73460012

BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42     2012 Vuplus team
Copyright (C) Broadcom Corporation.

!!!!! UNC read error occurred, while reading from NAND flash
!!!!! UNC read error occurred, while reading from NAND flash
CPU speed:       1305MHz
Total memory(0): 1024MB
DDR Freq:        800 MHz
DDR Mode:        DDR3
DEV TECH:        2048MBIT
DDR Width:       32
Boot Device:     NAND
Total flash:     256MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....

CFE initialized.
USB: New device connected to bus 3 hub 1 port 1
USB: Resetting device on bus 3 hub 1 port 1
USB: Locating Class 08 Vendor 090C Product 1000: Mass-Storage Device
USBMASS: Unit 0 connected
waiting for usb...done
checking usb
Found high priority Mass Storage bus = 3, index  = 0
checking front key
FrontPanel Key : d1, 1
readFrontKey 1 1
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......YES
Checking usbdisk0:/vuplus/solo2/reboot.update......YES
Update
Reading usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin:  Skipping...: File not found
Reading usbdisk0:/vuplus/solo2/initrd_cfe_auto.bin:  Done. 5976879 bytes read

Programming...
done. 5976879 bytes written
Reading usbdisk0:/vuplus/solo2/splash_cfe_auto.bin:  Done. 1036856 bytes read

Programming...
done. 1036856 bytes written
Reading usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin:  Done. 7208960 bytes read

Programming...
done. 7208960 bytes written
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......YES
Loader:elf Filesys:raw Dev:flash0.initrd File: Options:bmem=192M@64M bmem=256M@5
12M
Loading: 0x80001000/12707456 0x80c1f680/113040 Entry address is 0x8048f3e0
Starting program at 0x8048f3e0

Linux version 3.3.6-1.2-g7f330e7-dirty (shcheong@NcshN2) (gcc version 4.5.3 (Bro
adcom stbgcc-4.5.3-2.4) ) #9 SMP Tue Feb 12 10:55:17 KST 2013
Fetching vars from bootloader... found 13 vars.
Options: moca=0 sata=0 pcie=0 usb=1
Using 1024 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 30000000 @ 20000000 (usable)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00050000
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000000 -> 0x00010000
    0: 0x00020000 -> 0x00050000
PERCPU: Embedded 7 pages/cpu @81a09000 s5760 r8192 d14720 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584
Kernel command line: bmem=192M@64M bmem=256M@512M
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
Memory: 566168k/1048576k available (4752k kernel code, 482408k reserved, 1038k d
ata, 6620k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:160
Detected MIPS clock frequency: 1305 MHz (163.126 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 00025a11 (Broadcom BMIPS5000)
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
SMP: CPU1 is running
Brought up 2 CPUs
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
USB1: power enable is active high; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource wktmr
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
fuse init (API version 7.18)
msgmni has been set to 1105
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] enabled, bootconsole disabled 65) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
brd: module loaded
loop: module loaded
brcmstb_nand: NAND controller driver is loaded
Found PHY at Address 3
Config GPHY through MDIO
No PHY detected, not registering interface:1
bcmgenet: probe of bcmgenet.1 failed with error -5
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
SDIO_0: enabling controller
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0x98, Chip ID: 0xda (Toshiba NAND 256MiB 3,3V 8-bi
t)
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha
mming ECC
Bad block table found at page 131008, version 0x04
Bad block table found at page 130944, version 0x04
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e4e0000
Creating 3 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000000000000-0x000010000000 : "entire_device"
0x000000200000-0x000000900000 : "kernel"

Freeing unused kernel memory: 6620k freed
starting pid 434, tty '': '/etc/init.d/rcS'
Mounting virtual filesystems
usb 4-1: new high-speed USB device number 2 using ehci-brcm
Starting mdev
* WARNING: THIS STB CONTAINS GPLv3 SOFTWARE
* GPLv3 programs must be removed in order to enable security.
* See:
Configuring eth0 interface
Configuring lo interface
scsi0 : usb-storage 4-1:1.0
Starting network services
starting pid 475, tty '': '/etc/init.d/rcS2'
Vuplus Update Start..
checking sda ..
checking sda ..
scsi 0:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 31490048 512-byte logical blocks: (16.1 GB/15.0 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
 or FUA
 sda:
sd 0:0:0:0: [sda] Attached SCSI removable disk
checking sda ..
count, 4
sda is to be mounted ..
update_rootfs /mnt/sda
ubiformat: mtd0 (nand), size 235929600 bytes (225.0 MiB), 1800 eraseblocks of 13
1072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 1799 -- 100 % complete
ubiformat: 1788 eraseblocks have valid erase counter, mean value is 18
ubiformat: 12 bad eraseblocks found, numbers: 142, 610, 775, 1092, 1285, 1307, 1
532, 1583, 1796, 1797, 1798, 1799
ubiformat: flashing eraseblock 1054 -- 100 % complete
ubiformat: formatting eraseblock 1799 -- 100 % complete
Rebooting in 9 seconds
Rebooting in 8 seconds
Rebooting in 7 seconds
Rebooting in 6 seconds
Rebooting in 5 seconds
Rebooting in 4 seconds
Rebooting in 3 seconds
Rebooting in 2 seconds
Rebooting in 1 seconds
Rebooting in 0 seconds
The system is going down NOW!
Sent SIGTERM to all processes