         by insmod (pid 809)
<1>Load module stavmem_core [?]         by insmod (pid 809)
<1>Load module stbuffer_core [?]
                by insmod (pid 809)
<1>Load module stinject_core [?]                by insmod (pid 809)
<1>Load module stpio_core [?]           by insmod (pid 809)
<1>Load module stdenc_core [?]          by insmod (pid 809)
<1>Load module stlayer_core [?]         by insmod (pid 809)
<1>Load module stvout_core [?]          by insmod (pid 809)
<1>Load module stvtg_core [?]           by insmod (pid 809)
<1>Load module stvid_core [?]           by insmod (pid 809)
<1>Load module stvin_core [?]           by insmod (pid 809)
<1>Load module stos_core [?]            by insmod (pid 809)
<1>Load module stvmix_core [?]          by insmod (pid 809)
<1>Load module stgxobj_core [?]         by insmod (pid 809)
<1>Load module staudlx_core [246]               by insmod (pid 809)
<1>Load module stcc_core [?]            by insmod (pid 809)
<1>Load module stttx_core [?]           by insmod (pid 809)
<1>Load module stvbi_core [?]           by insmod (pid 809)
<1>Load module stblit_core [?]          by insmod (pid 809)
<1>Load module stsmart_core [243]               by insmod (pid 809)
<1>Load module stnet_core [?]           by insmod (pid 809)
<1>Load module stpti4_core [?]          by insmod (pid 809)
<6>Tuxera NTFS driver 3012.2.25 [Flags: R/W DEBUG MODULE].
<1>Load module ywca_module [190]                by insmod (pid 809)
<7>DVB: register adapter0/demux0 @ minor: 4 (0x04)
<7>DVB: register adapter0/dvr0 @ minor: 5 (0x05)
<7>DVB: register adapter0/demux1 @ minor: 20 (0x14)
<7>DVB: register adapter0/dvr1 @ minor: 21 (0x15)
<7>DVB: register adapter0/demux2 @ minor: 36 (0x24)
<7>DVB: register adapter0/dvr2 @ minor: 37 (0x25)
<7>DVB: register adapter0/demux3 @ minor: 52 (0x34)
<7>DVB: register adapter0/dvr3 @ minor: 53 (0x35)
<7>DVB: register adapter0/ca0 @ minor: 6 (0x06)
<7>DVB: register adapter0/ca1 @ minor: 22 (0x16)
<7>DVB: register adapter0/ca2 @ minor: 38 (0x26)
<7>DVB: register adapter0/ca3 @ minor: 54 (0x36)
<7>DVB: register adapter0/swap0 @ minor: 15 (0x0f)
<1>Load module smart_module [169]
              by insmod (pid 809)
<4>stapi_ioctl version v1.2.7
<1>Load module stevt_ioctl [242]                by insmod (pid 809)
<1>Load module stcommon_ioctl [241]     by insmod (pid 809)
<1>Load module sttbx_ioctl [240]                by insmod (pid 809)
<1>Load module stclkrv_ioctl [239]              by insmod (pid 809)
<1>Load module stpower_ioctl [238]              by insmod (pid 809)
<1>Load module stfdma_ioctl [237]               by insmod (pid 809)
<1>Load module stmerge_ioctl [235]              by insmod (pid 809)
<1>Load module stavmem_ioctl [234]              by insmod (pid 809)
<1>Load module stbuffer_ioctl [233]     by insmod (pid 809)
<1>Load module stinject_ioctl [232]     by insmod (pid 809)
<1>Load module stspi_ioctl [230]                by insmod (pid 809)
<1>Load module stpio_ioctl [229]                by insmod (pid 809)
<1>Load module stdenc_ioctl [227]               by insmod (pid 809)
<1>Load module stlayer_ioctl [226]              by insmod (pid 809)
<1>Load module stvout_ioctl [225]               by insmod (pid 809)
<1>Load module stvtg_ioctl [224]                by insmod (pid 809)
<1>Load module stvid_ioctl [223]                by insmod (pid 809)
<1>Load module stvin_ioctl [222]                by insmod (pid 809)
<1>Load module stvmix_ioctl [221]               by insmod (pid 809)
<1>Load module stgxobj_ioctl [220]              by insmod (pid 809)
<1>Load module stcc_ioctl [218]         by insmod (pid 809)
<1>Load module stttx_ioctl [217]                by insmod (pid 809)
<1>Load module stvbi_ioctl [216]                by insmod (pid 809)
<1>Load module stblit_ioctl [215]               by insmod (pid 809)
<1>Load module stsys_ioctl [210]                by insmod (pid 809)
<1>Load module stnet_ioctl [209]                by insmod (pid 809)
<1>Load module stpti4_ioctl [207]               by insmod (pid 809)
<6>usbcore: registered new interface driver rt73
<4>rtusb init rt5370 --->
<6>usbcore: registered new interface driver rt5370
<4>rtusb init --->
<6
>usbcore: registered new interface driver rt2870
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211b
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211
<6>usbcore: registered new interface driver r871x_usb_drv
<4>rtw driver version=v2.0.1324.20110126
<6>usbcore: registered new interface driver rtw_usb_drv
<6>USB Serial support registered for GSM modem (1-port)
<4>[usb_probe_interface]drive name=option
<6>option 2-1:1.0: GSM modem (1-port) converter detected
<6>usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
<4>[usb_probe_interface]drive name=option
<6>option 2-1:1.1: GSM modem (1-port) converter detected
<6>usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
<4>[usb_probe_interface]drive name=option
<6>option 2-1:1.2: GSM modem (1-port) converter detected
<6>usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
<4>[usb_probe_interface]drive name=option
<6>option 2-1:1.3: GSM modem (1-port) converter detected
<6>usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
<6>usbcore: registered new interface driver option
<6>option: v0.7.2-linkymod:USB Driver for GSM modems
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
<4>IRQ 156/BLITTER: IRQF_DISABLED is not guaranteed on shared IRQs
<6>input: ywvinput as /device
s/virtual/input/input0
<6>input: droidinput as /devices/virtual/input/input1
<4>IRQ 156/STGFB_Blitter: IRQF_DISABLED is not guaranteed on shared IRQs
<4>*********get viewport handle: 0xc177de74, 0xc177de74
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>*********get viewport handle: 0x0, 0x0
<4>*********get viewport handle: 0xc177de74, 0xc177de74
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>smart_ioctl------------------------->set handle
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<6>warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
[root@stlinux]#
  • Galaxy Innovations Gi S8120

Оффлайн prof-nevzorov

  • Подающий Надежды
  • *
  • Сообщений: 1
  • Поблагодарили: 0
  • Уважение: 0

    • http://openid.yandex.ru/Prof-Nevzorov/
Настройка интернет через CDMA модемы
« Ответ #678: 23 ноября | 2013г. | 02:37:13 »
0
Ув. linky, прошу помощи.
Вроде безпроблемный модем huawei e173 купил, разлочен, но добиться работы никак не получается.
Ни средствами настойки сети 3G ПО 1.2.65, ни с помощью плагина modemdial
Сделал все из первого поста. Результаты команд телнет:
Спойлер   :
[root@stlinux]#/etc/ppp/modemdial start             
 PPPD is offline. Trying to start ...               
Trying to switch: Can't find USB modem for switching
Can't find usb modem   

Спойлер   :
[root@stlinux]#/root/spark/Ad/Patch/sbin/busybox lsusb
Bus 001 Device 001: ID 1d6b:0002                       
Bus 002 Device 001: ID 1d6b:0001                       
Bus 001 Device 002: ID 12d1:1c0b   
Спойлер   :
[root@stlinux]#cat /tmp/switch
просто пустая строка
Спойлер   :
dmesg


<5>Linux version 2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK -YW-STM24 0.0.02 v0.1.6 (d26lf@linux-server19) (gcc version 4.5.3 20110525 (STMicroelectronics/Linux Base 4.5.3-79) (GCC) ) #56 PREEMPT Tue Oct 16 16:17:14 CST 2012
<5>Boot params:
<5>... MOUNT_ROOT_RDONLY - 00000001
<5>... RAMDISK_FLAGS     - 00000000
<5>... ORIG_ROOT_DEV     - 00000200
<5>... LOADER_TYPE       - 00000001
<5>... INITRD_START      - 0053d000
<5>... INITRD_SIZE       - 002c34df
<5>Booting machvec: sat7111
<4>Node 0: start_pfn = 0x40000, low = 0x49000
<4>Zone PFN ranges:
<4>  Normal   0x00040000 -> 0x00049000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0: 0x00040000 -> 0x00049000
<7>On node 0 totalpages: 36864
<7>free_area_init_node: node 0, pgdat 80cd12f0, node_mem_map 81000000
<7>  Normal zone: 288 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 36576 pages, LIFO batch:7
<6>STMicroelectronics sat7111 reference board initialisation
<6>STx7111 version 3.x
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 36576
<5>Kernel command line: console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 ip=192.168.0.69:192.168.0.119:192.168.0.1:255.255.255.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000 nwhwconf=device:eth0,hwaddr:24:00:0B:02:13:DD Manufacture=Spark-Project STB_ID=09:00:0B:00:02:13:DD
<6>bpa2: partition 'bigphysarea' created at 0x41122000, size 16000 kB (0x00fa0000 B)
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>PVR=04909200 CVR=60880000 PRR=00009a10
<5>I-cache : n_ways=2 n_sets=512 way_incr=16384
<5>I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<5>D-cache : n_ways=2 n_sets=512 way_incr=16384
<5>D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4

<6>Memory: 113564k/147456k available (3575k kernel code, 1358k data, 136k init)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:600
<4>Failed to enable clk CLKA_REF, ignoring
<4>Failed to enable clk CLKA_PLL0LS, ignoring
<4>Console: colour dummy device 80x25
<6>console [ttyAS1] enabled
<6>sh_tmu: TMU0 used for clock events
<6>sh_tmu: TMU0 used for periodic clock events
<6>sh_tmu: TMU1 used as clock source
<6>Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
<4>Mount-cache hash table entries: 512
<4>CPU: STx7111
<6>NET: Registered protocol family 16
<4>autorequest GPIO-43
<0>------------[ cut here ]------------
<3>Badness at 80a0a870 [verbose debug info unavailable]
<4>
<4>Pid : 1, Comm:               swapper
<4>CPU : 0                      Not tainted  (2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK #56)
<4>
<4>PC is at gpio_ensure_requested+0x58/0x150
<4>PR is at gpio_ensure_requested+0x58/0x150
<4>PC  : 80a0a870 SP  : 8881def4 SR  : 400080f1 TEA : 00000000
<4>R0  : 00000017 R1  : 8881c000 R2  : 8881c000 R3  : 8881c000
<4>R4  : 00000001 R5  : 80cf6fd0 R6  : 000009ed R7  : 0000002f
<4>R8  : 80d2a344 R9  : 81120d44 R10 : 0000002b R11 : 00000003
<4>R12 : 00000000 R13 : ffffffea R14 : 8881def4
<4>MACH: 00000000 MACL: 000000a0 GBR : 00000000 PR  : 80a0a870
<4>
<4>Call trace:
<4> [<80a0a9d0>] gpio_direction_output+0x68/0x160
<4> [<80cd8366>] sat7111_devices_init+0x64/0xf6
<4> [<80a0ad68>] gpio_request+0x0/0x244
<4> [<80a0a968>] gpio_direction_output+0x0/0x160
<4> [<8080119c>] do_one_initcall+0x44/0x174
<4> [<80cd8302>] sat7111_devices_init+0x0/0xf6
<4> [<8083f24c>] register_irq_proc+0x0/0x98
<4> [<80cd290a>] kernel_init+0x86/0x12c
<4> [<80801158>] do_one_initcall+0x0/0x174
<4> [<80802a60>] kernel_thread_helper+0x8/0x14
<4> [<80cd2884>] kernel_init+0x0/0x12c
<4> [<80802a58>] kernel_thread_helper+0x0/0x14
<4>
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered ne
w interface driver hub
<6>usbcore: registered new device driver usb
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource TMU1
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>Freeing initrd memory: 2829k freed
<4>kptrace: Symbol __alloc_pages_internal not found
<4>kptrace: Symbol __up not found
<6>kptrace: initialised
<5>Slow work thread pool: Starting up
<5>Slow work thread pool: Ready
<6>NTFS driver 2.1.29 [Flags: R/W DEBUG].
<6>JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<6>fuse init (API version 7.13)
<6>JFS: nTxBlock = 910, nTxLock = 7284
<4>yaffs Jul 31 2012 11:57:51 Installing.
<6>msgmni has been set to 227
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>STMicroelectronics ASC driver initialized
<6>stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
<6>stm-asc.1: ttyAS1 at MMIO 0xfd033000 (irq = 120) is a stm-asc
<6>brd: module loaded
<6>loop: module loaded
<5>physmap platform flash device name=physmap-flash
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash":

<5>0x000000000000-0x000000080000 : "Boot firmware"
<5>0x000000080000-0x000000780000 : "Kernel"
<5>0x000000780000-0x000000800000 : "Reserve"
<6>NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<4>Bad eraseblock 2714 at 0x000015340000
<4>Bad eraseblock 2720 at 0x000015400000
<4>Bad eraseblock 2730 at 0x000015540000
<4>Bad eraseblock 2814 at 0x000015fc0000
<4>Bad eraseblock 2970 at 0x000017340000
<4>Bad eraseblock 3436 at 0x00001ad80000
<4>Bad eraseblock 3564 at 0x00001bd80000
<5>Creating 4 MTD partitions on "gen_nand.1":
<5>0x000000000000-0x000000800000 : "Spark kernel"
<5>0x000000800000-0x000018000000 : "Spark Userfs"
<5>0x000018000000-0x000018800000 : "E2 kernel"
<5>0x000018800000-0x00001ff00000 : "E2 Userfs"
<6>STMMAC driver:
<6>     platform registration...
<6>     done!
<6>     PMT module supported
<6>     DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33
<6>     Enhanced descriptor structure
<4>     no valid MAC address;please, use ifconfig or nwhwconfig!
<6>     eth0 - (dev. name: stmmaceth - id: -1, IRQ #133
<6>     IO base addr: 0xfd110000)
<6>STMMAC MII Bus: probed
<6>eth0: PHY ID 00000000 at 0 IRQ 0 (0:00) active
<6>eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
<6>usbcore: registered new interface driver pegasus
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interf
ace driver zaurus
<6>usbcore: registered new interface driver zd1201
<6>nwhw_config: (eth0) setting mac address: 24:00:0B:02:13:DD
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>stm-ehci stm-ehci.0: st-ehci
<6>stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
<6>stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
<6>stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
<6>usb usb1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>stm-ohci stm-ohci.0: stm-ohci
<6>stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
<6>stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
<6>usb usb2: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>Registered led device: HB red
<4>leds-gpio: probe of leds-gpio failed with error -16
<6>sh_tmu: TMU0 kept as earlytimer
<6>sh_tmu: TMU1 kept as earlytimer
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<4>STMicroelectronics - Coprocessors st231 Init
<4>st-coprocessor-0: No RAM reserved
<4>st231.0 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<4>st-coprocessor-1: No RAM reserved
<4>st231.1 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------


<6>stm-rng hardware driver 1.0 configured
<5>heartbeat: version 0.1.1 loaded
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>stmmac: Rx Checksum Offload Engine supported
<6>     TX Checksum insertion supported
<4>IP-Config: Complete:
<4>     device=eth0, addr=192.168.0.69, mask=255.255.255.0, gw=192.168.0.1,
<4>     host=lh, domain=, nis-domain=(none),
<4>     bootserver=192.168.0.119, rootserver=192.168.0.119, rootpath=
<5>RAMDISK: gzip image found at block 0
<4>VFS: Mounted root (ext2 filesystem) on device 1:0.
<4>Freeing unused kernel memory: 136k freed
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>PHY: 0:01 - Link is Up - 100/Full
<6>usb 1-1: new high speed USB device using stm-ehci and address 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
<5>scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
<7>usb-storage: device scan complete
<7>usb-storage: device scan complete
<5>sd 1:0:0:0: [sda] Attached SCSI removable disk
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<4>Disabling lock debugging due to kernel taint
<1>Load module stos_core [?]            by insmod (pid 728)
<1>Load module stsys_ioctl [252]                by insmod (pid 730
)
<6>LXLOAD(video1)       : LX loaded => Base=0x40000000 - Last=0x40152c24 - Size=1387556
<6>LXLOAD(audio1)       : LX loaded => Base=0x40400000 - Last=0x4062bd34 - Size=2276660
<4>ICS init 1 debug_flags 0x40 debug_chan 0x5 connect 0 watchdog 0 bpa2_part 'bigphysarea'
<4>ICS: Using BPA2 partition 'bigphysarea'
<4>Calling ICS_cpu_init(0, 0x7, 0x0)
<7>insmod:ics_cpu_init:349 cpuNum 0 cpuMask 0x7 flags 0x0
<7>insmod:ics_cpu_init:387 cpu 0 ('st40') cpuMask 0x7 ics_state 888dd000
<7>insmod:ics_cpu_init:544 Memory usage : allocated 0 OS used 0 (+0) avail 0
<4>ICS Adding region[0] 0x41122000 0xfa0000
<4>ICS Adding region[1] 0x40000000 0x10000000
<4>EMBX init debug_flags 0x0 debug_chan 0x5
<4>MME module init=1 debug_flags=0x0 pool_size=524288
<7>insmod:mme_init:338 Succeeded on cpu 0 mme_state 88d4bb60
<7>insmod:mme_init:342 Memory usage : OS used 0 (+0) avail 0
<4>stapi_all version v1.1.5
<4>stapi_core version v1.1.5
<1>Load module stevt_core [?]           by insmod (pid 793)
<1>Load module stcommon_core [?]                by insmod (pid 793)
<1>Load module sttbx_core [?]           by insmod (pid 793)
<1>Load module stclock_core [250]               by insmod (pid 793)
<1>Load module stclkrv_core [?]         by insmod (pid 793)
<1>Load module stpower_core [249]               by insmod (pid 793)
<1>Load module stfdma_core [248]                by insmod (pid 793)
<4>IRQ 140/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<4>IRQ 141/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<1>Load module stmerge_core [?]         by insmod (pid 793)
<1>Load module stavmem_core [?]         by insmod (pid 793)
<1>Load module stbuffer_core [?]                by insmod (pid 793)
<1>Load module stinject_core [?]                by insmod (pid 793)
<1>Load module stpio_core [?]           by insmod (pid 793)
<1>Load module stdenc_core [?]          by insmod (pid 793)
<1>Load module stlayer_core [?]         by insmod (pid 793)
<1>Load module stvout_core [?]       
   by insmod (pid 793)
<1>Load module stvtg_core [?]           by insmod (pid 793)
<1>Load module stvid_core [?]           by insmod (pid 793)
<1>Load module stvin_core [?]           by insmod (pid 793)
<1>Load module stos_core [?]            by insmod (pid 793)
<1>Load module stvmix_core [?]          by insmod (pid 793)
<1>Load module stgxobj_core [?]         by insmod (pid 793)
<1>Load module staudlx_core [246]               by insmod (pid 793)
<1>Load module stcc_core [?]            by insmod (pid 793)
<1>Load module stttx_core [?]           by insmod (pid 793)
<1>Load module stvbi_core [?]           by insmod (pid 793)
<1>Load module stblit_core [?]          by insmod (pid 793)
<1>Load module stsmart_core [243]               by insmod (pid 793)
<1>Load module stnet_core [?]           by insmod (pid 793)
<1>Load module stpti4_core [?]          by insmod (pid 793)
<6>Tuxera NTFS driver 3012.2.25 [Flags: R/W DEBUG MODULE].
<1>Load module ywca_module [190]                by insmod (pid 793)
<7>DVB: register adapter0/demux0 @ minor: 4 (0x04)
<7>DVB: register adapter0/dvr0 @ minor: 5 (0x05)
<7>DVB: register adapter0/demux1 @ minor: 20 (0x14)
<7>DVB: register adapter0/dvr1 @ minor: 21 (0x15)
<7>DVB: register adapter0/demux2 @ minor: 36 (0x24)
<7>DVB: register adapter0/dvr2 @ minor: 37 (0x25)
<7>DVB: register adapter0/demux3 @ minor: 52 (0x34)
<7>DVB: register adapter0/dvr3 @ minor: 53 (0x35)
<7>DVB: register adapter0/ca0 @ minor: 6 (0x06)
<7>DVB: register adapter0/ca1 @ minor: 22 (0x16)
<7>DVB: register adapter0/ca2 @ minor: 38 (0x26)
<7>DVB: register adapter0/ca3 @ minor: 54 (0x36)
<7>DVB: register adapter0/swap0 @ minor: 15 (0x0f)
<1>Load module smart_module [169]               by insmod (pid 793)
<4>stapi_ioctl version v1.1.5
<1>Load module stevt_ioctl [242]                by insmod (pid 793)
<1>Load module stcommon_ioctl [241]     by insmod (pid 793)
<1>Load module sttbx_ioctl [240]                by insmod (pid 793)
<1>Load module stclkrv_ioctl [239]              by insmod (pi
d 793)
<1>Load module stpower_ioctl [238]              by insmod (pid 793)
<1>Load module stfdma_ioctl [237]               by insmod (pid 793)
<1>Load module stmerge_ioctl [235]              by insmod (pid 793)
<1>Load module stavmem_ioctl [234]              by insmod (pid 793)
<1>Load module stbuffer_ioctl [233]     by insmod (pid 793)
<1>Load module stinject_ioctl [232]     by insmod (pid 793)
<1>Load module stspi_ioctl [230]                by insmod (pid 793)
<1>Load module stpio_ioctl [229]                by insmod (pid 793)
<1>Load module stdenc_ioctl [227]               by insmod (pid 793)
<1>Load module stlayer_ioctl [226]              by insmod (pid 793)
<1>Load module stvout_ioctl [225]               by insmod (pid 793)
<1>Load module stvtg_ioctl [224]                by insmod (pid 793)
<1>Load module stvid_ioctl [223]                by insmod (pid 793)
<1>Load module stvin_ioctl [222]                by insmod (pid 793)
<1>Load module stvmix_ioctl [221]               by insmod (pid 793)
<1>Load module stgxobj_ioctl [220]              by insmod (pid 793)
<1>Load module stcc_ioctl [218]         by insmod (pid 793)
<1>Load module stttx_ioctl [217]                by insmod (pid 793)
<1>Load module stvbi_ioctl [216]                by insmod (pid 793)
<1>Load module stblit_ioctl [215]               by insmod (pid 793)
<1>Load module stsys_ioctl [210]                by insmod (pid 793)
<1>Load module stnet_ioctl [209]                by insmod (pid 793)
<1>Load module stpti4_ioctl [207]               by insmod (pid 793)
<6>usbcore: registered new interface driver rt73
<4>rtusb init rt5370 --->
<6>usbcore: registered new interface driver rt5370
<4>rtusb init --->
<6>usbcore: registered new interface driver rt2870
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interfa
ce driver zd1211b
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211
<6>usbcore: registered new interface driver r871x_usb_drv
<4>rtw driver version=v2.0.1324.20110126
<6>usbcore: registered new interface driver rtw_usb_drv
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2-linkymod:USB Driver for GSM modems
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
<4>IRQ 156/BLITTER: IRQF_DISABLED is not guaranteed on shared IRQs
<6>input: ywvinput as /devices/virtual/input/input0
<6>input: droidinput as /devices/virtual/input/input1
<4>IRQ 156/STGFB_Blitter: IRQF_DISABLED is not guaranteed on shared IRQs
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>*********get viewport handle: 0x0, 0x0
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>smart_ioctl------------------------->set handle
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<6>warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
[root@stlinux]#





[root@stlinux]#dmesg


<5>Linux version 2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK -YW-STM24 0.0.02 v0.1.6 (d26lf@linux-server19) (gcc version 4.5.3 20110525 (STMicroelectronics/Linux Base 4.5.3-79) (GCC) ) #56 PREEMPT Tue Oct 16 16:17:14 CST 2012
<5>Boot params:
<5>... MOUNT_ROOT_RDONLY - 00000001
<5>... RAMDISK_FLAGS     - 00000000
<5>... ORIG_ROOT_DEV     - 00000200
<5>... LOADER_TYPE       - 00000001
<5>... INITRD_START      - 0053d000
<5>... INITRD_SIZE       - 002c34df
<5>Booting machvec: sat7111
<4>Node 0: start_pfn = 0x40000, low = 0x49000
<4>Zone PFN ranges:
<4>  Normal   0x00040000 -> 0x00049000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0: 0x00040000 -> 0x00049000
<7>On node 0 totalpages: 36864
<7>free_area_init_node: node 0, pgdat 80cd12f0, node_mem_map 81000000
<7>  Normal zone: 288 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 36576 pages, LIFO batch:7
<6>STMicroelectronics sat7111 reference board initialisation
<6>STx7111 version 3.x
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 36576
<5>Kernel command line: console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 ip=192.168.0.69:192.168.0.119:192.168.0.1:255.255.255.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000 nwhwconf=device:eth0,hwaddr:24:00:0B:02:13:DD Manufacture=Spark-Project STB_ID=09:00:0B:00:02:13:DD
<6>bpa2: partition 'bigphysarea' created at 0x41122000, size 16000 kB (0x00fa0000 B)
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>PVR=04909200 CVR=60880000 PRR=00009a10
<5>I-cache : n_ways=2 n_sets=512 way_incr=16384
<5>I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<5>D-cache : n_ways=2 n_sets=512 way_incr=16384
<5>D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<6>Memory: 113564k/147456k available (3575k kernel code,
 1358k data, 136k init)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:600
<4>Failed to enable clk CLKA_REF, ignoring
<4>Failed to enable clk CLKA_PLL0LS, ignoring
<4>Console: colour dummy device 80x25
<6>console [ttyAS1] enabled
<6>sh_tmu: TMU0 used for clock events
<6>sh_tmu: TMU0 used for periodic clock events
<6>sh_tmu: TMU1 used as clock source
<6>Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
<4>Mount-cache hash table entries: 512
<4>CPU: STx7111
<6>NET: Registered protocol family 16
<4>autorequest GPIO-43
<0>------------[ cut here ]------------
<3>Badness at 80a0a870 [verbose debug info unavailable]
<4>
<4>Pid : 1, Comm:               swapper
<4>CPU : 0                      Not tainted  (2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK #56)
<4>
<4>PC is at gpio_ensure_requested+0x58/0x150
<4>PR is at gpio_ensure_requested+0x58/0x150
<4>PC  : 80a0a870 SP  : 8881def4 SR  : 400080f1 TEA : 00000000
<4>R0  : 00000017 R1  : 8881c000 R2  : 8881c000 R3  : 8881c000
<4>R4  : 00000001 R5  : 80cf6fd0 R6  : 000009ed R7  : 0000002f
<4>R8  : 80d2a344 R9  : 81120d44 R10 : 0000002b R11 : 00000003
<4>R12 : 00000000 R13 : ffffffea R14 : 8881def4
<4>MACH: 00000000 MACL: 000000a0 GBR : 00000000 PR  : 80a0a870
<4>
<4>Call trace:
<4> [<80a0a9d0>] gpio_direction_output+0x68/0x160
<4> [<80cd8366>] sat7111_devices_init+0x64/0xf6
<4> [<80a0ad68>] gpio_request+0x0/0x244
<4> [<80a0a968>] gpio_direction_output+0x0/0x160
<4> [<8080119c>] do_one_initcall+0x44/0x174
<4> [<80cd8302>] sat7111_devices_init+0x0/0xf6
<4> [<8083f24c>] register_irq_proc+0x0/0x98
<4> [<80cd290a>] kernel_init+0x86/0x12c
<4> [<80801158>] do_one_initcall+0x0/0x174
<4> [<80802a60>] kernel_thread_helper+0x8/0x14
<4> [<80cd2884>] kernel_init+0x0/0x12c
<4> [<80802a58>] kernel_thread_helper+0x0/0x14
<4>
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new devic
e driver usb
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource TMU1
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>Freeing initrd memory: 2829k freed
<4>kptrace: Symbol __alloc_pages_internal not found
<4>kptrace: Symbol __up not found
<6>kptrace: initialised
<5>Slow work thread pool: Starting up
<5>Slow work thread pool: Ready
<6>NTFS driver 2.1.29 [Flags: R/W DEBUG].
<6>JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<6>fuse init (API version 7.13)
<6>JFS: nTxBlock = 910, nTxLock = 7284
<4>yaffs Jul 31 2012 11:57:51 Installing.
<6>msgmni has been set to 227
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>STMicroelectronics ASC driver initialized
<6>stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
<6>stm-asc.1: ttyAS1 at MMIO 0xfd033000 (irq = 120) is a stm-asc
<6>brd: module loaded
<6>loop: module loaded
<5>physmap platform flash device name=physmap-flash
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash":
<5>0x000000000000-0x000000080000 : "Boot firmware"
<5>0
x000000080000-0x000000780000 : "Kernel"
<5>0x000000780000-0x000000800000 : "Reserve"
<6>NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<4>Bad eraseblock 2714 at 0x000015340000
<4>Bad eraseblock 2720 at 0x000015400000
<4>Bad eraseblock 2730 at 0x000015540000
<4>Bad eraseblock 2814 at 0x000015fc0000
<4>Bad eraseblock 2970 at 0x000017340000
<4>Bad eraseblock 3436 at 0x00001ad80000
<4>Bad eraseblock 3564 at 0x00001bd80000
<5>Creating 4 MTD partitions on "gen_nand.1":
<5>0x000000000000-0x000000800000 : "Spark kernel"
<5>0x000000800000-0x000018000000 : "Spark Userfs"
<5>0x000018000000-0x000018800000 : "E2 kernel"
<5>0x000018800000-0x00001ff00000 : "E2 Userfs"
<6>STMMAC driver:
<6>     platform registration...
<6>     done!
<6>     PMT module supported
<6>     DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33
<6>     Enhanced descriptor structure
<4>     no valid MAC address;please, use ifconfig or nwhwconfig!
<6>     eth0 - (dev. name: stmmaceth - id: -1, IRQ #133
<6>     IO base addr: 0xfd110000)
<6>STMMAC MII Bus: probed
<6>eth0: PHY ID 00000000 at 0 IRQ 0 (0:00) active
<6>eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
<6>usbcore: registered new interface driver pegasus
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface
driver zd1201
<6>nwhw_config: (eth0) setting mac address: 24:00:0B:02:13:DD
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>stm-ehci stm-ehci.0: st-ehci
<6>stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
<6>stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
<6>stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
<6>usb usb1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>stm-ohci stm-ohci.0: stm-ohci
<6>stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
<6>stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
<6>usb usb2: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>Registered led device: HB red
<4>leds-gpio: probe of leds-gpio failed with error -16
<6>sh_tmu: TMU0 kept as earlytimer
<6>sh_tmu: TMU1 kept as earlytimer
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<4>STMicroelectronics - Coprocessors st231 Init
<4>st-coprocessor-0: No RAM reserved
<4>st231.0 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<4>st-coprocessor-1: No RAM reserved
<4>st231.1 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<6>stm-rng hardware driver 1.0 configured
<5>heartbeat
: version 0.1.1 loaded
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>stmmac: Rx Checksum Offload Engine supported
<6>     TX Checksum insertion supported
<4>IP-Config: Complete:
<4>     device=eth0, addr=192.168.0.69, mask=255.255.255.0, gw=192.168.0.1,
<4>     host=lh, domain=, nis-domain=(none),
<4>     bootserver=192.168.0.119, rootserver=192.168.0.119, rootpath=
<5>RAMDISK: gzip image found at block 0
<4>VFS: Mounted root (ext2 filesystem) on device 1:0.
<4>Freeing unused kernel memory: 136k freed
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>PHY: 0:01 - Link is Up - 100/Full
<6>usb 1-1: new high speed USB device using stm-ehci and address 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
<5>scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
<7>usb-storage: device scan complete
<7>usb-storage: device scan complete
<5>sd 1:0:0:0: [sda] Attached SCSI removable disk
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<4>Disabling lock debugging due to kernel taint
<1>Load module stos_core [?]            by insmod (pid 728)
<1>Load module stsys_ioctl [252]                by insmod (pid 730)
<6>LXLOAD(video1)       : LX loaded => Base=0x4000000
0 - Last=0x40152c24 - Size=1387556
<6>LXLOAD(audio1)       : LX loaded => Base=0x40400000 - Last=0x4062bd34 - Size=2276660
<4>ICS init 1 debug_flags 0x40 debug_chan 0x5 connect 0 watchdog 0 bpa2_part 'bigphysarea'
<4>ICS: Using BPA2 partition 'bigphysarea'
<4>Calling ICS_cpu_init(0, 0x7, 0x0)
<7>insmod:ics_cpu_init:349 cpuNum 0 cpuMask 0x7 flags 0x0
<7>insmod:ics_cpu_init:387 cpu 0 ('st40') cpuMask 0x7 ics_state 888dd000
<7>insmod:ics_cpu_init:544 Memory usage : allocated 0 OS used 0 (+0) avail 0
<4>ICS Adding region[0] 0x41122000 0xfa0000
<4>ICS Adding region[1] 0x40000000 0x10000000
<4>EMBX init debug_flags 0x0 debug_chan 0x5
<4>MME module init=1 debug_flags=0x0 pool_size=524288
<7>insmod:mme_init:338 Succeeded on cpu 0 mme_state 88d4bb60
<7>insmod:mme_init:342 Memory usage : OS used 0 (+0) avail 0
<4>stapi_all version v1.1.5
<4>stapi_core version v1.1.5
<1>Load module stevt_core [?]           by insmod (pid 793)
<1>Load module stcommon_core [?]                by insmod (pid 793)
<1>Load module sttbx_core [?]           by insmod (pid 793)
<1>Load module stclock_core [250]               by insmod (pid 793)
<1>Load module stclkrv_core [?]         by insmod (pid 793)
<1>Load module stpower_core [249]               by insmod (pid 793)
<1>Load module stfdma_core [248]                by insmod (pid 793)
<4>IRQ 140/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<4>IRQ 141/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<1>Load module stmerge_core [?]         by insmod (pid 793)
<1>Load module stavmem_core [?]         by insmod (pid 793)
<1>Load module stbuffer_core [?]                by insmod (pid 793)
<1>Load module stinject_core [?]                by insmod (pid 793)
<1>Load module stpio_core [?]           by insmod (pid 793)
<1>Load module stdenc_core [?]          by insmod (pid 793)
<1>Load module stlayer_core [?]         by insmod (pid 793)
<1>Load module stvout_core [?]          by insmod (pid 793)
<1>Load module stvtg_core [?]   
        by insmod (pid 793)
<1>Load module stvid_core [?]           by insmod (pid 793)
<1>Load module stvin_core [?]           by insmod (pid 793)
<1>Load module stos_core [?]            by insmod (pid 793)
<1>Load module stvmix_core [?]          by insmod (pid 793)
<1>Load module stgxobj_core [?]         by insmod (pid 793)
<1>Load module staudlx_core [246]               by insmod (pid 793)
<1>Load module stcc_core [?]            by insmod (pid 793)
<1>Load module stttx_core [?]           by insmod (pid 793)
<1>Load module stvbi_core [?]           by insmod (pid 793)
<1>Load module stblit_core [?]          by insmod (pid 793)
<1>Load module stsmart_core [243]               by insmod (pid 793)
<1>Load module stnet_core [?]           by insmod (pid 793)
<1>Load module stpti4_core [?]          by insmod (pid 793)
<6>Tuxera NTFS driver 3012.2.25 [Flags: R/W DEBUG MODULE].
<1>Load module ywca_module [190]                by insmod (pid 793)
<7>DVB: register adapter0/demux0 @ minor: 4 (0x04)
<7>DVB: register adapter0/dvr0 @ minor: 5 (0x05)
<7>DVB: register adapter0/demux1 @ minor: 20 (0x14)
<7>DVB: register adapter0/dvr1 @ minor: 21 (0x15)
<7>DVB: register adapter0/demux2 @ minor: 36 (0x24)
<7>DVB: register adapter0/dvr2 @ minor: 37 (0x25)
<7>DVB: register adapter0/demux3 @ minor: 52 (0x34)
<7>DVB: register adapter0/dvr3 @ minor: 53 (0x35)
<7>DVB: register adapter0/ca0 @ minor: 6 (0x06)
<7>DVB: register adapter0/ca1 @ minor: 22 (0x16)
<7>DVB: register adapter0/ca2 @ minor: 38 (0x26)
<7>DVB: register adapter0/ca3 @ minor: 54 (0x36)
<7>DVB: register adapter0/swap0 @ minor: 15 (0x0f)
<1>Load module smart_module [169]               by insmod (pid 793)
<4>stapi_ioctl version v1.1.5
<1>Load module stevt_ioctl [242]                by insmod (pid 793)
<1>Load module stcommon_ioctl [241]     by insmod (pid 793)
<1>Load module sttbx_ioctl [240]                by insmod (pid 793)
<1>Load module stclkrv_ioctl [239]              by insmod (pid 793)
<1>Load module stpower_ioctl [238]             
by insmod (pid 793)
<1>Load module stfdma_ioctl [237]               by insmod (pid 793)
<1>Load module stmerge_ioctl [235]              by insmod (pid 793)
<1>Load module stavmem_ioctl [234]              by insmod (pid 793)
<1>Load module stbuffer_ioctl [233]     by insmod (pid 793)
<1>Load module stinject_ioctl [232]     by insmod (pid 793)
<1>Load module stspi_ioctl [230]                by insmod (pid 793)
<1>Load module stpio_ioctl [229]                by insmod (pid 793)
<1>Load module stdenc_ioctl [227]               by insmod (pid 793)
<1>Load module stlayer_ioctl [226]              by insmod (pid 793)
<1>Load module stvout_ioctl [225]               by insmod (pid 793)
<1>Load module stvtg_ioctl [224]                by insmod (pid 793)
<1>Load module stvid_ioctl [223]                by insmod (pid 793)
<1>Load module stvin_ioctl [222]                by insmod (pid 793)
<1>Load module stvmix_ioctl [221]               by insmod (pid 793)
<1>Load module stgxobj_ioctl [220]              by insmod (pid 793)
<1>Load module stcc_ioctl [218]         by insmod (pid 793)
<1>Load module stttx_ioctl [217]                by insmod (pid 793)
<1>Load module stvbi_ioctl [216]                by insmod (pid 793)
<1>Load module stblit_ioctl [215]               by insmod (pid 793)
<1>Load module stsys_ioctl [210]                by insmod (pid 793)
<1>Load module stnet_ioctl [209]                by insmod (pid 793)
<1>Load module stpti4_ioctl [207]               by insmod (pid 793)
<6>usbcore: registered new interface driver rt73
<4>rtusb init rt5370 --->
<6>usbcore: registered new interface driver rt5370
<4>rtusb init --->
<6>usbcore: registered new interface driver rt2870
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211b
<4>
<4> _____     ____    _    ____


<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211
<6>usbcore: registered new interface driver r871x_usb_drv
<4>rtw driver version=v2.0.1324.20110126
<6>usbcore: registered new interface driver rtw_usb_drv
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2-linkymod:USB Driver for GSM modems
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
<4>IRQ 156/BLITTER: IRQF_DISABLED is not guaranteed on shared IRQs
<6>input: ywvinput as /devices/virtual/input/input0
<6>input: droidinput as /devices/virtual/input/input1
<4>IRQ 156/STGFB_Blitter: IRQF_DISABLED is not guaranteed on shared IRQs
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>*********get viewport handle: 0x0, 0x0
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>smart_ioctl------------------------->set handle
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<6>warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
[root@stlinux]#
cat /tmp/switc
h



[root@stlinux]#
dmesg


<5>Linux version 2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK -YW-STM24 0.0.02 v0.1.6 (d26lf@linux-server19) (gcc version 4.5.3 20110525 (STMicroelectronics/Linux Base 4.5.3-79) (GCC) ) #56 PREEMPT Tue Oct 16 16:17:14 CST 2012
<5>Boot params:
<5>... MOUNT_ROOT_RDONLY - 00000001
<5>... RAMDISK_FLAGS     - 00000000
<5>... ORIG_ROOT_DEV     - 00000200
<5>... LOADER_TYPE       - 00000001
<5>... INITRD_START      - 0053d000
<5>... INITRD_SIZE       - 002c34df
<5>Booting machvec: sat7111
<4>Node 0: start_pfn = 0x40000, low = 0x49000
<4>Zone PFN ranges:
<4>  Normal   0x00040000 -> 0x00049000
<4>Movable zone start PFN for each node
<4>early_node_map[1] active PFN ranges
<4>    0: 0x00040000 -> 0x00049000
<7>On node 0 totalpages: 36864
<7>free_area_init_node: node 0, pgdat 80cd12f0, node_mem_map 81000000
<7>  Normal zone: 288 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 36576 pages, LIFO batch:7
<6>STMicroelectronics sat7111 reference board initialisation
<6>STx7111 version 3.x
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 36576
<5>Kernel command line: console=ttyAS1,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 ip=192.168.0.69:192.168.0.119:192.168.0.1:255.255.255.0:lh:eth0:off stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=4000 nwhwconf=device:eth0,hwaddr:24:00:0B:02:13:DD Manufacture=Spark-Project STB_ID=09:00:0B:00:02:13:DD
<6>bpa2: partition 'bigphysarea' created at 0x41122000, size 16000 kB (0x00fa0000 B)
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>PVR=04909200 CVR=60880000 PRR=00009a10
<5>I-cache : n_ways=2 n_sets=512 way_incr=16384
<5>I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<5>D-cache : n_ways=2 n_sets=512 way_incr=16384
<5>D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
<6>Memory: 113564k/147456k available (3575k kernel code,
 1358k data, 136k init)
<6>Hierarchical RCU implementation.
<6>NR_IRQS:600
<4>Failed to enable clk CLKA_REF, ignoring
<4>Failed to enable clk CLKA_PLL0LS, ignoring
<4>Console: colour dummy device 80x25
<6>console [ttyAS1] enabled
<6>sh_tmu: TMU0 used for clock events
<6>sh_tmu: TMU0 used for periodic clock events
<6>sh_tmu: TMU1 used as clock source
<6>Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
<4>Mount-cache hash table entries: 512
<4>CPU: STx7111
<6>NET: Registered protocol family 16
<4>autorequest GPIO-43
<0>------------[ cut here ]------------
<3>Badness at 80a0a870 [verbose debug info unavailable]
<4>
<4>Pid : 1, Comm:               swapper
<4>CPU : 0                      Not tainted  (2.6.32.42_stm24_V4.1-SAT7111_7111-STSDK #56)
<4>
<4>PC is at gpio_ensure_requested+0x58/0x150
<4>PR is at gpio_ensure_requested+0x58/0x150
<4>PC  : 80a0a870 SP  : 8881def4 SR  : 400080f1 TEA : 00000000
<4>R0  : 00000017 R1  : 8881c000 R2  : 8881c000 R3  : 8881c000
<4>R4  : 00000001 R5  : 80cf6fd0 R6  : 000009ed R7  : 0000002f
<4>R8  : 80d2a344 R9  : 81120d44 R10 : 0000002b R11 : 00000003
<4>R12 : 00000000 R13 : ffffffea R14 : 8881def4
<4>MACH: 00000000 MACL: 000000a0 GBR : 00000000 PR  : 80a0a870
<4>
<4>Call trace:
<4> [<80a0a9d0>] gpio_direction_output+0x68/0x160
<4> [<80cd8366>] sat7111_devices_init+0x64/0xf6
<4> [<80a0ad68>] gpio_request+0x0/0x244
<4> [<80a0a968>] gpio_direction_output+0x0/0x160
<4> [<8080119c>] do_one_initcall+0x44/0x174
<4> [<80cd8302>] sat7111_devices_init+0x0/0xf6
<4> [<8083f24c>] register_irq_proc+0x0/0x98
<4> [<80cd290a>] kernel_init+0x86/0x12c
<4> [<80801158>] do_one_initcall+0x0/0x174
<4> [<80802a60>] kernel_thread_helper+0x8/0x14
<4> [<80cd2884>] kernel_init+0x0/0x12c
<4> [<80802a58>] kernel_thread_helper+0x0/0x14
<4>
<4>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new devic
e driver usb
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource TMU1
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<4>Freeing initrd memory: 2829k freed
<4>kptrace: Symbol __alloc_pages_internal not found
<4>kptrace: Symbol __up not found
<6>kptrace: initialised
<5>Slow work thread pool: Starting up
<5>Slow work thread pool: Ready
<6>NTFS driver 2.1.29 [Flags: R/W DEBUG].
<6>JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
<6>ROMFS MTD (C) 2007 Red Hat, Inc.
<6>fuse init (API version 7.13)
<6>JFS: nTxBlock = 910, nTxLock = 7284
<4>yaffs Jul 31 2012 11:57:51 Installing.
<6>msgmni has been set to 227
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>STMicroelectronics ASC driver initialized
<6>stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
<6>stm-asc.1: ttyAS1 at MMIO 0xfd033000 (irq = 120) is a stm-asc
<6>brd: module loaded
<6>loop: module loaded
<5>physmap platform flash device name=physmap-flash
<5>physmap platform flash device: 00800000 at 00000000
<6>physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<5>number of CFI chips: 1
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>RedBoot partition parsing not available
<5>Using physmap partition information
<5>Creating 3 MTD partitions on "physmap-flash":
<5>0x000000000000-0x000000080000 : "Boot firmware"
<5>0
x000000080000-0x000000780000 : "Kernel"
<5>0x000000780000-0x000000800000 : "Reserve"
<6>NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
<6>Scanning device for bad blocks
<4>Bad eraseblock 2714 at 0x000015340000
<4>Bad eraseblock 2720 at 0x000015400000
<4>Bad eraseblock 2730 at 0x000015540000
<4>Bad eraseblock 2814 at 0x000015fc0000
<4>Bad eraseblock 2970 at 0x000017340000
<4>Bad eraseblock 3436 at 0x00001ad80000
<4>Bad eraseblock 3564 at 0x00001bd80000
<5>Creating 4 MTD partitions on "gen_nand.1":
<5>0x000000000000-0x000000800000 : "Spark kernel"
<5>0x000000800000-0x000018000000 : "Spark Userfs"
<5>0x000018000000-0x000018800000 : "E2 kernel"
<5>0x000018800000-0x00001ff00000 : "E2 Userfs"
<6>STMMAC driver:
<6>     platform registration...
<6>     done!
<6>     PMT module supported
<6>     DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33
<6>     Enhanced descriptor structure
<4>     no valid MAC address;please, use ifconfig or nwhwconfig!
<6>     eth0 - (dev. name: stmmaceth - id: -1, IRQ #133
<6>     IO base addr: 0xfd110000)
<6>STMMAC MII Bus: probed
<6>eth0: PHY ID 00000000 at 0 IRQ 0 (0:00) active
<6>eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>PPPoL2TP kernel driver, V1.0
<6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>CSLIP: code copyright 1989 Regents of the University of California.
<6>SLIP linefill/keepalive option.
<6>pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
<6>usbcore: registered new interface driver pegasus
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver zaurus
<6>usbcore: registered new interface
driver zd1201
<6>nwhw_config: (eth0) setting mac address: 24:00:0B:02:13:DD
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>stm-ehci stm-ehci.0: st-ehci
<6>stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
<6>stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
<6>stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
<6>usb usb1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>stm-ohci stm-ohci.0: stm-ohci
<6>stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
<6>stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
<6>usb usb2: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=hub
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>Registered led device: HB red
<4>leds-gpio: probe of leds-gpio failed with error -16
<6>sh_tmu: TMU0 kept as earlytimer
<6>sh_tmu: TMU1 kept as earlytimer
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<4>STMicroelectronics - Coprocessors st231 Init
<4>st-coprocessor-0: No RAM reserved
<4>st231.0 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<4>st-coprocessor-1: No RAM reserved
<4>st231.1 Coprocessor -------------------------------------------
<4>    not configured!
<4>---------------------------------------------------------------
<6>stm-rng hardware driver 1.0 configured
<5>heartbeat
: version 0.1.1 loaded
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm 'NULL'
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>stmmac: Rx Checksum Offload Engine supported
<6>     TX Checksum insertion supported
<4>IP-Config: Complete:
<4>     device=eth0, addr=192.168.0.69, mask=255.255.255.0, gw=192.168.0.1,
<4>     host=lh, domain=, nis-domain=(none),
<4>     bootserver=192.168.0.119, rootserver=192.168.0.119, rootpath=
<5>RAMDISK: gzip image found at block 0
<4>VFS: Mounted root (ext2 filesystem) on device 1:0.
<4>Freeing unused kernel memory: 136k freed
<6>yaffs: dev is 32505860 name is "mtdblock4"
<6>yaffs: passed flags ""
<4>yaffs: Attempting MTD mount on 31.4, "mtdblock4"
<4>yaffs: restored from checkpoint
<4>yaffs_read_super: isCheckpointed 1
<6>PHY: 0:01 - Link is Up - 100/Full
<6>usb 1-1: new high speed USB device using stm-ehci and address 2
<6>usb 1-1: configuration #1 chosen from 1 choice
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi0 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<4>[usb_probe_interface]drive name=usb-storage
<6>scsi1 : SCSI emulation for USB Mass Storage devices
<7>usb-storage: device found at 2
<7>usb-storage: waiting for device to settle before scanning
<5>scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
<5>scsi 1:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
<7>usb-storage: device scan complete
<7>usb-storage: device scan complete
<5>sd 1:0:0:0: [sda] Attached SCSI removable disk
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<4>Disabling lock debugging due to kernel taint
<1>Load module stos_core [?]            by insmod (pid 728)
<1>Load module stsys_ioctl [252]                by insmod (pid 730)
<6>LXLOAD(video1)       : LX loaded => Base=0x4000000
0 - Last=0x40152c24 - Size=1387556
<6>LXLOAD(audio1)       : LX loaded => Base=0x40400000 - Last=0x4062bd34 - Size=2276660
<4>ICS init 1 debug_flags 0x40 debug_chan 0x5 connect 0 watchdog 0 bpa2_part 'bigphysarea'
<4>ICS: Using BPA2 partition 'bigphysarea'
<4>Calling ICS_cpu_init(0, 0x7, 0x0)
<7>insmod:ics_cpu_init:349 cpuNum 0 cpuMask 0x7 flags 0x0
<7>insmod:ics_cpu_init:387 cpu 0 ('st40') cpuMask 0x7 ics_state 888dd000
<7>insmod:ics_cpu_init:544 Memory usage : allocated 0 OS used 0 (+0) avail 0
<4>ICS Adding region[0] 0x41122000 0xfa0000
<4>ICS Adding region[1] 0x40000000 0x10000000
<4>EMBX init debug_flags 0x0 debug_chan 0x5
<4>MME module init=1 debug_flags=0x0 pool_size=524288
<7>insmod:mme_init:338 Succeeded on cpu 0 mme_state 88d4bb60
<7>insmod:mme_init:342 Memory usage : OS used 0 (+0) avail 0
<4>stapi_all version v1.1.5
<4>stapi_core version v1.1.5
<1>Load module stevt_core [?]           by insmod (pid 793)
<1>Load module stcommon_core [?]                by insmod (pid 793)
<1>Load module sttbx_core [?]           by insmod (pid 793)
<1>Load module stclock_core [250]               by insmod (pid 793)
<1>Load module stclkrv_core [?]         by insmod (pid 793)
<1>Load module stpower_core [249]               by insmod (pid 793)
<1>Load module stfdma_core [248]                by insmod (pid 793)
<4>IRQ 140/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<4>IRQ 141/STFDMA_InterruptHandler: IRQF_DISABLED is not guaranteed on shared IRQs
<1>Load module stmerge_core [?]         by insmod (pid 793)
<1>Load module stavmem_core [?]         by insmod (pid 793)
<1>Load module stbuffer_core [?]                by insmod (pid 793)
<1>Load module stinject_core [?]                by insmod (pid 793)
<1>Load module stpio_core [?]           by insmod (pid 793)
<1>Load module stdenc_core [?]          by insmod (pid 793)
<1>Load module stlayer_core [?]         by insmod (pid 793)
<1>Load module stvout_core [?]          by insmod (pid 793)
<1>Load module stvtg_core [?]   
        by insmod (pid 793)
<1>Load module stvid_core [?]           by insmod (pid 793)
<1>Load module stvin_core [?]           by insmod (pid 793)
<1>Load module stos_core [?]            by insmod (pid 793)
<1>Load module stvmix_core [?]          by insmod (pid 793)
<1>Load module stgxobj_core [?]         by insmod (pid 793)
<1>Load module staudlx_core [246]               by insmod (pid 793)
<1>Load module stcc_core [?]            by insmod (pid 793)
<1>Load module stttx_core [?]           by insmod (pid 793)
<1>Load module stvbi_core [?]           by insmod (pid 793)
<1>Load module stblit_core [?]          by insmod (pid 793)
<1>Load module stsmart_core [243]               by insmod (pid 793)
<1>Load module stnet_core [?]           by insmod (pid 793)
<1>Load module stpti4_core [?]          by insmod (pid 793)
<6>Tuxera NTFS driver 3012.2.25 [Flags: R/W DEBUG MODULE].
<1>Load module ywca_module [190]                by insmod (pid 793)
<7>DVB: register adapter0/demux0 @ minor: 4 (0x04)
<7>DVB: register adapter0/dvr0 @ minor: 5 (0x05)
<7>DVB: register adapter0/demux1 @ minor: 20 (0x14)
<7>DVB: register adapter0/dvr1 @ minor: 21 (0x15)
<7>DVB: register adapter0/demux2 @ minor: 36 (0x24)
<7>DVB: register adapter0/dvr2 @ minor: 37 (0x25)
<7>DVB: register adapter0/demux3 @ minor: 52 (0x34)
<7>DVB: register adapter0/dvr3 @ minor: 53 (0x35)
<7>DVB: register adapter0/ca0 @ minor: 6 (0x06)
<7>DVB: register adapter0/ca1 @ minor: 22 (0x16)
<7>DVB: register adapter0/ca2 @ minor: 38 (0x26)
<7>DVB: register adapter0/ca3 @ minor: 54 (0x36)
<7>DVB: register adapter0/swap0 @ minor: 15 (0x0f)
<1>Load module smart_module [169]               by insmod (pid 793)
<4>stapi_ioctl version v1.1.5
<1>Load module stevt_ioctl [242]                by insmod (pid 793)
<1>Load module stcommon_ioctl [241]     by insmod (pid 793)
<1>Load module sttbx_ioctl [240]                by insmod (pid 793)
<1>Load module stclkrv_ioctl [239]              by insmod (pid 793)
<1>Load module stpower_ioctl [238]             
by insmod (pid 793)
<1>Load module stfdma_ioctl [237]               by insmod (pid 793)
<1>Load module stmerge_ioctl [235]              by insmod (pid 793)
<1>Load module stavmem_ioctl [234]              by insmod (pid 793)
<1>Load module stbuffer_ioctl [233]     by insmod (pid 793)
<1>Load module stinject_ioctl [232]     by insmod (pid 793)
<1>Load module stspi_ioctl [230]                by insmod (pid 793)
<1>Load module stpio_ioctl [229]                by insmod (pid 793)
<1>Load module stdenc_ioctl [227]               by insmod (pid 793)
<1>Load module stlayer_ioctl [226]              by insmod (pid 793)
<1>Load module stvout_ioctl [225]               by insmod (pid 793)
<1>Load module stvtg_ioctl [224]                by insmod (pid 793)
<1>Load module stvid_ioctl [223]                by insmod (pid 793)
<1>Load module stvin_ioctl [222]                by insmod (pid 793)
<1>Load module stvmix_ioctl [221]               by insmod (pid 793)
<1>Load module stgxobj_ioctl [220]              by insmod (pid 793)
<1>Load module stcc_ioctl [218]         by insmod (pid 793)
<1>Load module stttx_ioctl [217]                by insmod (pid 793)
<1>Load module stvbi_ioctl [216]                by insmod (pid 793)
<1>Load module stblit_ioctl [215]               by insmod (pid 793)
<1>Load module stsys_ioctl [210]                by insmod (pid 793)
<1>Load module stnet_ioctl [209]                by insmod (pid 793)
<1>Load module stpti4_ioctl [207]               by insmod (pid 793)
<6>usbcore: registered new interface driver rt73
<4>rtusb init rt5370 --->
<6>usbcore: registered new interface driver rt5370
<4>rtusb init --->
<6>usbcore: registered new interface driver rt2870
<4>
<4> _____     ____    _    ____
<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211b
<4>
<4> _____     ____    _    ____


<4>|__  /   _|  _ \  / \  / ___|
<4>  / / | | | | | |/ _ \ \___ \
<4> / /| |_| | |_| / ___ \ ___) |
<4>/____\__, |____/_/   \_\____/
<4>     |___/
<5>Open1211 - version Sun Jun 20 06:30:21 CST 2010
<6>usbcore: registered new interface driver zd1211
<6>usbcore: registered new interface driver r871x_usb_drv
<4>rtw driver version=v2.0.1324.20110126
<6>usbcore: registered new interface driver rtw_usb_drv
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2-linkymod:USB Driver for GSM modems
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
<4>IRQ 156/BLITTER: IRQF_DISABLED is not guaranteed on shared IRQs
<6>input: ywvinput as /devices/virtual/input/input0
<6>input: droidinput as /devices/virtual/input/input1
<4>IRQ 156/STGFB_Blitter: IRQF_DISABLED is not guaranteed on shared IRQs
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>*********get viewport handle: 0x0, 0x0
<4>*********get viewport handle: 0xc177de5c, 0xc177de5c
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>smart_ioctl------------------------->set handle
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<4>save exit: isCheckpointed 1
<6>warning: `vsftpd' uses 32-bit capabilities (legacy support in use)
                   

Оффлайн vvikktt

  • Младший Джедай
  • **
  • Сообщений: 161
  • Поблагодарили: 94
  • Уважение: +3

  • Страна: ru
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #679: 23 ноября | 2013г. | 10:54:10 »
0
Здраствуите. Я на этой теме первый раз,так что сильно не пинаите, хочу  купить avatar 2 .Есть модем 3g E367 от мегафона(разлоченый).
Может ли avatar 2 работать с этим модемом, и если не трудно списочек поддержки модемов 3g,мож у кого есть?
  • Gi matrix2,Harmonic ProView IRD 2900,Scopus IRD 2900

Оффлайн sergby

  • Падаван
  • *
  • Сообщений: 41
  • Поблагодарили: 22
  • Уважение: 0

  • Страна: by
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #680: 03 декабря | 2013г. | 11:45:12 »
0
Цитата: vvikktt от 23 ноября | 2013г. | 10:54:10
Здраствуите. Я на этой теме первый раз,так что сильно не пинаите, хочу  купить avatar 2 .Есть модем 3g E367 от мегафона(разлоченый).
Может ли avatar 2 работать с этим модемом, и если не трудно списочек поддержки модемов 3g,мож у кого есть?
А в ответ тишина. Как и к моим вопросам. Здесь ничего не изменилось за текущую пятилетку. Если "умные" не могут блеснуть своим великолепием с Вашим вопросом, то он повисает в воздухе.
  • GI 8120

Оффлайн ylativ

  • Подающий Надежды
  • *
  • Сообщений: 1
  • Поблагодарили: 0
  • Уважение: 0

  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #681: 10 декабря | 2013г. | 05:10:22 »
0
Цитата: linky от 31 октября | 2013г. | 17:08:25
evgbut,
в файле/etc/ppp/peers/cdmaIT меняй ttyUSB0 на ttyUSB1 ttyUSB2 ttyUSB3 ttyUSB4
Наверное у тебя порт не тот, сейчас ttyUSB0
Настраивал Pantech UM 175 на GI 8120, перечитал больше 20-ти страниц этой темы, а помогло цытированное сообщение. Я думаю его надо добавить в первый пост, тогда у всех будет меньше вопросов по настройках. У меня оказался порт USB7. Спасибо linky.
  • GI 8120

Оффлайн Rozik

  • Подающий Надежды
  • *
  • Сообщений: 1
  • Поблагодарили: 0
  • Уважение: 0

Настройка интернет через CDMA модемы
« Ответ #682: 21 декабря | 2013г. | 12:12:58 »
0
GI S8120 + модем Huawei E173 (Киевстар). Интернет работает , но каждые 50 минут вырубается. Установил Modemdial чтобы не включать вручную.Версия ПО 1.2.45.Что сделать чтобы не выключался ?
  • GI S8120

Оффлайн Хусейн

  • Падаван
  • *
  • Сообщений: 23
  • Поблагодарили: 3
  • Уважение: 0

  • Страна: 00
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #683: 23 декабря | 2013г. | 01:47:36 »
0
Цитата: krei35 от 25 октября | 2013г. | 13:00:57
Привет !!! Прошу помощи. (уже три дня результат ноль)
Есть GI 8120 + HUAWEY-303
3G первел в режим модема
Включил в плагинах
Modemdial
CDMA Pantech
на модеме загорается зеленая лампочка. А интернета нет.
где копать незнаю
СПАСИБО!!!
Привет ! на ПО 65 без Modemdial у меня все :good: работает . Начиная с 64  ПО  на прямую работает , Удачи !!!
  • Gi s8120. Gi s7699.GM XFinder.Vu Solo . Gi Fly

Оффлайн _Maxim

  • Подающий Надежды
  • *
  • Сообщений: 1
  • Поблагодарили: 0
  • Уважение: 0

  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #684: 11 января | 2014г. | 23:39:11 »
0
Цитата: Хусейн от 23 декабря | 2013г. | 01:47:36
Привет ! на ПО 65 без Modemdial у меня все :good: работает . Начиная с 64  ПО  на прямую работает , Удачи !!!
Доброго времени суток! Уважаемый - будте добры рассказать по пунктам как вы подключали e303 свисток к S8120? Все перепробовал , что только мог найти в просторах интернета.
  • GI8120

Оффлайн j-ko

  • Подающий Надежды
  • *
  • Сообщений: 1
  • Поблагодарили: 0
  • Уважение: 0

  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #685: 20 января | 2014г. | 00:10:34 »
0
Помогите подружыть пантек 175ал и 8120 Логи в прикрепленом файле
  • s8120

Оффлайн g18i18g18a18

  • Младший Джедай
  • **
  • Сообщений: 176
  • Поблагодарили: 25
  • Уважение: 0

  • Страна: by
  • Пол: Мужской
    • technosat.ucoz.ru/
Настройка интернет через CDMA модемы
« Ответ #686: 16 апреля | 2014г. | 18:27:04 »
0
Цитата: Хусейн от 23 декабря | 2013г. | 01:47:36
Привет ! на ПО 65 без Modemdial у меня все :good: работает . Начиная с 64  ПО  на прямую работает , Удачи !!!
сам придумал или как 
у меня   ПО  1.2.72
GI 8120 + HUAWEY-303
ничего не работает и модем не определяет
Добавлено  16 апреля | 2014г. | 21:12:59
Цитата: _Maxim от 11 января | 2014г. | 23:39:11
Доброго времени суток! Уважаемый - будте добры рассказать по пунктам как вы подключали e303 свисток к S8120? Все перепробовал , что только мог найти в просторах интернета.
и я всё перепробовал и результата никакого
тюнер тупо не видит модем HUAWEI E303
сколько я ни плясал с бубном, ничего не смог сделать
а эти модемы самые ходовые у нас и вся РБ ими завалена, а люди не могут их настроить
  • GM 990 HD,  VU+ SOLO

Оффлайн g18i18g18a18

  • Младший Джедай
  • **
  • Сообщений: 176
  • Поблагодарили: 25
  • Уважение: 0

  • Страна: by
  • Пол: Мужской
    • technosat.ucoz.ru/
Настройка интернет через CDMA модемы
« Ответ #687: 15 мая | 2014г. | 00:20:40 »
0
я разобрался во всём - ЭТО ЗАЩИТА ОПЕРАТОРА вшитая в модем,  как только его переводишь в режим "только модем" интернет пропадает сразу и навсегда, а вернёшь всё обратно - интернет работает

так что кому повезло прикрутить с помощью вуду и саитологии  HUAWEI E303 hilink LIFE BELARUS , тот счастливчик, а так никаких вариантов
  • GM 990 HD,  VU+ SOLO

Оффлайн linkyАвтор темы

  • Мастер Джедай
  • **
  • Сообщений: 1151
  • Поблагодарили: 1555
  • Уважение: +30

  • Страна: 00
  • Награды:
    За огромный вклад в жизнь форумаОрден Мастера ДжедайЗа активное участие в жизни клуба
Настройка интернет через CDMA модемы
« Ответ #688: 18 июля | 2014г. | 15:30:54 »
0
Цитата: prof-nevzorov от 23 ноября | 2013г. | 02:37:13
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 12d1:1c0b

Судя по сайту USB_ModeSwitch - это новая линейка 173s, скрипт его не знает.
Обновлю usb_modeswitch до версии 2,2,0
  • GI S8120, Amiko Alien 8900

Оффлайн fomik

  • Падаван
  • *
  • Сообщений: 45
  • Поблагодарили: 29
  • Уважение: +2

  • Страна: ru
  • Пол: Мужской
Настройка интернет через CDMA модемы
« Ответ #689: 19 июля | 2014г. | 20:57:08 »
0
Уважаемый linky, помогите прикрутить ZTE MF667 от билайн, из постов выше где-то видел что подключал,  из лога понятно что не видит модем,спасибо
  • Gi s8120, Gi slim3, Gi HD Mini, Ustym 4K Pro
Страниц:  1 ... 44 45 [46] 47 48 49   Вверх
« предыдущая тема следующая тема »
Теги:
 

Похожие темы

  Тема / Автор Ответов Последний ответ
1 Ответов
2277 Просмотров 		Последний ответ 17 мая | 2011г. | 14:53:50
от Softy
15 Ответов
19325 Просмотров 		Последний ответ 27 декабря | 2017г. | 14:40:50
от Schwarz
9 Ответов
8760 Просмотров 		Последний ответ 01 сентября | 2015г. | 19:02:38
от Manul
1 Ответов
3745 Просмотров 		Последний ответ 07 января | 2014г. | 00:23:11
от Const
11 Ответов
9449 Просмотров 		Последний ответ 19 июня | 2016г. | 12:08:06
от Ser6



Продолжая использовать наш форум, Вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу форума.
X

Добро пожаловать!

Мы заметили, что у Вас установлено расширение AdBlock или ему подобное. Пожалуйста добавьте наш Клуб в белый список, внесите этим посильную лепту в его развитие. Спасибо!