Приветствую!
Если подключить USB флеш память в Vu+ Duo, то при запуске ресивера из deep-standby, например, ресивер подвисает, показывает последний выбранный канал, на своём экране показывает что-то типа "Startng ..B", горит красный светодиод и не реагирует на пульт.
Пробовал флешки с FAT и ext2, разных размеров и производителей, с разбиением на разделы и без. Такая блокировка ресивера скорее всего не зависит от имиджа, я использую VTI, но аналогичная блокировка наблюдается и на BH (
link).
Кто-то решил этот вопрос?
Моё письмо на Vu+ суппорт:I've got Vu+ Duo and am using VTI 3.0 image on it. Recently I added 8G USB flash memory stick to the rear panel, created one partition on it and formatted it to ext2 file system using VTI panel (this memory stick was cleared and verified on PC using the "dd if=/dev/zero of=..." command). This memory stick was mounted on /mnt/hdd mount point.
Now, when I start the receiver from shutdown state, it sometimes shows TV channel, shows "Starting..." on VFD display, and red light on VFD display is lighting. Telnet and FTP services are working. The receiver does not respond on remote control. To start my receiver I press On/Off button on remote control single time.
According to messages on English and Russian forums related to Vu+ Duo this problem is seen by other owners, and looks like that there is no dependency on the image type.
More information. When I started to use memory stick, sometimes messages on VFD display are overlapped. For example "Starting..." and "Reading USB..." can mix and produce "Startng ..B" (I do not remember exactly).
Can explain this situation. Thanks.
Вот их ответ:
We are sorry for the trouble you are having.
Your problem is reported to dev. team and I will be back to you after review of dev team.
