17 декабря | 2018г. | 03:35:26

АвторТема: OCTAGON SF4008 4K UHD  (Прочитано 139124 раз)

0 Пользователей и 1 Гость смотрят эту тему.

Оффлайн opja

  • Младший Джедай
  • **
  • Сообщений: 61
  • Поблагодарили: 50
OCTAGON SF4008 4K UHD
« Ответ #435: 08 января | 2018г. | 20:17:12 »

распаковали переименовали в update.bin и шьете если так хотите пробнуть
Не помогло, Booting...


  • OCTAGON SF4008 4K UHD
OpenATV-6.3

Оффлайн romansat

  • Великий Джедай
  • ****
  • Сообщений: 589
  • Поблагодарили: 616
OCTAGON SF4008 4K UHD
« Ответ #436: 08 января | 2018г. | 20:27:45 »
nikolasi,

На oATV 6.2 не прокатило.
На oATV 6.1 оказывается этот файл уже присутствует в сегодняшнем имидже.Вчера еще небыло.
Но также не прокатило - booting...
Сейчас попробую установить онлайн со старого бэкапа 6.1.
Может подхватит.

P.S. онлайн со старого бэкапа 6.1 не прокатило.
P.S. по USB со старого бэкапа 6.1 также не прокатило.

Сейчас пробую установить имидж с новым update.bin в мультибут.
P.S. В мультибут тоже не идет.
  • Dreambox DM920 DVB-S2X Multistream Dual Tuner | Octagon SF4008 Triple 4K UHD | Vu+ Uno 4K | Vu+Solo2 | Openbox SX6 HDPVR | DreamBox 7020HD | Openbox PrismCube Ruby | Open SX1 HD и др.

Оффлайн opja

  • Младший Джедай
  • **
  • Сообщений: 61
  • Поблагодарили: 50
OCTAGON SF4008 4K UHD
« Ответ #437: 08 января | 2018г. | 23:41:54 »
SF4008 Update.bin

- fix flash issue

from tomorrow in images
  • OCTAGON SF4008 4K UHD
OpenATV-6.3

Оффлайн nikolasi

  • Совет Джедаев
  • ****
  • Сообщений: 3756
  • Поблагодарили: 14232
OCTAGON SF4008 4K UHD
« Ответ #438: 09 января | 2018г. | 12:51:57 »
ну я собираю сейчас с новым драйвером и новым бинаром.если нужно пробните пойдет нет
пс имидж тут
  • et11000, formuler4turbo
Arca costruita da un dilettante, professionisti  creato il Titanic ...;)
Z392888841330 U164774080471 (visa 4149497842976013)
R177825323607 яндекс - 410013614905738

Оффлайн opja

  • Младший Джедай
  • **
  • Сообщений: 61
  • Поблагодарили: 50
OCTAGON SF4008 4K UHD
« Ответ #439: 09 января | 2018г. | 14:13:23 »
P.S. Но что самое интересное.
Имидж OpenEight 6.5 имеет тот же update.bin,но работает с новыми драйверами и обновляется.
пробните пойдет нет
И также на АТВ 6.1 и 6.2 за сегодняшнее число всюду Booting
  • OCTAGON SF4008 4K UHD
OpenATV-6.3

Оффлайн biot21

  • Падаван
  • *
  • Сообщений: 10
  • Поблагодарили: 1
OCTAGON SF4008 4K UHD
« Ответ #440: 09 января | 2018г. | 17:12:29 »
openpli-booting openatv 6.2 09.01.2018 нормально pure2 6.1 08.01.2018 нормально

Оффлайн romansat

  • Великий Джедай
  • ****
  • Сообщений: 589
  • Поблагодарили: 616
OCTAGON SF4008 4K UHD
« Ответ #441: 09 января | 2018г. | 19:42:51 »
nikolasi,

Твой имидж не устанавливается.
После перезагрузки вечный booting...
Устанавливал поверх OpenEight 6.5.
Сегодняшний имидж oATV 6.2 устанавливается.

Добавлено  10 января | 2018г. | 00:21:11
Вот лог загрузки имиджа oATV 6.2 через UART от сегодня,9.01.18.
Поскольку сегодня вышли исправления update.bin ,всё происходит нормально.
В любом случае очень большая благодарность Ednaz,  за инструкцию.

Спойлер   :
CPU 01
BCM74390011
PRID07251111
v1.19
RR:00000003
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2                                                                                                                                                             a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FIX
AVS start:status=000000ff
STB: Current voltage=00000395(917)
 temperature=00006c61(27745)
 PV=00000354(852)
 MV=00000395(917)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: *@ ffe0c7c8 <= ffe0c7c8 MEMSYS-0 @ f1100000 OK
DDR1: -
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0704e420
_ebss  0704fc88
_end   0704fca8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0704e420 to 0704fc88 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/
  ,'/___, BOLT v1.19 v1.19 LOCAL BUILD
.'__  ,'  (2016-10-14 22:06:19 doolgun@ubuntu)
   /,'    Copyright (C) 2016 Broadcom
  /'

Board: SF4008_EMMC_DDR4
SYS_CTRL: product=72511, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822080e0: en_cr(0x00000060) en_testport(0x00000080) macrovi                                                                                                                                                             sion_disable(0x02000000) memsys_1_disable(0x00008000) moca_disable(0x80000000) r                                                                                                                                                             v9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000461: moca2_disable(0x00000001) pcie1_disable(0x0000004                                                                                                                                                             0) rfm_disable(0x00000020) sata1_disable(0x00000400)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 N/A
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 23 possible causes)
CS0: SFDP SPI, 8MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 1
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.917V, T=+28.719C, PV=0.852V, MV=0.917V, FW=30333278 [0.3.2.x]
USB otp=00000040
Board version 0.92
HCS16SM18T Init
HCS16SM18T Reset
usb: resetting device on bus 1 hub 1 port 1
USB: New high speed device connected to bus 1 hub 1 port 1
Power Btn Init
LED Init
HDD Power Init
USB device matching <USB> not found!
[ssbl/main/linux_dvb_7439.c::linux_dvb_usb_upgrade(653)] LINUX_DVB_DIR_PATH: sf4                                                                                                                                                             008
checking usbmass for upgrade
no upgrade found
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
Reading 3478360 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #2 SMP Sun Dec                                                                                                                                                              31 19:35:05 CET 2017
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: SF4008_EMMC_DDR4
moving dtb from 0x0000000007628000 to 0x00000000009a026c
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296584K/1048576K available (6945K kernel code, 220K rwdata, 2144K rodata                                                                                                                                                             , 300K init, 200K bss, 735608K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08e8ae0   (9091 kB)
      .init : 0xc08e9000 - 0xc0934000   ( 300 kB)
      .data : 0xc0934000 - 0xc096b2e0   ( 221 kB)
       .bss : 0xc096e000 - 0xc09a026c   ( 201 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, ma                                                                                                                                                             x_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00                                                                                                                                                              BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112                                                                                                                                                             60446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a                                                                                                                                                              16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platfor                                                                                                                                                             m mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /home/oe1/atv62/build-enviroment/builds/openatv/release/sf4008/tmp/work-sha                                                                                                                                                             red/sf4008/kernel-source/drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x000                                                                                                                                                             10090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO                                                                                                                                                              or FUA
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ata2: SATA link down (SStatus 0 SControl 300)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
usb 4-1: new high-speed USB device number 2 using ehci-brcm
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:09 U                                                                                                                                                             TC (9)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
 mmcblk0: p1 p2 p3 p4
EXT4-fs (mmcblk0p4): recovery complete
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 300K (c08e9000 - c0934000)
INIT: version 2.88 booting
Starting fake hwclock: loading system time.
Tue Jan  9 20:15:33 UTC 2018
swapon: cannot open /dev/mmcblk0p5: No such file or directory
find: /media/hdd: No such file or directory
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
linuxtv: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
SGI XFS with security attributes, no debug enabled
/dev/dvb/adapter0/video0: No such file or directory
swapon: cannot open /dev/mmcblk0p5: No such file or direEXT4-fs (mmcblk0p4): re-                                                                                                                                                             mounted. Opts: data=ordered
ctory
random: dd urandom read with 94 bits of entropy available
/etc/rcS.d/S39alsa-state: line 10: /etc/init.d/functions: No such file or direct                                                                                                                                                             ory
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
Starting  platform-utilDVB: registering new adapter (sf4008)
platform sf4008.0: DVB: registering adapter 0 frontend 0 (Si21662)...
platform sf4008.0: DVB: registering adapter 0 frontend 1 (Si21662)...
random: nonblocking pool is initialized
input: dreambox remote control (native) as /devices/virtual/input/input0
.
Starting stb hwclock: loading system time.
INIT: Entering runlevel: 3
Tue Jan  9 20:15:39 UTC 2018
/etc/rc3.d/S02dbus-1: line 20: /etc/init.d/functions: No such file or directory
Starting Dropbear SSH server: dropbear.
Configuring network interfaces... f0b00000.etherne:01: Broadcom BCM7439 (2) PHY                                                                                                                                                              revision: 0x10, patch: 1
bcmgenet f0b00000.ethernet: configuring instance for internal PHY
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udhcpc: started, v1.27.2
udhcpc: sending discover
bcmgenet f0b00000.ethernet eth0: Link is Down
udhcpc: sending discover
bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.1.109
udhcpc: lease of 192.168.1.109 obtained, lease time 86400
/etc/udhcpc.d/50default: Adding DNS 192.168.1.1
done.
/etc/rc3.d/S12rpcbind: line 20: /etc/init.d/functions: No such file or directory
Fuse filesystem already available.
Mounting fuse control filesystem.
/etc/rc3.d/S13nfsserver: line 18: /etc/init.d/functions: No such file or directo                                                                                                                                                             ry
Mounting remote filesystems...
Starting automount: automount: program is already running.
done.
/etc/rc3.d/S19nfscommon: line 20: /etc/init.d/functions: No such file or directo                                                                                                                                                             ry
Starting internet superserver: inetd.
astra[1291]: Starting Astra SM 0.2
Starting Samba: smbd nmbd wsdd.
Starting Shell In A Box server: shellinabox.
Starting syslogd/klogd: done
Starting telnet server: telnetd.
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...fail!
* starting FTP Server: vsftpd... done.
/etc/rc3.d/S90crond: line 22: /etc/init.d/functions: No such file or directory
  Sorry, no swap drive found
/etc/rc3.d/S99rc.local: line 14: /etc/init.d/functions: No such file or director                                                                                                                                                             y
killall: showiframe: no process killed
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.min_free_kbytes = 8192
vm.dirty_ratio = 60
vm.swappiness = 30
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
enigma2 is the main pvr application... adjust oom score!

А вот почему не устанавливается имидж от nikolasi, .
Вернее он устанавливается как видно из лога,перезагружается,но потом,во время загрузки вечный booting... на platform-util

Спойлер   :
CPU 01
BCM74390011
PRID07251111
v1.19
RR:00000003
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FIX
AVS start:status=000000ff
STB: Current voltage=0000038d(909)
 temperature=00009bf0(39920)
 PV=0000034d(845)
 MV=0000038c(908)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: *@ ffe0c7c8 <= ffe0c7c8 MEMSYS-0 @ f1100000 OK
DDR1: -
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0704e420
_ebss  0704fc88
_end   0704fca8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0704e420 to 0704fc88 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/
  ,'/___, BOLT v1.19 v1.19 LOCAL BUILD
.'__  ,'  (2016-10-14 22:06:19 doolgun@ubuntu)
   /,'    Copyright (C) 2016 Broadcom
  /'

Board: SF4008_EMMC_DDR4
SYS_CTRL: product=72511, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822080e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) memsys_1_disable(0x00008000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000461: moca2_disable(0x00000001) pcie1_disable(0x00000040) rfm_disable(0x00000020) sata1_disable(0x00000400)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 N/A
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 23 possible causes)
CS0: SFDP SPI, 8MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 1
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.906V, T=+41.381C, PV=0.845V, MV=0.908V, FW=30333278 [0.3.2.x]
USB otp=00000040
Board version 0.92
HCS16SM18T Init
HCS16SM18T Reset
usb: resetting device on bus 1 hub 1 port 1
USB: New high speed device connected to bus 1 hub 1 port 1
usb: resetting device on bus 1 hub 2 port 1
USB: New high speed device connected to bus 1 hub 2 port 1
usb: found Mass-Storage Device 090c:6200
USBMASS: Unit 0 connected
Power Btn Init
LED Init
HDD Power Init
[ssbl/main/linux_dvb_7439.c::linux_dvb_usb_upgrade(653)] LINUX_DVB_DIR_PATH: sf4008
checking usbmass for upgrade
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/update.bin: File found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/force: File not found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/noforce: File found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/rootfs.tar.bz2: File found
force:0 - noforce:1
[linux_dvb_upgrade:551] disk_number: 0
power button pressed
Reading usbdisk0:sf4008/bolt.bin: Failed.: File not found
Reading usbdisk0:sf4008/splash.bin: Failed.: File not found
Reading usbdisk0:sf4008/update.bin: .
Done. 7955168 bytes read
Programming...done. 7955168 bytes written
Reading usbdisk0:sf4008/kernel.bin: .
Done. 3401016 bytes read
Programming...done. 3401016 bytes written
Loader:zimg Filesys:raw Dev:emmcflash0.update File:(null) Options:(null)
Reading 7955168 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit boot...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.28-1.8 (doolgun@ubuntu) (gcc version 4.8.5 (Broadcom stbgcc-4.8-1.5) ) #9 SMP Wed Sep 21 11:15:09 KST 2016
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: SF4008_EMMC_DDR4
[    0.000000] moving dtb from 0x0000000007628000 to 0x0000000000bae284
[    0.000000] bmem: Reserved 768 MiB at 0x0000000010000000
[    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] MCP: Enabling write pairing
[    0.000000] PERCPU: Embedded 8 pages/cpu @ce7c8000 s8704 r8192 d15872 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261632
[    0.000000] Kernel command line:
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 225152K/1048576K available (5616K kernel code, 286K rwdata, 1768K rodata, 4020K init, 226K bss, 807040K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc073e38c   (7385 kB)
[    0.000000]       .init : 0xc073f000 - 0xc0b2c200   (4021 kB)
[    0.000000]       .data : 0xc0b2e000 - 0xc0b75a70   ( 287 kB)
[    0.000000]        .bss : 0xc0b75a78 - 0xc0bae284   ( 227 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
[    0.000009] Switching to timer-based delay loop
[    0.000269] Console: colour dummy device 80x30
[    0.000290] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000300] pid_max: default: 32768 minimum: 301
[    0.000390] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000394] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.005788] CPU: Testing write buffer coherency: ok
[    0.006008] CPU0: update cpu_power 1024
[    0.006015] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.006071] Setting up static identity map for 0x558918 - 0x558970
[    0.008653] CPU1: Booted secondary processor
[    0.008674] CPU1: update cpu_power 1024
[    0.008676] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.008773] Brought up 2 CPUs
[    0.008784] SMP: Total of 2 processors activated.
[    0.008788] CPU: All CPU(s) started in SVC mode.
[    0.009115] devtmpfs: initialized
[    0.012368] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.013416] regulator-dummy: no parameters
[    0.013590] NET: Registered protocol family 16
[    0.014161] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.014908] cpuidle: using governor ladder
[    0.014915] cpuidle: using governor menu
[    0.017134] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
[    0.017280] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[    0.020495] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
[    0.020637] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
[    0.020787] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
[    0.020927] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
[    0.021061] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
[    0.021214] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
[    0.021346] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
[    0.021486] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
[    0.021618] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
[    0.021748] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
[    0.021883] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
[    0.022010] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
[    0.022135] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
[    0.022272] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
[    0.022785] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
[    0.023211] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.023217] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.023279] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
[    0.123697] brcm-pci f0460000.pcie: link down
[    0.135344] bio: create slab <bio-0> at 0
[    0.135916] SCSI subsystem initialized
[    0.136487] usbcore: registered new interface driver usbfs
[    0.136574] usbcore: registered new interface driver hub
[    0.136664] usbcore: registered new device driver usb
[    0.136830] Linux video capture interface: v2.00
[    0.136925] pps_core: LinuxPPS API ver. 1 registered
[    0.136929] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.136981] PTP clock support registered
[    0.137672] Advanced Linux Sound Architecture Driver Initialized.
[    0.138158] Switched to clocksource arch_sys_counter
[    0.146948] thermal thermal_zone0: failed to read out thermal zone 0
[    0.147031] NET: Registered protocol family 2
[    0.147382] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.147396] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.147418] TCP: Hash tables configured (established 2048 bind 2048)
[    0.147446] TCP: reno registered
[    0.147453] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.147464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.147564] NET: Registered protocol family 1
[    0.147759] RPC: Registered named UNIX socket transport module.
[    0.147763] RPC: Registered udp transport module.
[    0.147766] RPC: Registered tcp transport module.
[    0.147769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.241896] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[    0.243071] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.243772] bounce pool size: 64 pages
[    0.244077] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.244268] NFS: Registering the id_resolver key type
[    0.244293] Key type id_resolver registered
[    0.244297] Key type id_legacy registered
[    0.244306] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.244320] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.244395] fuse init (API version 7.22)
[    0.244779] msgmni has been set to 471
[    0.245272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.245280] io scheduler noop registered
[    0.245284] io scheduler deadline registered
[    0.245302] io scheduler cfq registered (default)
[    0.245513] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
[    0.245775] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[    0.245799] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
[    0.245827] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
[    0.245841] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
[    0.246397] brcmstb_memc f1102000.memc-ddr: registered
[    0.246421] brcmstb_memc f1182000.memc-ddr: registered
[    0.246626] brcm-waketimer f0417580.waketimer: registered, with irq 260
[    0.297569] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.299550] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
[    1.090946] console [ttyS0] enabled
[    1.095107] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
[    1.104638] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
[    1.119119] brd: module loaded
[    1.124730] loop: module loaded
[    1.128590] ahci strict-ahci.0: can't get clock
[    1.133243] ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
[    1.150174] ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.158718] ahci strict-ahci.0: flags: 64bit ncq sntf stag clo pmp slum part
[    1.167764] scsi0 : ahci_platform
[    1.171414] scsi1 : ahci_platform
[    1.174952] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
[    1.182885] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
[    1.192191] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
[    1.198591] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
[    1.205877] m25p80 spi32766.0: found mx25l6405d, expected m25p80
[    1.211927] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
[    1.217186] 6 ofpart partitions found on MTD device spi32766.0
[    1.223029] Creating 6 MTD partitions on "spi32766.0":
[    1.228178] 0x000000000000-0x000000200000 : "flash0.bolt"
[    1.234248] 0x000000200000-0x000000240000 : "flash0.macadr"
[    1.240432] 0x000000240000-0x000000280000 : "flash0.nvram"
[    1.246530] 0x000000280000-0x000000300000 : "flash0.devtree"
[    1.252783] 0x000000300000-0x000000800000 : "flash0.avail0"
[    1.258946] 0x000000000000-0x000000800000 : "flash0"
[    1.265540] libphy: Fixed MDIO Bus: probed
[    1.270314] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[    1.287164] libphy: bcmgenet MII bus: probed
[    1.313448] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[    1.321574] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.327424] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.333433] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.340922] usbcore: registered new interface driver pegasus
[    1.346665] usbcore: registered new interface driver asix
[    1.352141] usbcore: registered new interface driver ax88179_178a
[    1.358310] usbcore: registered new interface driver cdc_ether
[    1.364238] usbcore: registered new interface driver cdc_ncm
[    1.386141] xhci-brcm: xHCI BRCM driver
[    1.390117] xhci-brcm f0471000.xhci: xHCI Host Controller
[    1.395684] xhci-brcm f0471000.xhci: new USB bus registered, assigned bus number 1
[    1.403479] xhci-brcm f0471000.xhci: irq 149, io mem 0xf0471000
[    1.409907] hub 1-0:1.0: USB hub found
[    1.413690] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.420960] xhci-brcm f0471000.xhci: xHCI Host Controller
[    1.426513] xhci-brcm f0471000.xhci: new USB bus registered, assigned bus number 2
[    1.434552] hub 2-0:1.0: USB hub found
[    1.438330] hub 2-0:1.0: 2 ports detected
[    1.442606] ehci-brcm: EHCI BRCM driver
[    1.446611] ehci-brcm f0470300.ehci: EHCI Host Controller
[    1.452176] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 3
[    1.469853] ehci-brcm f0470300.ehci: irq 145, io mem 0xf0470300
[    1.481164] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[    1.487550] hub 3-0:1.0: USB hub found
[    1.491326] hub 3-0:1.0: 1 port detected
[    1.495454] ehci-brcm f0470500.ehci: EHCI Host Controller
[    1.501008] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 4
[    1.518678] ehci-brcm f0470500.ehci: irq 146, io mem 0xf0470500
[    1.530163] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[    1.536538] hub 4-0:1.0: USB hub found
[    1.540316] hub 4-0:1.0: 1 port detected
[    1.544614] ohci-brcm: OHCI BRCM driver
[    1.548609] ohci-brcm f0470400.ohci: BRCM OHCI controller
[    1.554171] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 5
[    1.561793] ohci-brcm f0470400.ohci: irq 147, io mem 0xf0470400
[    1.622608] hub 5-0:1.0: USB hub found
[    1.626388] hub 5-0:1.0: 1 port detected
[    1.630513] ohci-brcm f0470600.ohci: BRCM OHCI controller
[    1.636077] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 6
[    1.643697] ohci-brcm f0470600.ohci: irq 148, io mem 0xf0470600
[    1.657166] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.663896] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133
[    1.670615] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.677971] ata1.00: configured for UDMA/133
[    1.682591] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-75J 02.0 PQ: 0 ANSI: 5
[    1.691285] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.698961] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.704390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.708467] sd 0:0:0:0: [sda] Write Protect is off
[    1.708521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.724141] hub 6-0:1.0: USB hub found
[    1.728127] hub 6-0:1.0: 1 port detected
[    1.732385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.738934] ehci-pci: EHCI PCI platform driver
[    1.743476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.749683] ohci-pci: OHCI PCI platform driver
[    1.754429] usbcore: registered new interface driver usb-storage
[    1.760986] mousedev: PS/2 mouse device common for all mice
[    1.766956] i2c /dev entries driver
[    1.770671] gspca_main: v2.14.0 registered
[    1.775125] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    1.782901] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.788572]  sda: sda1
[    1.791312] sdhci: Secure Digital Host Controller Interface driver
[    1.797516] sdhci: Copyright(c) Pierre Ossman
[    1.800563] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.806511] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.813321] mmc0: no vqmmc regulator found
[    1.817429] mmc0: no vmmc regulator found
[    1.851166] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
[    1.859640] mmc1: no vqmmc regulator found
[    1.863750] mmc1: no vmmc regulator found
[    1.867798] usb 4-1: new high-speed USB device number 2 using ehci-brcm
[    1.903163] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    1.915003] usbcore: registered new interface driver usbhid
[    1.920593] usbhid: USB HID core driver
[    1.925015] TCP: cubic registered
[    1.928354] NET: Registered protocol family 17
[    1.935104] Key type dns_resolver registered
[    1.939408] Registering SWP/SWPB emulation handler
[    1.946824] regulator-dummy: disabling
[    1.955795] ALSA device list:
[    1.958790]   No soundcards found.
[    1.989401] hub 4-1:1.0: USB hub found
[    1.993259] hub 4-1:1.0: 4 ports detected
[    1.994803] mmc1: BKOPS_EN bit is not set
[    2.001052] mmc1: new high speed MMC card at address 0001
[    2.006919] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
[    2.011570] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
[    2.017591] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
[    2.023602] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
[    2.030181] ata2: SATA link down (SStatus 0 SControl 300)
[    2.038815] Freeing unused kernel memory: 4020K (c073f000 - c0b2c000)
[    2.046100]  mmcblk0: p1 p2 p3 p4
starting pid 1211, tty '': '/etc/init.d/rcS'
[    2.053079]  mmcblk0boot1: unknown partition table
Mounting virtual[    2.059225]  mmcblk0boot0: unknown partition table
 filesystems
* WARNING: THIS STB CONTAINS GPLv3 SOFTWARE
* GPLv3 programs must be removed in order to enable security.
* See: http://www.gnu.org/licenses/gpl-faq.html#Tivoization
Configuring eth0 interface
[    2.158165] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
Configuring lo interface
Starting network services
starting pid 1251, tty '': '/bin/cttyhack /bin/sh -l'
# [    2.280262] usb 4-1.1: new high-speed USB device number 3 using ehci-brcm
[    2.385524] usb-storage 4-1.1:1.0: USB Mass Storage device detected
[    2.399448] scsi2 : usb-storage 4-1.1:1.0
[    3.660307] scsi 2:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
[    3.672667] sd 2:0:0:0: [sdb] 61831168 512-byte logical blocks: (31.6 GB/29.4 GiB)
[    3.683213] sd 2:0:0:0: [sdb] Write Protect is off
[    3.690253] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.705229] sd 2:0:0:0: [sdb] No Caching mode page found
[    3.710604] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    3.733663] sd 2:0:0:0: [sdb] No Caching mode page found
[    3.739040] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    3.746293]  sdb: sdb1
[    3.751931] sd 2:0:0:0: [sdb] No Caching mode page found
[    3.757309] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    3.763442] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.930967] random: sgdisk urandom read with 90 bits of entropy available
[    4.171264] libphy: f0b00000.etherne:01 - Link is Down
[    4.962382]  mmcblk0:
[    5.031341] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[    6.023556]  mmcblk0: p1
[    6.048274] random: nonblocking pool is initialized
[    7.079286]  mmcblk0: p1 p2
[    8.138896]  mmcblk0: p1 p2 p3
[    9.214139]  mmcblk0: p1 p2 p3 p4
[   16.112330] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to[  112.440220] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  112.447613] reboot: Restarting system
CPU 01
BCM74390011
PRID07251111
v1.19
RR:00000200
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a252b25
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2525
MEMSYS-STD
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FIX
AVS start:status=000000ff
STB: Current voltage=0000038c(908)
 temperature=0000a941(43329)
 PV=0000034d(845)
 MV=0000038c(908)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: *@ ffe0c7c8 <= ffe0c7c8 MEMSYS-0 @ f1100000 OK
DDR1: -
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0704e420
_ebss  0704fc88
_end   0704fca8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0704e420 to 0704fc88 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/
  ,'/___, BOLT v1.19 v1.19 LOCAL BUILD
.'__  ,'  (2016-10-14 22:06:19 doolgun@ubuntu)
   /,'    Copyright (C) 2016 Broadcom
  /'

Board: SF4008_EMMC_DDR4
SYS_CTRL: product=72511, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822080e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) memsys_1_disable(0x00008000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000461: moca2_disable(0x00000001) pcie1_disable(0x00000040) rfm_disable(0x00000020) sata1_disable(0x00000400)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 N/A
RESET CAUSE: 0x000200 software_master (1 of 23 possible causes)
CS0: SFDP SPI, 8MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 1
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.907V, T=+44.303C, PV=0.845V, MV=0.908V, FW=30333278 [0.3.2.x]
USB otp=00000040
Board version 0.92
HCS16SM18T Init
HCS16SM18T Reset
usb: resetting device on bus 1 hub 1 port 1
USB: New high speed device connected to bus 1 hub 1 port 1
usb: resetting device on bus 1 hub 2 port 1
USB: New high speed device connected to bus 1 hub 2 port 1
usb: found Mass-Storage Device 090c:6200
USBMASS: Unit 0 connected
Power Btn Init
LED Init
HDD Power Init
[ssbl/main/linux_dvb_7439.c::linux_dvb_usb_upgrade(653)] LINUX_DVB_DIR_PATH: sf4008
checking usbmass for upgrade
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/update.bin: File found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/force: File not found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/noforce: File found
*** Generic  USB  SD Reader    (31659 MB, lbs=512) ***
*** sf4008/rootfs.tar.bz2: File found
force:0 - noforce:1
[linux_dvb_upgrade:551] disk_number: 0
linux_dvb_wait_upgrade_button done
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
Reading 3401016 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (nikolasi@nikolasi-M61PME-S2P) (gcc version 6.2.0 (GCC) ) #1 SMP Mon Dec 11 10:42:49 EET 2017
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: SF4008_EMMC_DDR4
moving dtb from 0x0000000007628000 to 0x0000000000966804
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296816K/1048576K available (6728K kernel code, 250K rwdata, 2112K rodata, 300K init, 190K bss, 735376K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08aa728   (8842 kB)
      .init : 0xc08ab000 - 0xc08f6000   ( 300 kB)
      .data : 0xc08f6000 - 0xc0934a10   ( 251 kB)
       .bss : 0xc0937000 - 0xc0966804   ( 191 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: link down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /media/nikolasi/niko/pli6-develop/openpli-oe-core/build/tmp/work-shared/sf4008/kernel-source/drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ata2: SATA link down (SStatus 0 SControl 300)
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usb 4-1: new high-speed USB device number 2 using ehci-brcm
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:11 UTC (11)
ALSA device list:
  No soundcards found.
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
 mmcblk0: p1 p2 p3 p4
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 300K (c08ab000 - c08f6000)
INIT: version 2.88 booting
usb 4-1.1: new high-speed USB device number 3 using ehci-brcm
usb-storage 4-1.1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 4-1.1:1.0
rmdir: '/media/hdd': No such file or directory
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
linuxtv: disagrees about version of symbol device_destroy
linuxtv: Unknown symbol device_destroy (err -22)
linuxtv: disagrees about version of symbol __dev_get_by_name
linuxtv: Unknown symbol __dev_get_by_name (err -22)
linuxtv: disagrees about version of symbol init_task
linuxtv: Unknown symbol init_task (err -22)
linuxtv: disagrees about version of symbol device_create
linuxtv: Unknown symbol device_create (err -22)
linuxtv: disagrees about version of symbol sock_create_kern
linuxtv: Unknown symbol sock_create_kern (err -22)
linuxtv: disagrees about version of symbol init_net
linuxtv: Unknown symbol init_net (err -22)
linuxtv: disagrees about version of symbol kernel_sock_ioctl
linuxtv: Unknown symbol kernel_sock_ioctl (err -22)
linuxtv: disagrees about version of symbol sock_release
linuxtv: Unknown symbol sock_release (err -22)
linuxtv: disagrees about version of symbol wake_up_process
linuxtv: Unknown symbol wake_up_process (err -22)
EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
/dev/dvb/adapter0/video0: No such file or directory
scsi 2:0:0:0: Direct-Access     Generic  USB  SD Reader   1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 61831168 512-byte logical blocks: (31.7 GB/29.5 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
random: nonblocking pool is initialized
ALSA: Restoring mixer settings...
/usr/sbin/alsactl: load_state:1735: No soundcards found...
vm.dirty_writeback_centisecs = 300
vm.dirty_background_ratio = 1
vm.dirty_ratio = 60
Starting  platform-util
  • Dreambox DM920 DVB-S2X Multistream Dual Tuner | Octagon SF4008 Triple 4K UHD | Vu+ Uno 4K | Vu+Solo2 | Openbox SX6 HDPVR | DreamBox 7020HD | Openbox PrismCube Ruby | Open SX1 HD и др.

Оффлайн serg_i

  • Подающий Надежды
  • *
  • Сообщений: 2
  • Поблагодарили: 2
OCTAGON SF4008 4K UHD
« Ответ #442: 11 января | 2018г. | 23:10:25 »
Коллеги, прошу помощи! Сегодня получил аппарат, при первом включении, по всей видимости, произошел сбой при выборе разрешения источника отображения и теперь заставка "octagon" исчезла и на экране выдает "нет сигнала", а на дисплее аппарата надпись "starting linuxtv". Больше ничего не происходит, повторные включения-выключения ничего не изменили. По всей видимости, не установилось разрешение 1080 (телевизор full HD), а стало Ultra HD (3840 x 2160). Можно ли повторно запустить первичную установку? Как это сделать? Или проще телевизор 4К найти и изменить разрешение?

Оффлайн sety

  • Джедай Куратор
  • **
  • Сообщений: 3213
  • Поблагодарили: 8759
OCTAGON SF4008 4K UHD
« Ответ #443: 11 января | 2018г. | 23:53:44 »
По всей видимости, не установилось разрешение 1080 (телевизор full HD), а стало Ultra HD (3840 x 2160)
Заходиш по FTP в рес и удаляеш /etc/enigma2/settings перегружаеш тюнер
  • GI S9895 VU+DUO & 2 DUO2 Профессионалы построили Титаник, а любители Ноев Ковчег...

Оффлайн 7000 GI

  • Великий Джедай
  • ****
  • Забанен!
  • Сообщений: 770
  • Поблагодарили: 2009
OCTAGON SF4008 4K UHD
« Ответ #444: 12 января | 2018г. | 00:00:10 »
Заходиш по FTP в рес и удаляеш /etc/enigma2/settings перегружаеш тюнер
Он скорей всего не зайдет,первое включение-еще ничего не настроил...
возможно как вариант, имидж на флеху-заново установка.

Оффлайн orlov

  • Лорд Джедай
  • *****
  • Сообщений: 1831
  • Поблагодарили: 2250
OCTAGON SF4008 4K UHD
« Ответ #445: 12 января | 2018г. | 09:34:16 »
а на дисплее аппарата надпись "starting linuxtv".
Ресивер не загружается!
В ином случае ресивер загрузился бы даже не подключенным к телевизору.
Постоянное сообщение "starting linuxtv" плохой симптом.

Оффлайн arion75

  • Великий Джедай
  • ****
  • Сообщений: 724
  • Поблагодарили: 1819
OCTAGON SF4008 4K UHD
« Ответ #446: 12 января | 2018г. | 10:23:35 »
Можно ли повторно запустить первичную установку? Как это сделать?
Имидж заново попробуйте установить.

Оффлайн nikolasi

  • Совет Джедаев
  • ****
  • Сообщений: 3756
  • Поблагодарили: 14232
OCTAGON SF4008 4K UHD
« Ответ #447: 12 января | 2018г. | 18:44:08 »
еще одна попытка.вышел снова новый драйвер
[sf4008] updtae drivers,
remove temporary kodi support, fix fix start issue and audio issue 2160p
Important, User must flash image new !
собрал с ним.в описании профиксен старт но как видно отрубили на время коди  :lol:
сборка тут
  • et11000, formuler4turbo
Arca costruita da un dilettante, professionisti  creato il Titanic ...;)
Z392888841330 U164774080471 (visa 4149497842976013)
R177825323607 яндекс - 410013614905738

Оффлайн serg_i

  • Подающий Надежды
  • *
  • Сообщений: 2
  • Поблагодарили: 2
OCTAGON SF4008 4K UHD
« Ответ #448: 12 января | 2018г. | 22:03:42 »
Всем огромное спасибо за помощь! Проблему решил банальным подключением к ТВ 4К у друга и изменением настроек на Full HD. Работает аппарат, настраиваю.

Оффлайн romansat

  • Великий Джедай
  • ****
  • Сообщений: 589
  • Поблагодарили: 616
OCTAGON SF4008 4K UHD
« Ответ #449: 12 января | 2018г. | 23:10:42 »
сборка тут

К сожалению дальше вечный booting...
oATV 6.2 от сегодня с новыми дровами грузится нормально.
  • Dreambox DM920 DVB-S2X Multistream Dual Tuner | Octagon SF4008 Triple 4K UHD | Vu+ Uno 4K | Vu+Solo2 | Openbox SX6 HDPVR | DreamBox 7020HD | Openbox PrismCube Ruby | Open SX1 HD и др.

Теги:
 

Похожие темы

  Тема / Автор Ответов Последний ответ
6 Ответов
4911 Просмотров
Последний ответ 22 апреля | 2018г. | 12:04:48
от сергей 999s
5 Ответов
12639 Просмотров
Последний ответ 02 января | 2018г. | 16:23:45
от bary69
0 Ответов
677 Просмотров
Последний ответ 28 января | 2018г. | 10:31:14
от yuriy1975h
0 Ответов
733 Просмотров
Последний ответ 28 января | 2018г. | 10:40:35
от yuriy1975h
0 Ответов
974 Просмотров
Последний ответ 28 января | 2018г. | 10:48:03
от yuriy1975h



X

Добро пожаловать!

Мы заметили, что у Вас установлено расширение AdBlock или ему подобное. Пожалуйста добавьте наш Клуб в белый список, внесите этим посильную лепту в его развитие. Спасибо!