СPU 01
BCM74390011
PRID07251111
v1.19
RR:00000003
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FIX
AVS start:NO
DDR0: *@ ffe0c7c8 <= ffe0c7c8 MEMSYS-0 @ f1100000 OK
DDR1: -
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0704e3b0
_ebss  0704fc18
_end   0704fc38
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0704e3b0 to 0704fc18 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/
  ,'/___, BOLT v1.19 v1.19 LOCAL BUILD
.'__  ,'  (2017-01-17 15:47:05 doolgun@ubuntu)
   /,'    Copyright (C) 2017 Broadcom
  /'

Board: SF4008_EMMC_DDR4_NOAVS
SYS_CTRL: product=72511, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822080e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) memsys_1_disable(0x00008000) moca_disable(0x80000000) r                                                                                                                               v9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000461: moca2_disable(0x00000001) pcie1_disable(0x00000040) rfm_disable(0x00000020) sata1_disable(0x00000400)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 N/A
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 23 possible causes)
CS0: SFDP SPI, 8MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 1
AVS: park check
AVS: temperature monitoring enabled
AVS: V=0.993V, T=+28.719C (no AVS FW)
USB otp=00000040
usb: resetting device on bus 1 hub 1 port 1
USB: New high speed device connected to bus 1 hub 1 port 1
USB device matching <USB> not found!
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
Reading 3390416 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (eduard@ubuntu-16) (gcc version 6.2.0 (GCC) ) #1 SMP Mon Se                                                                                                                               p 25 04:47:51 EEST 2017
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: SF4008_EMMC_DDR4_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000959804
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296868K/1048576K available (6728K kernel code, 213K rwdata, 2100K rodata                                                                                                                               , 296K init, 190K bss, 735324K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08a7720   (8830 kB)
      .init : 0xc08a8000 - 0xc08f2000   ( 296 kB)
      .data : 0xc08f2000 - 0xc09275d0   ( 214 kB)
       .bss : 0xc092a000 - 0xc0959804   ( 191 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, ma                                                                                                                               x_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00                                                                                                                                BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112                                                                                                                               60446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a                                                                                                                                16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platfor                                                                                                                               m mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /media/myhome/openpli-oe-core/build/tmp/work-shared/sf4008/kernel-source/dr                                                                                                                               ivers/net/usb/hso.c: Option Wireless
ata1: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver hso
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x000                                                                                                                               10090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ata2: SATA link down (SStatus 0 SControl 300)
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
usb 4-1: new high-speed USB device number 2 using ehci-brcm
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:08 U                                                                                                                               TC (
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
 mmcblk0: p1 p2 p3 p4 p5
EXT4-fs (mmcblk0p4): recovery complete
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 296K (c08a8000 - c08f2000)
INIT: version 2.88 booting
Adding 524264k swap on /dev/mmcblk0p5.  Priority:-1 extents:1 across:524264k SSF                                                                                                                               S
EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
/dev/dvb/adapter0/video0: No such file or directory
random: dd urandom read with 22 bits of entropy available
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1735: No soundcards found...
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.dirty_ratio = 60
Starting  platform-utilDVB: registering new adapter (sf4008)
platform sf4008.0: DVB: registering adapter 0 frontend 0 (Si21662)...
platform sf4008.0: DVB: registering adapter 0 frontend 1 (Si21662)...
input: dreambox remote control (native) as /devices/virtual/input/input0
random: nonblocking pool is initialized
.
INIT: Entering runlevel: 3
Configuring network interfaces... f0b00000.etherne:01: Broadcom BCM7439 (2) PHY                                                                                                                                revision: 0x10, patch: 1
bcmgenet f0b00000.ethernet: configuring instance for internal PHY
udhcpc: option -h NAME is deprecated, use -x hostname:NAME
udhcpc (v1.24.1) started
Sending discover...
bcmgenet f0b00000.ethernet eth0: Link is Down
Sending discover...
Sending discover...
No lease, forking to background
done.
Starting system message bus: dbus.
Starting Dropbear SSH server: NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
dropbear.
Starting rpcbind daemon...done.
Mounting remote filesystems...
starting statd: done
starting Busybox Periodic Command Scheduler: crond... done.
crond[1125]: crond (busybox 1.24.1) started, log level 8

Starting internet superserver: inetd.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
ENIGMA_DEBUG_LVL=3
[MAIN] executing main
5

[ Гостям не разрешен просмотр вложений ]