=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.07.27 11:57:59 =~=~=~=~=~=~=~=~=~=~=~=
 
BCM73350010
012
Shmoo Version=1.9

MEMC-00000000 RW=00000011 WW=0000004B G=00000001 R=00000008 W=00000013
MEMC-00000001 RW=00000010 WW=00000055 G=00000001 R=00000008 W=00000002 #$
3
COPY CODE
A567

BCM97335B0 CFE v2.17, CFE core v2.12, Endian Mode: Little
Build Date: Thu Sep 29 12:01:32     2011 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.

writing vfd

DDR Freq:      395MHz
CPU speed:     405MHz
Memory Config: 32+16 non-UMA
Device Tech:   1Gb
Total memory:  384MB
Boot Device:   NAND
ECC:           Hamming
Total flash:   128MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.


USB: New device connected to bus 0 hub 1 port 2


USB: Resetting device on bus 0 port 2

USB: Locating Class FF Vendor 148F Product 5370: Not found.
checking usb
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3
Loading: 0x80001000/6641920 0x80656900/137936 Entry address is 0x804d6470
TP1 Entry Address at 0x80000ffc = 804d6470
Starting program at 0x804d6470

Linux version 3.9.6 (plnick@build-plnick) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Mon Mar 30 19:26:57 CEST 2015
Fetching vars from bootloader... found 11 vars.
Early serial console at MMIO32 0x10400b00 (options '115200n')
bootconsole [uart0] enabled
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 pci=1 smp=1 moca=0 usb=1
Using 256 MB + 128 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
bmem: adding 118 MB RESERVED region at 138 MB (0x07600000@0x08a00000)
Zone ranges:
  Normal   [mem 0x00000000-0x0fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00000000-0x0fffffff]
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 7 pages/cpu @81204000 s6400 r8192 d14080 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: bmem=118M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
__ex_table already sorted, skipping sort
Memory: 132356k/262144k available (4989k kernel code, 129788k reserved, 1257k data, 276k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Detected MIPS clock frequency: 404 MHz (202.497 MHz counter)
Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 0002a044 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
PCI2.3->SDRAM window: 512 MB
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: root bus resource [io  0x0400-0x83ff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
PCI host bridge to bus 0000:01
pci_bus 0000:01: root bus resource [mem 0x10510000-0x1051ffff]
pci_bus 0000:01: root bus resource [io  0x8400-0x87ff]
pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource upg
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 258
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10400b40 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10400b80 (irq = 67) is a 16550A
loop: module loaded
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
scsi0 : sata_brcmstb
scsi1 : sata_brcmstb
ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
Broadcom STB NAND controller (BrcmNand Controller)
bcmemac: Broadcom STB 10/100 EMAC driver v3.0
bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:1d:ec:01:81:b5)
bcmemac: not registering interface #1 at 0x10090000 (no PHY detected)
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
EBI CS0: setting up NAND flash (primary)
ata1: SATA link down (SStatus 4 SControl 300)
mtd->oobsize=0, mtd->eccOobSize=0
NAND_CS_NAND_XOR=00000001
B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
Block size=00020000, erase shift=17
NAND Config: Reg=55042200, chipSize=128 MB, blockSize=128K, erase_shift=11
busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
BrcmNAND mfg ec f1 Samsung K9F1G08U0A 128MB on CS0

Found NAND on CS0: ACC=d3000000, cfg=55042200, flashId=ecf10095, tim1=4232222d, tim2=00000d94
BrcmNAND version = 0x0201 128MB @00000000
usb 1-2: new high-speed USB device number 2 using ehci-brcm
B4: NandSelect=40000101, nandConfig=55042200, chipSelect=0
brcmnand_read_id: CS0: dev_id=ecf10095
After: NandSelect=40000101, nandConfig=55042200
Found NAND flash on Chip Select 0, chipSize=128MB, usable size=128MB, base=0
brcmnand_scan: B4 nand_select = 40000101
brcmnand_scan: After nand_select = 40000101
page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17
Brcm NAND controller version = 2.1 NAND flash size 128MB @18000000
ECC layout=brcmnand_oob_bch4_4k
brcmnand_scan:  mtd->oobsize=64
brcmnand_scan: oobavail=50, eccsize=512, writesize=2048
brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=15, eccbytes=3
-->brcmnand_default_bbt
brcmnand_default_bbt: bbt_td = bbt_main_descr
Creating 7 MTD partitions on "brcmnand.0":
0x000000000000-0x000007600000 : "rootfs"
0x000007600000-0x000007a00000 : "kernel"
0x000007a00000-0x000007c00000 : "boot"
0x000007c00000-0x000007d00000 : "cfe"
0x000007d00000-0x000007d80000 : "mac"
0x000007d80000-0x000007e00000 : "env"
0x000007e00000-0x000007f00000 : "nvm"
PM: CP0 COUNT/COMPARE frequency depends on divisor
UBI: attaching mtd0 to ubi0
ata2: SATA link down (SStatus 4 SControl 300)
UBI: scanning is finished
UBI: attached mtd0 (name "rootfs", size 118 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 943, bad PEBs: 1, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 5/1, WL threshold: 4096, image sequence number: 1815153527
UBI: available PEBs: 0, total reserved PEBs: 943, PEBs reserved for bad PEB handling: 19
ALSA device list:
UBI: background thread "ubi_bgt0d" started, PID 47
  No soundcards found.
UBIFS: parse sync
UBIFS: background thread "ubifs_bgt0_0" started, PID 48
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 115421184 bytes (110 MiB, 909 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 1776E467-14E7-48DC-B7D5-593741C9A08A, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:10.
devtmpfs: mounted
Freeing unused kernel memory: 276k freed

INIT: version 2.88 booting

NET: Registered protocol family 10
procmk_init
dvb_bcm7335: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (bm750)
bcm7335: hotplug_callback():
Hotplug - status.connected 0
brcm_demux_init: $Id: bcm7335_demux.c,v 0.6 $
[VID]:
6bcm7335_video_init
[AUD]:
6bcm7335_audio_init
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (BCM7335 FE)...
[MPVR]: >> misc_pvr_init
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
[LCD]: registered
[CI]:-BM750_PCB_2_1

[CI]: registered ci0
[CI]: registered ci1
[DFP]: registered dbox fp
[DFP]: bcm7335_i2c_write: Error 1114113

[DFP]: Scart 9597 is found 4

[SC]: registered sci0
[SC]: registered sci1
system_time_set wakeup mode get
system_time_set wakeup mode get 0xc4
Startting the hotplug events dispatcher
udevd (109): /proc/109/oom_adj is deprecated, please use /proc/109/oom_score_adj instead.
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
udevd-event[238]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory


rtusb init rt2870 --->


=== pAd = e12e1000, size = 511128 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
usbcore: registered new interface driver rt2870
done
Configuring network interfaces... udhcpc (v1.19.4) started
Sending discover...
Sending select for 192.168.1.107...
Lease of 192.168.1.107 obtained, lease time 7200
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
Displaying bootlogo_wait.

INIT: Entering runlevel: 3

[SHOWIFRAME] display logo: /usr/share/vuplus-bootlogo/bootlogo_wait.mvi
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
Starting system message bus: dbus.
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0 
Starting Dropbear SSH server: dropbear.
Starting automounter: loading autofs4 kernel module, done.
starting Busybox Periodic Command Scheduler: crond... done.
crond[764]: crond: crond (busybox 1.19.4) started, log level 8

Starting internet superserver: inetd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
[SHOWIFRAME] display logo: /usr/share/vuplus-bootlogo/backdrop.mvi
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1 
[VID]: VIDEO_PLAY 1  2 0
[VID]: VIDEO_CONTINUE 1  1
[VID]: VIDEO_CLEAR_BUFFER 1  1 0
[VID]: VIDEO_STOP 0  1
[VID]: VIDEO_SELECT_SOURCE 0 
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '/usr', 0)
setenv('bindir', '/usr/bin', 0)
setenv('sbindir', '/usr/sbin', 0)
setenv('libexecdir', '/usr/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '/com', 0)
setenv('localstatedir', '/var', 0)
setenv('libdir', '/usr/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/com', 1)
setenv('localstatedir', '/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
enigma2 is the main pvr application... adjust oom score!
+ (1) Background File Eraser
+ (5) Tuxtxt
+ ( graphics acceleration manager
+ (9) GFBDC
21600k video mem
SetMode : wanted: 1280x720x32, got 1920x1440x32
 - double buffering available!
10800kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 7680)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x73c010 8448 bytes, stride 132
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) Hdmi CEC driver
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ [CI]:ci_dev_open

(21) input devic[CI]:Opening A GPIO's for 7335 platform

e driver
Input [CI]:Opening A GPIO's for 7335 platform....done

device "dreambox[CI]:entering.. A NEXUS_DvbCi_Open

 advanced remote[CI]:NEXUS_DvbCi_Open done..

 control (native[CI]:Installing callbacks

)" is not a keyb[CI]:Forcing card check

oard.
Found 1 i[CI]:Card insertion status changed

nput devices!
+[CI]:Opening B GPIO's for 7335 platform

 (21) Console RC[CI]:Opening B GPIO's for 7335 platform....done

 Driver
failed [CI]:entering.. B NEXUS_DvbCi_Open

to open /dev/tty[CI]:NEXUS_DvbCi_Open done..

0
+ (30) eActio[CI]:Installing callbacks

nMap
+ (35) CI [CI]:Forcing card check

Slots
scanning [CI]:Card B insertion status changed

for common interfaces..
[CI]: CI interface initialised

[CI]:ci1_dev_open

[CI]:NEXUS_Remux_Start CI0 0 0

CI Slot 0 setSource(0)
[CI]:>>close_mpod tuner:0

CI Slot 1 setSou[CI]:remux stop

rce(0)
[CI]:get_remux_startcnt() count : 1

[CI]:get_remux_startcnt() count : 1

eDVBCIInterfaces[CI]:>>close_mpod tuner:1

->setInputSource[CI]:remux stop

(0, 0)
[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt() count : 0

eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
can't open /etc/enigma2/lamedb: No such file or directory
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
close frontend 1
found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 4
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait6.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait6.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait7.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait7.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait8.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait8.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait9.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait9.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait10.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait10.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait11.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait11.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait12.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait12.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait13.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait13.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait14.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait14.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait15.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait15.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait16.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait16.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait17.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait17.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait18.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait18.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait19.png
resolve: -> /usr/share/enigma2/skin_default/spinner/wait19.png
found 18 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/share/enigma2/defaults/
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'mtdblock5': blacklisted
found block device 'mtdblock6': blacklisted
not loading user skin:  [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
[VTi] not loading user defined colors for skin
[VTi] not loading user defined header file for skin
main thread is non-idle! display spinner!
menu_mainmenu
Reading satellites.xml
main thread is non-idle! display spinner!
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/share/enigma2/unicable.xml
[InitNimManager] check multi type slot 0
[InitNimManager] check multi type slot 1
[Nimmanager] slot 0 create config satellite..
[Nimmanager] slot 1 create config satellite..
removing internal link on frontend id 1
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 DVB-S2 NIM (internal), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
slot: 0 configmode: nothing
slot: 1 configmode: nothing
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/share/enigma2/setup.xml
Preferred tag editor set to  None
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
Installing image defaults
Reading .info file /usr/share/enigma2/defaults/VuPlus/vti.info
prerequisites: {u'bcastsystem': ['DVB-C']}
prerequisites: {u'bcastsystem': ['DVB-T']}
prerequisites: {u'hardware': ['vuplus']}
self.packageslist: [({'prerequisites': {u'hardware': ['vuplus']}, 'attributes': {u'config': [{'directory': '/usr/share/enigma2/defaults/VuPlus/', 'name': 'settings.vuplus'}], u'bouquetroot': [{'directory': '/usr/share/enigma2/defaults/VuPlus/', 'name': 'bouquets.tv'}, {'directory': '/usr/share/enigma2/defaults/VuPlus/', 'name': 'radio.tv'}], 'filestype': 'directories', 'name': 'VTi https://vuplus-support.org', 'author': 'plnick@vuplus-support.org'}}, '/usr/share/enigma2/defaults/VuPlus/vti.info')]
installing package with index 0 and name VTi https://vuplus-support.org
currentAttributeIndex: 0
installing skin with index 0
currentAttributeIndex: 1
installing config with index 0
merging config: /usr/share/enigma2/defaults/VuPlus/  -  settings.vuplus
currentAttributeIndex: 1
installing config with index 1
currentAttributeIndex: 2
installing bouquetroot with index 0
installing favourites: /usr/share/enigma2/defaults/VuPlus/  -  bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
0 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/userbouquet.favourites.tv
resolve: -> /etc/enigma2/userbouquet.favourites.tv
resolve: resolve ${sysconfdir}/enigma2/bouquets.tv
resolve: -> /etc/enigma2/bouquets.tv
currentAttributeIndex: 2
installing bouquetroot with index 1
installing favourites: /usr/share/enigma2/defaults/VuPlus/  -  radio.tv
copy /usr/share/enigma2/defaults/VuPlus/radio.tv to /etc/enigma2/ failed!
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
1 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
currentAttributeIndex: 2
installing bouquetroot with index 2
currentAttributeIndex: 3
installing favourites with index 0
currentAttributeIndex: 4
installing package with index 0
currentAttributeIndex: 5
installing services with index 0
end of package reached
set status to DONE
installing done!
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioCPU 0 Unable to handle kernel paging request at virtual address 00000028, epc == e08058ec, ra == e0806034
ctl for device >Oops[#1]:
Cpu 0
$ 0   : 00000000 30008700 e08058ec 00000000
$ 4   : 00000000 30008701 000000b8 0040022c
$ 8   : 00000018 802436d8 00000000 00000000
$12   : 75786e10 7720a020 00000000 005e0000
$16   : 00000002 e080600c e0805fb4 00000002
$20   : e0805f70 00d87256 76dda558 01206f58
$24   : 00000000 e082e7a8                 
$28   : 866fa000 866fbdf0 01263b10 e0806034
Hi    : 00000000
Lo    : 00000198
epc   : e08058ec NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
    Tainted: P           O
ra    : e0806034 NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
Status: 30008703   KERNEL EXL IE
Cause : 00800008
BadVA : 00000028
PrId  : 0002a044 (Brcm4380)
Modules linked in: autofs4 rt5370sta(O) brcmfb(O) dvb_bcm7335(PO) procmk(O) ipv6
Process enigma2 (pid: 800, threadinfo=866fa000, task=88568510, tls=77cab490)
Stack : 00d87256 e07e6d50 00000000 00000022 00000000 866fbe20 00000002 e07e7598
     00000002 e07e6d10 e0c7f8ec e07e77a8 00000002 00000001 00000000 00000000
     00000000 00000000 e0c67f84 00000004 e0c67f84 00568e14 866fbf10 012639d0
     00d87256 e07e46c4 00511278 80010b24 00000001 00000001 87fb6e00 886a6160
     00568e14 801248a8 195c0109 0000000b 8848b020 800c6aa8 00568e14 00000004
     ...
Call Trace:
[<e08058ec>] NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
[<e0806034>] NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
[<e07e7598>] max9597_enable_output+0x9c/0x20c [dvb_bcm7335]
[<e07e46c4>] cleanup_procfs_stb_video+0x432c/0x55d0 [dvb_bcm7335]
[<801248a8>] proc_file_write+0x74/0xcc
[<8011fa18>] proc_reg_write+0x78/0xc0
[<800c5188>] vfs_write+0xa4/0x184
[<800c560c>] sys_write+0x54/0x98
[<8000e13c>] stack_done+0x20/0x40


Code: 27394f08  03200008  00002821 <8c850028> 27bdffe8  afb00010  afbf0014  10a00007  00808021

---[ end trace 68793a0a174f4547 ]---