# dmesg
......
DVB: registering new adapter (BCM7401).
registered vtuner vtuner0, minor 61
registered vtuner vtuner1, minor 60
enable tsm0
VIDEO0: stop decode
no decoder left in sync handling so disable xpt_sync
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=18
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
demodelator: stv090x dvb-s2    tuner: stv6110x
frontend core loaded
.....
root@dm800:/dev/dvb/adapter0# ls -la
drwxr-xr-x    2 root     root          400 Jan  1 01:00 .
drwxr-xr-x    3 root     root           60 Jan  1 01:00 ..
crw-rw----    1 root     video    212,   1 Jan  1 01:00 audio0
crw-rw----    1 root     video    212,   6 Jan  1 01:00 ca0
crw-rw----    1 root     video    212,  22 Jan  1 01:00 ca1
crw-rw----    1 root     video    212,  38 Jan  1 01:00 ca2
crw-rw----    1 root     video    212,  54 Jan  1 01:00 ca3
crw-rw----    1 root     video    212,   4 Jan  1 01:00 demux0
crw-rw----    1 root     video    212,  20 Jan  1 01:00 demux1
crw-rw----    1 root     video    212,  36 Jan  1 01:00 demux2
crw-rw----    1 root     video    212,  52 Jan  1 01:00 demux3
crw-rw----    1 root     video    212,   5 Jan  1 01:00 dvr0
crw-rw----    1 root     video    212,  21 Jan  1 01:00 dvr1
crw-rw----    1 root     video    212,  37 Jan  1 01:00 dvr2
crw-rw----    1 root     video    212,  53 Jan  1 01:00 dvr3
crw-rw----    1 root     video    212,   7 Jan  1 01:00 net0
crw-rw----    1 root     video    212,  23 Jan  1 01:00 net1
crw-rw----    1 root     video    212,  39 Jan  1 01:00 net2
crw-rw----    1 root     video    212,  55 Jan  1 01:00 net3
crw-rw----    1 root     video    212,   0 Jan  1 01:00 video0

отсутсвует frontend0
бб
======================
что имеется на 01.01.2012:
root@dm800:~# lsmod
    Tainted: P 
nfsd 114816 8 - Live 0xc02d5000
exportfs 4832 1 nfsd, Live 0xc0240000
ntfs 119072 0 - Live 0xc02b6000
des 20480 0 - Live 0xc0247000
pci 4704 0 - Live 0xc022c000
fuse 45328 0 - Live 0xc021f000
lnbp21 2240 0 - Live 0xc006f000
core 5568 0 - Live 0xc021c000
stv6110x 5776 1 core, Live 0xc00dd000
stv090x 64336 1 core, Live 0xc022f000
dvb_dummy_fe 4288 0 - Live 0xc0215000
dvb 2384 0 - Live 0xc006d000
bcm7401 3158064 2 - Live 0xc0448000
bcm4506 94368 1 bcm7401, Live 0xc00e0000
alps_bsbe1_c01a 19552 1 bcm7401, Live 0xc0074000
cxd1981 15616 1 bcm7401, Live 0xc0087000
tu1216 42032 1 bcm7401, Live 0xc0095000
alps_bsbe1 6208 1 bcm7401, Live 0xc0071000
stv0299 11824 1 alps_bsbe1, Live 0xc004f000
dvb_core 101872 6 core,dvb,bcm7401,cxd1981,tu1216,stv0299, Live 0xc00aa000
alps_bsbe2 44192 1 bcm7401, Live 0xc007b000
lnb_ctrl 6016 4 bcm4506,alps_bsbe1_c01a,alps_bsbe1,alps_bsbe2, Live 0xc006a000
cu1216mk3 8512 1 bcm7401, Live 0xc0066000
lcd 13248 1 - Live 0xc0061000
dreambox_keyboard 4208 0 - Live 0xc005e000
dreambox_rc2 6432 1 dreambox_keyboard, Live 0xc0053000
stb_core 18912 10 bcm7401,bcm4506,alps_bsbe1_c01a,cxd1981,alps_bsbe2,lnb_ctrl,cu1216mk3,lcd,dreambox_keyboard,dreambox_rc2, Live 0xc0058000
root@dm800:~#

что это значит?
#dmesg

[ Читать далее ]

Calibrating delay loop... 294.91 BogoMIPS (lpj=147456)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SATA: Primary Bus Master Status Register offset = b0520000 + 00000300 = b0520300
SATA: before init Primary Bus Master Status reg = 0x00000000.
SATA: after init Primary Bus Master Status reg = 0x00000020.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled
SyncLink PC Card driver $Revision: 4.34 $
SyncLink PC Card driver $Revision: 4.34 $, tty major#253
cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte
OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte
Broadcom BCM7401 P31 Ethernet Network Device v2.0 Jan  8 2012 12:44:00
SUNDRY revision = 74010021, have IP Hdr Opt=1
Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
Linux video capture interface: v2.00
videodev: "vivi" has no release callback. Please fix your driver for proper sysfs support, see Avoiding sysfs surprises [LWN.net]
Video Technology Magazine Virtual Video Capture Board (Load status: 0)
libata version 2.00 loaded.
sata_svw 0000:01:00.0: version 4.0
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
scsi0 : sata_svw
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F0000)
ata1.00: ATA-7, max UDMA/133, 78140160 sectors: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
  Vendor: ATA       Model: ST94813AS         Rev: 3.03
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
 - USB h/w setup mode <B>
 - USB power enable set for active HIGH mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480408
 brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
 - Resetting at b0480508
 brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
usb 1-2: new high speed USB device using brcm-ehci and address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
i2c-pca-isa: i/o base 0x000330. irq 10
i2c-pca-isa: I/O address 0x000330 is in use.
Driver for 1-wire Dallas network protocol.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver DS9490R
i2c-core: driver [ds2482] registered
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
ALSA device list:
  No soundcards found.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 136k freed
Warning: unable to open an initial console.
isa bounce pool size: 16 pages
  Vendor: JetFlash  Model: TS4GJFV30         Rev: 8.07
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdb: 7987200 512-byte hdwr sectors (4089 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 7987200 512-byte hdwr sectors (4089 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
 sdb: unknown partition table
sd 1:0:0:0: Attached scsi removable disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
stb_core: module license 'Proprietary' taints kernel.
input: dreambox remote control (native) as /class/input/input0
input: dreambox advanced remote control (native) as /class/input/input1
input: dreambox ir keyboard as /class/input/input2
input: dreambox ir mouse as /class/input/input3
enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313
kernMemSize : 150 MB
11:748015000 SMCA: controller reset timed out
11:762016000 SMCB: controller reset timed out
22:75023000 SMCB: cannot reset tpm
register adapter
i2c_adapter i2c-0: adapter [BCM Magnum] registered
i2c-dev: adapter [BCM Magnum] registered as minor 0
register adapter
i2c_adapter i2c-1: adapter [BCM Magnum] registered
i2c-dev: adapter [BCM Magnum] registered as minor 1
register adapter
i2c_adapter i2c-2: adapter [BCM Magnum] registered
i2c-dev: adapter [BCM Magnum] registered as minor 2
register adapter
i2c_adapter i2c-3: adapter [BCM Magnum] registered
i2c-dev: adapter [BCM Magnum] registered as minor 3
register adapter
i2c_adapter i2c-4: adapter [BCM Magnum] registered
i2c-dev: adapter [BCM Magnum] registered as minor 4
input: dreambox front panel as /class/input/input4
HDMI: no device attached
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: hotplug handler!
HDMI: no device attached
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=24
set fb to 2(0)
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
enable mad
VIDEO0: set fallback framerate to 60000
VIDEO0: set progressive override mode to 1
VIDEO0: set streamtype!
set MPEG2
sw rave disabled!
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0 got pts failed !!!! (ret 0)
set ac3 to downmix
set aac to downmix
VIDEO0: stop decode
no decoder left in sync handling so disable xpt_sync
init ALSA!
DVB: registering new adapter (BCM7401)
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=18
bcm_video_analog_port_setup (fmt=6)
SET FORMAT: display[1], format=6
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
4019693 ms:
62 ms: 28 Starting /etc/rcS.d/S02sysfs...
16 ms: =s
296 ms: 31 Starting /etc/rcS.d/S03udev...
16 ms: =f
17 ms: 34 Starting /etc/rcS.d/S04bootup...
2 ms: 10
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
194 ms: 12
Adding 514072k swap on /dev/sda2.  Priority:-1 extents:1 across:514072k
39 ms: 14
28 ms: 15
41 ms: 16
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x10000000 action 0x0
ata1.00: tag 0 cmd 0xef Emask 0x1 stat 0x51 err 0x4 (device error)
ata1: EH complete
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
195 ms: 17
34 ms: 18
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
27 ms: 19
6 ms: 20
17 ms: 21
2 ms: 22
3 ms: 23
848 ms: 24
17 ms: 25
17 ms: =s
59 ms: 37 Starting /etc/rcS.d/S10tpmd...
16 ms: =s
61 ms: 40 Starting /etc/rcS.d/S20modutils.sh...
18 ms: =s
64 ms: 43 Starting /etc/rcS.d/S38devpts.sh...
43 ms: =s
7386 ms: 46 Starting /etc/rcS.d/S40networking...
17 ms: =s
8 ms: 49 Starting /etc/rcS.d/S98configure...
Linux video codec intermediate layer: v0.2
i2c-core: driver [tveeprom] registered
i2c-core: driver [tuner] registered
socket_init >
socket_init < 0
bcmfb: enable manual blit
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
84029 ms: =f
32 ms: 50
359 ms: 50
73 ms: 50
39 ms: 50
1395 ms: 50
630 ms: 52
1637 ms: 53
444 ms: 56
18 ms: 57
4 ms: 57
4 ms: 57
391 ms: 57
3 ms: 57
148 ms: 57
630 ms: 58
356 ms: 58
29 ms: 59
4 ms: 59
3 ms: 59
23 ms: 59
36 ms: 59
2322 ms: 59
4 ms: 63
27 ms: 63
38 ms: 63
59 ms: 63
92 ms: 63
4 ms: 63
7 ms: 63
18 ms: 63
4109 ms: 63
4 ms: 69
368 ms: 69
4 ms: 70
212 ms: 70
6 ms: 70
4 ms: 70
11 ms: 70
22 ms: 70
31 ms: 70
5 ms: 71
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
678 ms: 71
137 ms: 72
set current avs auto aspect to 4:3
disable wss on display 0
disable wss on display 1
set sb to 3(2)
set current avs auto aspect to 4:3
disable wss on display 0
disable wss on display 1
set sb to 3(2)
disable wss on display 0
set wss 8 on display 1
set input to 0
set fb to 2(0)
set current avs auto aspect to 4:3
disable wss on display 0
set wss 8 on display 1
set sb to 3(2)
set ac3 to downmix
Unhandled kernel unaligned access[#1]:

Cpu 0
$ 0   : 00000000 2cf70001 80320578 c05015e0
$ 4   : 000000f7 00000000 00000010 8813ce80
$ 8   : 88e67e31 00000000 80395a00 00000004
$12   : 00000031 00002000 fbad2c04 fbad2c84
$16   : 000000f7 c06f3458 ffffffff 00000001
$20   : 2b4ee4c4 005c90d8 01168490 00000000
$24   : 00000001 c0063dac                 
$28   : 88e66000 88e67df8 005c90d8 c0440f80
Hi    : 00000000
Lo    : 00000000
epc   : 80320578 mutex_lock+0x0/0x34     Tainted: P     
ra    : c0440f80 bcm_mpeg_exit+0x988/0x169c [bcm7401]
Status: 10008403    KERNEL EXL IE
Cause : 00800010
BadVA : 000000f7
PrId  : 00020000
Modules linked in: lnbp21 dvb_dummy_fe dvb_pll bcm3510 dvb frontend_platform socket tuner video_buf_dvb tveeprom videocodec stv6110x stv090x nls_iso8859_1 nls_cp437 bcm7401 cxd1981 cu1216mk3 tu1216 alps_bsbe2 alps_bsbe1 stv0299 dvb_core bcm4506 alps_bsbe1_c01a lnb_ctrl lcd dreambox_keyboard dreambox_rc2 stb_core
Process enigma2 (pid: 954, threadinfo=88e66000, task=806f2098)
Stack : 80410000 00000000 2cf70000 8005e93c 00000060 00000000 00000001 2cf70000
        88e67f10 c0063e64 0002cf70 00010000 88fad820 00000802 863d0031 80061104
        00000000 87a04dc0 810b1ca0 00000000 88e67f30 2cf70000 806f2098 88fad820
        863d7224 88fad854 00000001 88e67f30 2cf70000 8000ebb4 00000000 80062f58
        386d4405 13ab6680 386d4405 13ab6680 863d7530 00000000 00000000 00030002
        ...
Call Trace:
[<80320578>] mutex_lock+0x0/0x34


Code: 8fb00024  03e00008  27bd0040 <c0850000> 24a3ffff  e0830000  1060fffc  00000000  24a3ffff


root@dm800:~# lsmod
    Tainted: P 
core 5568 0 - Live 0xc0203000
fuse 45040 0 - Live 0xc0231000
lnbp21 2496 0 - Live 0xc022b000
dvb_dummy_fe 4320 0 - Live 0xc0228000
dvb_pll 10096 0 - Live 0xc022d000
bcm3510 11408 0 - Live 0xc0213000
dvb 2448 0 - Live 0xc0211000
frontend_platform 1056 0 [permanent], Live 0xc020f000
socket 4016 0 - Live 0xc00ca000
tuner 66400 0 - Live 0xc023f000
video_buf_dvb 4944 0 - Live 0xc0206000
tveeprom 14448 0 - Live 0xc020a000
videocodec 8832 0 - Live 0xc0070000
stv6110x 5952 1 core, Live 0xc0200000
stv090x 64560 1 core, Live 0xc0217000
nls_iso8859_1 3712 1 - Live 0xc0092000
nls_cp437 5344 1 - Live 0xc0086000
bcm7401 2904128 5 - Live 0xc0434000
cxd1981 14272 1 bcm7401, Live 0xc0089000
cu1216mk3 8512 1 bcm7401, Live 0xc007e000
tu1216 42032 1 bcm7401, Live 0xc00b6000
alps_bsbe2 44000 1 bcm7401, Live 0xc00aa000
alps_bsbe1 6208 1 bcm7401, Live 0xc0074000
stv0299 11824 1 alps_bsbe1, Live 0xc004f000
dvb_core 99280 6 core,dvb,video_buf_dvb,bcm7401,tu1216,stv0299, Live 0xc00cc000
bcm4506 78560 1 bcm7401, Live 0xc0095000
alps_bsbe1_c01a 17056 1 bcm7401, Live 0xc0078000
lnb_ctrl 6016 4 alps_bsbe2,alps_bsbe1,bcm4506,alps_bsbe1_c01a, Live 0xc005e000
lcd 13248 2 - Live 0xc0059000
dreambox_keyboard 4208 0 - Live 0xc0056000
dreambox_rc2 6432 1 dreambox_keyboard, Live 0xc0053000
stb_core 50192 10 bcm7401,cxd1981,cu1216mk3,alps_bsbe2,bcm4506,alps_bsbe1_c01a,lnb_ctrl,lcd,dreambox_keyboard,dreambox_rc2, Live 0xc0062000
===
===
заглючила enigma
понятно)))ерунда это все)
===
===
Unhandled kernel unaligned access[#1]:
Cpu 0
$ 0   : 00000000 2cf70001 80320578 c05015e0
$ 4   : 000000f7 00000000 00000010 875b4e80
$ 8   : 871d9e31 00000000 80395a00 00000004
$12   : 00000031 00002000 fbad2c04 fbad2c84
$16   : 000000f7 c06f3458 ffffffff 00000001
$20   : 2b4ee4c4 005c90d8 011912d0 00000000
$24   : 00000001 c0063dac                 
$28   : 871d8000 871d9df8 005c90d8 c0440f80
Hi    : 00000000
Lo    : 00000000
epc   : 80320578 mutex_lock+0x0/0x34     Tainted: P     
ra    : c0440f80 bcm_mpeg_exit+0x988/0x169c [bcm7401]
Status: 10008403    KERNEL EXL IE
Cause : 00800010
BadVA : 000000f7
PrId  : 00020000
Modules linked in: lnbp21 dvb_dummy_fe dvb_pll bcm3510 dvb frontend_platform socket tuner video_buf_dvb tveeprom videocodec fuse core stv6110x stv090x nls_iso8859_1 nls_cp437 bcm7401 cxd1981 cu1216mk3 tu1216 alps_bsbe2 alps_bsbe1 stv0299 dvb_core bcm4506 alps_bsbe1_c01a lnb_ctrl lcd dreambox_keyboard dreambox_rc2 stb_core
Process enigma2 (pid: 955, threadinfo=871d8000, task=879f9158)
Stack : 80410000 00000000 2cf70000 8005e93c 871d8000 871d9e30 00000001 2cf70000
        871d9f10 c0063e64 0002cf70 00010000 803f6960 00000802 85670031 80061104
        00000000 8564adc0 810a7dc0 00000000 871d9f30 2cf70000 879f9158 803f6960
        86108860 803f6994 00000001 871d9f30 2cf70000 8000ebb4 00000000 80062f58
        386d4402 30479e80 386d4402 30479e80 85671530 00000000 00000000 00030002
        ...
Call Trace:
[<80320578>] mutex_lock+0x0/0x34


Code: 8fb00024  03e00008  27bd0040 <c0850000> 24a3ffff  e0830000  1060fffc  00000000  24a3ffff
Unhandled kernel unaligned access[#2]:
Cpu 0
$ 0   : 00000000 10008400 00000007 ffffffff
$ 4   : 00000000 8491a000 00000000 00000c00
$ 8   : 00000000 00000001 80074210 fffffff8
$12   : 00000022 2ab22234 2aad4f00 0d696910
$16   : 8491a000 868b3e94 8762a480 00000000
$20   : 00000c00 8491a000 88338400 00000c00
$24   : 00000002 2abda3d4                 
$28   : 868b2000 868b3e30 868b3e94 c006322c
Hi    : 00000000
Lo    : 00000000
epc   : c0441e08 bcm_mpeg_setup_digital_window+0x174/0x22c [bcm7401]     Tainted: P     
ra    : c006322c stb_proc_remove_frontend_child+0xc0/0x120 [stb_core]
Status: 10008403    KERNEL EXL IE
Cause : 00800010
BadVA : 0000000f
PrId  : 00020000
Modules linked in: lnbp21 dvb_dummy_fe dvb_pll bcm3510 dvb frontend_platform socket tuner video_buf_dvb tveeprom videocodec fuse core stv6110x stv090x nls_iso8859_1 nls_cp437 bcm7401 cxd1981 cu1216mk3 tu1216 alps_bsbe2 alps_bsbe1 stv0299 dvb_core bcm4506 alps_bsbe1_c01a lnb_ctrl lcd dreambox_keyboard dreambox_rc2 stb_core
Process cat (pid: 1057, threadinfo=868b2000, task=883570f8)
Stack : 2abda000 00000000 868b3f10 00000000 00010000 2ac6d000 8491a000 c006322c
        88338400 2aac6358 7f857c78 80054784 868b3f10 00000000 00010000 2ac6d000
        2aac6358 800afb34 2aac6358 80071168 2aaca000 84d543c8 868b3e90 8762a480
        00000000 00000000 00000000 00000c00 8579d520 2ac6d000 868b3f10 00000004
        2aac6358 00000000 00010000 2aac6358 7f857c78 80074078 00010000 00010000
        ...
Call Trace:
[<c0441e08>] bcm_mpeg_setup_digital_window+0x174/0x22c [bcm7401]
[<80054784>] __get_free_pages+0x3c/0x88
[<800afb34>] proc_file_read+0x254/0x344
[<80074078>] vfs_read+0xb4/0x1a0
[<8007425c>] sys_read+0x4c/0xa4
[<8000d6cc>] stack_done+0x20/0x3c


Code: 24820002  00021080  00621021 <8c440008> 3c02c04d  27a50010  24427d10  0040f809  27a60014
root@dm800:~#
без stv0299 ничего нет! так то!

Tuxbox TX980L HD PVR –спутниковый ресивер с возможностями просмотра каналов В фоматах MPEG2 и в MPEG4 – HDTV каналов высокой четкости.
Основное достоинство Tuxbox 980 HD - возможность просмотра закрытых каналов при помощи интернета, это так называемый кардш@рик.
Компания Tuxbox расположена на Тайване и основной сферой деятельности является производство микро чипов и радиодеталей. Попробовав себя в сфере разработки и доработки спутниковых ресиверов, компания показала свои возможности на ресиверах младшего модельного ряда Tuxbox TX 907 и Tuxbox TX 908, которые продаются на рынке уже более трех лет и снискали себе заслуженную популярность среди пользователей.
Ресивер Tuxbox 980 HD произведен на Тайване на базе широко известного ресивера Dreambox DM800 HD PVR. Dreambox 800 HD разработан в Германии и производится в Китае и соответственно делается из деталей произведенных в Китае. Так как в Китае ввоз деталей зарубежных производителей облагается большими пошлинами, качество китайских конденсаторов и микросхем достаточно низкое и среди пользователей dreambox 800 возникает большое количество нареканий на качество ресивера.
В связи с этим компания Tuxbox, взяв за основу ресивер Dreambox 800, и доработав его и оснастив деталями собственного производства, которые экспортируются уже в течении 20 лет на рынки Японии, Европы и Америки. Доработки коснулись следующих элементов ресивера: система охлаждения ресивера была доработана, был установлен радиатор на процессор, а так же был установлен куллер для охлаждения жесткого диска, для которого внутри ресивера имеется место.
В ресиверах Dreambox 800 имеются проблемы с блоком питания в местах с нестабильным электропитанием, так как DM 800 разрабатывался в основном для Европы, где проблем с перепадом напряжения в сети нет. Компания Tuxbox изменила полностью блок питания и в модели Tuxbox 980HD такой проблемы больше нет.
Dreambox 800HD известен плохой чуствительностью на каналах HDTV высокой четкости при низком уровне сигнала (сравнения проводились с Kathrein UFS910 ,обычные каналы в MPEG2 при низком уровне сигнала прописываются на обоих ресиверах без проблем, а каналы HD на Kathrein UFS910 прописались, а на DM800 нет). Компания Tuxbox внесла несколько доработок,после чего чуствительность Tuxbox TX 980 HD стала на порядок лучше dreambox 800.
Компания Tuxbox остановилась не только на доработках железа, но и доработала программное обеспечение, которое всегда можно скачать на сайте upload.metabox.ru